Meters & Testing

Multimeter, Fluke Connect, Insulation, Maximum Rating: 400mA AC/DC & 1000V AC/DC, Features: Voltage, Amperage, Resistance (0.1 Mohm - 2Gohm), Frequency, Capacitance, Diode Test, Temperature & True RMS, Includes: Remote Probe, Test Leads, Alligator Clips, Hard Case, (4)

Category: Insulation Testers

Infrared Thermometer Gun, IP54 IR, Features: –22° - 932°F Temperature Range, Backlit Display

Category: Temperature Testers

Digital Multimeter, Maximum Rating 10 Amp, 1000 Volt AC/DC, Includes: AC/DC Voltage, AC/DC Amperage, Resistance, Capacitance, Frequency, Duty Cycle, Temperature, Conductance and Diode Test, Test Leads, Alligator Clips.

Category: Multimeters

Dual Range Non-Contact Voltage Tester 12, Indicates Low Voltage (12 to 48V AC) And Standard Voltage (70 to 1000V AC) Allowing Broad Application, Non-Contact Detection, Lightweight, Compact, Auto Power-Off, IP67: Dustproof and Waterproof

Category: Voltage & Continuity Testers

Clamp Meter, Maximum Rating: 600A, CAT IV 600V, CAT III 1000V, Class 2, Double insulation Safety Rating, Features: True RMS, Amperage, Voltage, Frequency, Resistance, Diodes, Includes: Carrying Pouch, Test Leads and Batteries

Category: AC / DC Clamp Meters

Replacement Test Lead Set For Meters, Right Angle Inputs

Category: Test Lead Sets

Slide-On Alligator Clips, Current: 10A, Max. Voltage: CAT IV 600V, CAT III 1000V, Compatible With: TL175 and TP175 Probes.

Category: Electrical Tester Clips

Process Meter, 250 Ohm HART Resistor, Maximum Rating: 1A AC/DC & 1000V AC/DC, Features: 24V Power Supply for Offline Testing, 1200 Ohm Drive Capability, 250 Ohm Resistor Setting, Infrared Port, True RMS, Frequency, Voltage, Amperage, Diode Test, Continuit

Category: Process Meters

Non-Contact Voltage Tester With Laser Pointer, Dual-Range 70 – 1000V AC / 12 – 1000V AC, Overall Length: 6"

Category: Voltage & Continuity Testers

120V AC GFCI Receptacle Tester, Detects Common Wiring Problems in Receptacles, Confirms Operation of GFCI Protective Devices

Category: Receptacle Testers

Test Probes, Slim Reach, Maximum Rating: 10A AC/DC & 1000V AC/DC, Includes: (1) Red Lead & (1) Black Lead

Category: Test Lead Sets

AC/DC Digital Clamp Meter, Auto-Ranging 400 Amp, Measures AC/DC Current & NCVT Via Clamp & AC/DC Voltage, Resistance, Frequency, DC Microamps, Capacitance, Duty Cycle, Diode Test, & Continuity Via Test-Leads, & Temperature With Thermocouple, Auto-Power Off After 10 Minutes Idle, Includes Carrying Case, Test Leads With CAT III/CAT IV Safety Caps, Thermocouple, Instructions, & 3 AAA Batteries

Category: AC / DC Clamp Meters

Single Range 24-600V AC NCVT w/Flashlight, UL Certified CAT IV 600V AC, 24 to 600 V AC, LED Flashlight In The Tip Operates Independently Of The Tester Functions And Can Be Used To Illuminate The Work Area, Audible Notification Disable, Auto Power Off - After 10 Minutes Of Inactivity (No Button Pressed And No Signals Detected), Low Battery Indication

Category: Voltage & Continuity Testers

The NCVT-4IR provides non-contact determination of AC voltage in cables, cords, circuit breakers, switches, outlets, and wires; as well as Infrared (IR) thermometer measurements making it the perfect choice for HVAC professionals.

Category: Voltage & Continuity Testers

120V AC Circuit Breaker Finder w/Flashlight, NCVT & GFCI CAT II 150V, Quickly and Easily Identifies Circuit Breakers/Fuses Without Disrupting Power On Energized 120V AC Circuits, Clear Visual and Audible Indicators (Audible Can Be Muted), NCVT in Receiver Tip Indicates Presence of AC Voltage Between 80-300V AC, Flashlight in Receiver Operates Independently of the Tester Functions and Can Be Used to Illuminate Work Area, Transmitter Tests Outlet Wiring Configurations (Indicated Via Green/Red LEDs) and Tests GFCIs

Category: Circuit Breaker Finders

True RMS Clamp Meter With Flashlight, Tightsight Series, 600 Amp, 1000 Volt AC/DC, Measures AC/DC Current, AC/DC Voltage, Frequency, Resistance, Continuity, Capacitance, Diodes, Temperature, Low Impedance AC Voltage , Senses AC Voltage,, Probe-Tip Holder, Includes: Soft Case, Test Leads, Batteries, And K-Type Thermocouple

Category: AC / DC Clamp Meters

LASER DISTANCE MEASURER 200FT

Category: Distance Meters

Clamp Meter, Multimeter, Maximum Rating: 999A AC/DC & 1000V AC/DC, Features: True RMS, Amperage, Current, Continuity, Frequency & Resistance, Includes: Soft Carrying Case

Category: Clamp Multimeters

Voltage Tester, Vol-Con, Maximum Rating: 600V AC/DC, Features: Identifies Voltages (5-600V AC/DC), Tests Continuity, Visual/Vibration Indication & LED/Neon Lamps, Includes Test Leads

Category: Voltage & Continuity Testers

Split Jaw Digital Fork Meter, UL Certified CAT IV 600V & CAT III 1000V, Measures 0-200 Amps AC/DC & 0-1000 Volts AC/DC, Measures AC/DC Current, AC/DC Voltage, Continuity, Resistance, Capacitance, Diodes, & Senses AC Voltage, Built-In Flashlight & Dual Backlit Displays, Includes: Soft Case, Test Leads, & Batteries

Category: Multimeters

Non-Contact Voltage Tester with Laser Distance Meter, Full-Range From 12 To 1000 Vac, Frequency: 50 - 500 Hz, CATIV 1000V, Laser: Class II, 630nm to 670nm, Max. Power <1mW, 66" Laser Distance Meter; Measures In Meters, Feet, Or Inches. Batteries: 2 x AAA

Category: Voltage & Continuity Testers

Dual Range 12-1000V AC NCVT w/Flashlight, UL Certified CAT IV 1000V AC, 12-1000 V AC Low Range, 50 To 1000 V AC High Range, LED Flashlight In The Tip, Audible Notification Disable, Auto Power Off, Low Battery Indication

Category: Voltage & Continuity Testers

Digital Light Meter, Max Measurement: 4,000 FC; 40,000 Lux, Includes Carrying Pouch

Category: Light Meters

Clamp Meter With True Rms Provides Accurate And Reliable Measurements Across Various Applications, Measures Ac/Dc Voltage, Ac/Dc Current, Resistance, Dc Micro Amps, Temperature, Diode Test, Continuity, Capacitance, Frequency/Duty Cycle, And Inrush, Transflective Reverse-Contrast Display Provides Excellent Visibility In Both Sunlight And Dark Environments, Illuminated Dial Ensures Clear Visibility And Easy Reading, Even In Low-Light Environments, Features A Low Impedance (Loz) Mode To Identify And Eliminate Ghost Voltages, Preventing False Readings And Ensuring More Accurate Measurements, Integrated Worklight Illuminates The Work Area For Improved Visibility In Dark Or Confined Spaces, Non-Contact Voltage Detection Is Integrated Into The Clamp Jaw, With Audible And Visual Indicators That Intensify As The Clamp Moves Closer To The Voltage Source, Rated Ip40 For Ingress Protection, Withstands Drops From 6.6 Feet (2 M), And Includes Right-Angle Input Test Leads, Thermocouple, Storage Pouch, Instruction Manual, And 3 X Aaa Batteries, Ergonomic Design And Overmold Provide A Comfortable Grip, With Easy Dial Adjustment Using The Thumb, Clamp Body Includes A Side-Mounted Test Lead Holder And A Back Mount That Accommodates An Optional Magnetic Hanger (Cat. Nos. 69445 Or 69417) For Hands-Free Operation

Category: AC / DC Clamp Meters