Search results

OFR20 Single Channel, Low Voltage 1-piecOne-piece single channel low voltage raceway with adhesive tape backing for data cable routing along top of modular furniture partitions. Available in 8' lengths.

Category: 1-Piece Non-Metallic Raceway Elbows

Office Furniture Raceway Four Cubicle DropFour cubicle drop fitting. Allows the transition from office furniture raceway run horizontally along partition wall to office furniture corner raceway mounted vertically in four cubicles at the intersection of partitions. Fitting maintains 1" minimum ben

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Fire box adapter for use with LD10/LDPH10 profile raceway.NOTE: For low voltage applications only, Off White, ABS, Length 2.00 in.

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

Office Furniture Raceway Right Angle FitRight angle fitting. Used to join sections of office furniture raceway at 90° flat junction. Supplied with adhesive tape, Medium Tone.

Category: 1-Piece Non-Metallic Raceway Elbows

Office Furniture Corner Raceway BaseOffice furniture corner raceway base. Used to terminate low voltage data cabling in the corner at the intersection of modular office furniture panels. Accepts 70mm standard faceplates. Available in 6' lengths.

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Office Furniture Raceway Double Spill-Over FittingDouble spill-over fitting. Fitting is used to spill over both sides of the furniture partitions at the same location. Incorporates a built-in, yet removable end cap that eliminates the need for additional raceway and fittings to terminate the pathway. Off

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Office Furniture Raceway Coupler FittingCoupler fitting. For use with office furniture raceway, Medium Tone.

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Twin-70 raceway base, 8 foot length. Supplied with pre-punched mounting holes. 2' of cover needed for every 1' of Twin-70 base.

Category: 2-Piece Non-Metallic Raceway

Tamper resistant one-piece surface raceway. Supplied with pre-applied adhesive backed tape, Off White, PVC, Length 10.00 ft, Width 0.77 in.

Category: 2-Piece Non-Metallic Raceway

Raceway Tee FittingTee fitting. Used to create an undivided tee junction between sections of office furniture raceway. Supplied with adhesive tape, Medium Tone.

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Raceway One Cubicle Drop Bypass FittingOne cubicle drop bypass fitting. Allows the transition from office furniture raceway run horizontally along partition wall, around existing furniture pole, to office furniture corner raceway mounted vertically in one cubicle at the intersection of partiti

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Transition fitting. Used to transition to any LD profile or T-45 raceway, Off White.

Category: 2-Piece Non-Metallic Raceway Connectors & Adapters

Raceway Wall Entrance FittingWall entrance fitting. Allows entry from wall to office furniture raceway run horizontally along partition walls. Fitting includes bend radius protection and trim plate to cover wall opening. Requires minimum wall opening of 4.5in W x 3.0in H (114.3mm x 7

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Office Furniture Corner Raceway End CapCorner raceway end cap fitting. Opening allows cord passage through fitting such as monitor and keyboard cables. Supplied with adhesive tape, Office Gray.

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Raceway Outside Corner FittingOutside corner fitting. Used to join sections of office furniture raceway at outside corner. Supplied with adhesive tape. Medium Tone.

Category: 1-Piece Non-Metallic Raceway Elbows

Long Coupler FittingLong coupler fitting (with base). Used to bridge office furniture raceway between panel sections. Can also be used to fill void left by spill-over fitting, when furniture partitions are reconfigured. Supplied with adhesive tape. Medium Tone.

Category: 1-Piece Non-Metallic Raceway Elbows

Office Furniture Corner Raceway CoverOffice furniture corner raceway cover. Available in 6' lengths.

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Office Furniture Raceway Coupler FittingCoupler fitting. For use with office furniture raceway, Office Beige.

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Office Furniture Corner Raceway CoverOffice furniture corner raceway cover. Available in 6' lengths.

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Raceway Mid Panel Tee FittingMid-panel tee fitting. Used to connect communication pole to office furniture raceway run horizontally along partition wall. Supplied with adhesive tape.Note: not intended for use at intersection of furniture panels. Medium Tone.

Category: 1-Piece Non-Metallic Raceway Elbows

Office Furniture Raceway Spill Over FittingSpill-over fitting. Allows transition from office furniture raceway run horizontally along partition wall to office furniture vertical raceway in one location. Adjustable fitting maintains 1in minimum bend radius of cabling and works with various panel wi

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Raceway Two Cubicle Drop Bypass FittingTwo cubicle drop bypass fitting. Allows the transition from office furniture raceway run horizontally along partition wall, around existing furniture pole, to office furniture corner raceway mounted vertically in two cubicles at the intersection of partit

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Office Furniture Raceway Desk Mount BoxDesk mount box. Box accepts office furniture snap-on faceplates as well as 70mm NEMA standard screw-on faceplates. Designed for use with OFVR5

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Office Furniture Raceway 4 Way Cross FitCross fitting. Used to join sections of office furniture raceway at four corners. Supplied with adhesive tape, Medium Tone.

Category: 1-Piece Non-Metallic Raceway Clips & Couplings