Raceway - Non-Metallic

End Cap, 3/4", 2-Piece, PVC, Ivory, 10 Individual/bag

Category: 1-Piece Non-Metallic Raceway End Fittings

Panduct® type FS solid wall wiring duct, 4 W x 2 H, 6' length, PVC, white, no mounting holes.

Category: 2-Piece Non-Metallic Raceway

Attaches any 4x4 FiberRunner® Fitting or Channel to the 4x4 Fiber-Duct™ Channel, S4X4YL6 or E4X4YL6. Includes solid cover.

Category: 1-Piece Non-Metallic Raceway Elbows

Panduct® type FS solid wall wiring duct, 1.5 W x 1.5 H, 6' length, PVC, white.

Category: 2-Piece Non-Metallic Raceway

Optional split hinged cover for the channel FR6X4BL6. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables. Snap-on hinge feature enables positioning of cover at angles between 30° and 90°.

Category: 2-Piece Non-Metallic Raceway Covers

Panduct® type FS solid wall wiring duct, 3 W x 3 H, 6' length, PVC, black, no mounting holes.

Category: 2-Piece Non-Metallic Raceway

Panduct® type FS solid wall wiring duct, 6 W x 4 H, 6' length, PVC, white, no mounting holes.

Category: 2-Piece Non-Metallic Raceway

The optional cover for the reducer from 24x4 FiberRunner® to 12x4 FiberRunner® FRRF2412BL is black and made of ABS plastic. The snap-on feature allows the cover to be installed and removed with no tools required.

Category: 2-Piece Non-Metallic Raceway Covers

Panduct® type FS solid wall wiring duct, 4 W x 4 H, 6' length, PVC, black, no mounting holes.

Category: 2-Piece Non-Metallic Raceway

Pre-assembled coupler quickly joins two sections of hinged channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 5/16" nut driver to allow coupler to be removed if necessary, Black.

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Panduct® type FS solid wall wiring duct, 1.5 W x 1 H, 6' length, PVC, light gray.

Category: 2-Piece Non-Metallic Raceway

Raceway, Solid Wall, PVC, 4.25" x 3.12" x 6', Light Gray

Category: 2-Piece Non-Metallic Raceway

Panduct® type FS solid wall wiring duct, 4 W x 3 H, 6' length, PVC, white, no mounting holes.

Category: 2-Piece Non-Metallic Raceway

Conduit entrance end fitting. This power rated two-piece fitting is designed to accommodate the entrance of 1/2" conduit or align with knockouts on surface mount electrical boxes. For use with LD3/LDPH3 and has breakouts available to work with LD5/LDPH5 a

Category: 2-Piece Non-Metallic Raceway End Fittings

Inside corner fitting for use with LDPH5 and LDS5 raceway, Electric Ivory, ABS, Length 2.11 in.

Category: 1-Piece Non-Metallic Raceway Elbows

W-mold 5547-wh Transition Ft

Category: 2-Piece Non-Metallic Raceway Connectors & Adapters

For branches of raceway running at right angles. 1" [25mm] bend radius.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Non-Metallic, Device Bracket, 40N2 / 60N2 Series. Size: 5-1/4" Length, 2-3/16" Width. For use with Ortronics TracJack Individual Jack System, Ortronics Series II Front-Loading Module System, and Wiremold Open System Communications Modules. Color: White.

Category: 2-Piece Non-Metallic Raceway Covers

PN 10 Series Radiused External Elbow. For right angle turns around external corners. Finish - White

Category: 1-Piece Non-Metallic Raceway Elbows

For right angles turns around external corners. White

Category: 2-Piece Non-Metallic Raceway Elbows

PN5 Series Drop Ceiling Connector for dropping cables from ceiling into the raceway. Has 1/2" and 3/4" concentric trade size KOs. Includes PN153R Reducer Adapter for use with PN03 Series Raceway. Finish - Ivory

Category: 2-Piece Non-Metallic Raceway Connectors & Adapters

Non-Metallic, Tee Fitting, PN10 Series. Size: 2-11/16" Length, 5-5/16" Width. PVC, Ivory.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

For right angle turns on the same surface. 1" [25mm] bend radius.

Category: 1-Piece Non-Metallic Raceway Elbows

Non-Metallic, Flexible Corduct. 1400 Series. Size: 10' Length, 3" Width, 20/32" Height. Color: Brown.

Category: Non-Metallic Overfloor Raceway