Meters & Testing

Non-Contact Voltage Tester, UL Certified CAT IV 600V AC, 50 to 600 V AC, Auto Power Off - After 10 Minutes Of Inactivity (No Button Pressed And No Signals Detected), The Tester Will Emit One Long Beep (~0.5s) And Then Shut Off, Note: If The Flashlight Is On, It Will Be Also Shut Off, Low Battery Indication - If Battery Voltage Is Less Than Around 2.4V, The Green LED In The Tip Will Flash 3 Times And The Buzzer Will Send Out One Long Beep, Then Turn Off The Device

Category: Voltage & Continuity Testers

Circuit Breaker Finder Accessory Kit, For use with ET300 Digital Circuit Breaker Finder.

Category: Circuit Breaker Finders

VeriSafe Absence of Voltage Tester, 2 Foot System Cable, 3 Foot Sensor Leads, 600 Volt Maximum, Includes 3.6 Volt Lithium-Ion Battery, 3 Volt Absence of Voltage Threshold, For Use With 3-Phase AC Systems

Category: Absence of Voltage Testers

Flexible AC Current Clamp Meter, 18 Inch Flexible Clamp, 3000 Count LCD Display, Includes Carrying Case, Instruction Manual, and AAA Batteries

Category: AC Clamp Meters

Continuity Tester, Features: Continuity, Current, Resistance, Beeper, Auto-Off, Includes: 4mm Detachable Probes.

Category: Voltage & Continuity Testers

Clamp Meter, Fluke Connect, Maximum Rating: 600A, 600V AC/DC, Features: True RMS, Soft Carrying Case, TL75 Test Leads, (2) Alkaline Batteries

Category: Clamp Multimeters

Test Probes, Industrial, SureGrip, Maximum Rating: 10A AC/DC & 1000V AC/DC, Includes: (1) Red Lead & (1) Black Lead

Category: Test Lead Sets

Fluke Tlk-225 Sure Grip Kit

Category: Basic Electrical Test Kits

Afci /Gfci Outlet Tester Rt310 Detects The Most Common Wiring Faults In Standard, Afci, And Gfci Electrical Outlets Test Afci Devices By Simulating Arc Fault Conditions Test Gfci Devices By Simulating Ground Fault Conditions Capable Of Detecting A Dual-Open Wiring Fault With Simultaneous Open Neutral And Open Ground Wires (Patent Pending Technology) Tester Delivers Clear Visual Indication Of The Wiring Condition At The Electrical Outlet Designed To Test North American-Style Grounded Electrical Outlets In 120V Ac Circuits (Incorporates A Three-Pin Plug) Electrical Plug Is On A 10-Inch (254 Mm) Flexible Electrical Cord To Access Electrical Outlets In Difficult To Reach Locations Low Battery Indicator And Easily Accessible Battery Compartment; Uses 3 X 1.5V Aaa Alkaline Batteries (Included) Powers Off Automatically After Approximately 2 Minutes Of Non-Use To Conserve Battery Life Built To Withstand A 6.6-Foot (2 M) Drop Catiii 135V Safety Rating Measurement Category Iii Is Applicable To Test And Measuring Circuits Connected To The Distribution Part Of The Building’S Low-Voltage Mains Installation The Rt310 Features A Patent Pending Afci Test Method That Is Unique To Klein Tools

Category: Receptacle Testers

Electrical Alligator Clips, 1000 Volt, 10 Amp, SureGrip, Compatible With: TL222 and TL224 Test Leads, Includes: (1) Pair.

Category: Electrical Tester Clips

Multimeter, Digital, Industrial Standard, Maximum Rating: 10A AC/DC & 1000V AC/DC, Features: AC/DC Voltage, AC/DC Amperage, Resistance, Capacitance, Frequency, Duty Cycle, Temperature, Conductance & Diode Test, Includes: Test Leads (TL224), Alligator Clip

Category: Multimeters

Test Leads, Insulated, SureGrip, Maximum Rating: 10A AC/DC & 1000V AC/DC, Length: 1.5 m, Includes: (1) Red Lead & (1) Black Lead

Category: Test Lead Sets

Non-Contact Voltage Tester Detects Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets, and Wires, High Intensity, Bright Green LED Indicates the Tester is Operational and Aids in Illuminating the Workspace, When Voltage is Detected, a High Intensity, Bright Red LED Illuminates and a Beeping Sound is Generated, Auto Power-Off Feature Conserves and Extends Battery Life, 50 to 1000V AC Power Operating Range Allows Broad Application, Receptacle Tester is Designed to Detect the Most Common Wiring Problems in Standard Receptacles: Open Ground, Reverse Polarity, Open Hot, Open Neutral, Hot/Ground Reversed, Kit Comes With NCVT1P Non-Contact Voltage Tester, RT205 GFCI Receptacle Tester, Instructions, and All Required Batteries

Category: Voltage & Continuity Testers

Voltage Continuity Tester, UL Certified CAT IV 600V, 0-600V AC/DC, Measures AC/DC Voltage, Low Impedance AC Voltage (Lo Z) (For Ghost Voltage Dissipation), Automatically Identifies AC Or DC Voltage And Determines DC Polarity And Tests For Continuity And GFCI Operation, Backlit Display And Flashlight

Category: Voltage & Continuity Testers

True-RMS Clamp Meter, AC/DC Voltage: 600, AC/DC Current: 400 Amp, Frequency Limit: 5.0 to 500.0Hz, Safety Rating: CAT III 600V, CAT IV 300V

Category: AC / DC Clamp Meters

Multimeter With Automatic Ranging True Root Mean Square (TRMS) Technology For Increased Accuracy, Tester Measures Up To 1000V AC/DC Voltage, 10A AC/DC Current And 60 MOhms Resistance Plus Temperature, Capacitance, Frequency, Low Impedance (LoZ), Duty-Cycle, Test Diodes And Continuity, High visibility, Reverse Contrast Display With Optical Sensor To Automatically Optimize Viewability In Dark Or Bright Ambient Lighting, Low Impedance (LoZ) Mode For Identifying And Eliminating Ghost Or Stray Voltages, Low Battery Indicator And Easily Accessible Battery And Fuse Compartment, Tough Meter Built To Withstand A 6.6-Foot (2 m) Drop And Is Rated IP42, Includes Carrying Pouch, Test Leads, Thermocouple With Adapter, And Batteries, CAT IV 600V Safety Rating, For Use In Basic And Controlled, Electromagnetic Environments Such As Residential, Business And Light-Industrial Locations

Category: Multimeters

Circuit Analyzer with Large Color LCD Displays Easy to Understand Results for Wiring Faults, AFCI, GFCI, Voltage Drops and Time to Trip Devices, Detect and Identify Common Wiring Faults in Standard, AFCI and GFCI Electrical Outlets, Detects Dual (Open Neutral/Open Ground) Wiring Faults, Inspect AFCI and GFCI Devices; Includes Trip Time and Trip Current, 12A, 15A, and 20A Load Testing to Measure Percentage Voltage Drops, Powers Off Automatically After 5 Minutes of Inactivity to Conserve Battery Life, Detachable Cord for Easy Storage, For Use With North American 120V AC 3-Wire Electrical Outlets, Safety Rating: CAT III 135V, Includes (3) x AAA Batteries, Instructions, and Pouch

Category: Receptacle Testers

Multimeter, Maximum Rating: 10A AC/DC & 1000V AC/DC, Features: True RMS, AC/DC Voltage, AC/DC Amperage, Resistance, Capacitance, Frequency, Temperature & Manual/Automatic Ranging, Includes: 9V Battery, Test Leads, Temperature Probe (80BK) & Users Manual

Category: Multimeters

Clamp Meter, Multimeter, Maximum Rating: 99mA AC/DC, Features: Measures mA without Breaking Circuit

Category: Clamp Multimeters

Premium Non-Contact Voltage and GFCI Receptacle Electrical Test Kit, Includes: RT250: Electrical Receptacle Tester with LCD, NCVT3P: Non-Contact Voltage Tester with Flashlight, Manuals, (4) x AA Batteries & Storage Pouch

Category: Voltage & Continuity Testers

Voltage Tester Provides Non-Contact Detection of 70 to 1000V AC in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Non-Tamper-Resistant Outlets and Wires, Durable Tester is Dustproof and Waterproof with an IP67 Rating and 9.8-Foot (3 m) Drop Protection, When Voltage is Detected, a High Intensity, Bright Red LED Illuminates and an Audible Tone Will Sound, GFCI Tester Detects the Most Common Wiring Problems in Standard and GFCI Receptacles: Open Ground, Reverse Polarity, Open Hot, Open Neutral, Hot/Ground Reversed, Includes NCVT1XT Non-Contact Voltage Tester; RT210 GFCI Outlet Tester, Instructions, and All Required Batteries

Category: Voltage & Continuity Testers

Dual Display Digital Clamp Meter Allows Users To See Readings In Tight Space Areas, Ac/Dc Clamp Meter With True Rms Provides Accurate And Reliable Measurements Across Various Applications, Measures Ac/Dc Current And Ncvt Via Clamp; Ac/Dc Voltage, Resistance, Continuity, Frequency/Duty Cycle, Dc Microamps, Diode Test And Capacitance Via Test Leads; Temperature Via Thermocouple, Backlit Reverse-Contrast Lcds For Clear Data And Best Viewability In All Environments, Withstands Drops From 6.6 Feet (2 M), And Includes Right-Angle Input Test Leads, Thermocouple, Storage Pouch, Instruction Manual, And 2 X Aa Batteries, Ergonomic Design Provides A Comfortable Grip, With Easy Dial Adjustment Using The Thumb, Non-Contact Voltage Detection Is Integrated Into The Clamp Jaw, With Audible And Visual Indicators That Intensify As The Clamp Moves Closer To The Voltage Source, Clamp Body Includes A Side-Mounted Test Lead Holder And A Back Mount That Accommodates An Optional Magnetic Hanger (Cat. Nos. 69445 Or 69417) For Hands-Free Operation

Category: AC / DC Clamp Meters

PDT VS-CKP14-6 VeriSafe Insul

Category: Voltage Detectors

Electrical Alligator Clips, SureGrip, Current: 10A, Max. Voltage: CAT IV 600V, CAT III 1000V, Compatible With: TL222 and TL224 Test Leads.

Category: Electrical Tester Clips