Search results

Conduit Hanger With Bolt, Rigid Size: 3/8 x 1/2 Inch, EMT Size: 1/2 Inch, Steel, For Use With EMT/Rigid/IMC Conduit

Category: Conduit Clamps

Flex Connector, Type: Squeeze, 1/2 Inch, Die Cast Zinc, For Use With Flexible Metal Conduit

Category: Set Screw Flex Connectors

Sealing Locknut With PVC Molded Seal, 3/4 Inch, Threaded, Steel, For Use With Rigid/IMC/EMT Conduit

Category: Gasketed Conduit Locknuts

Weatherproof FS Box, 1-Gang, 1/2 Inch Lap Siding, UV Rated Plastic, Features: 1/2 Inch Lap Siding, Application: GFCI, Standard: UL, CSA, Material: UV Rated Plastic, Size: 3.31 Inch X 2.07 Inch X 5.09 Inch, Construction: One Piece, Cubic Capacity: 18.6 Inch

Category: Non-Metallic Surface Mount Switch / Outlet Boxes

Liquidtight Connector, 90°, 2 inch, UV Rated Plastic, Sealing Ring, Material: Non-Metallic, For Non-Metallic Liquidtight - Type B; Flexible Non-Metallic Tubing, UL, CSA

Category: 90 Degree Non-Metallic Liquidtight Flex Connectors

Reducing Washer, 3/4 Inch x 1/2 Inch, Material: Steel

Category: Reducing Washers

Offset Nipple, 2 Inch, Zinc Die Cast

Category: Zinc Die Cast Offset Nipples

Combination Coupling, EMT to Flex, 1 Inch to 1 Inch, Screw-In Compression, Zinc Die Cast

Category: Die Cast Flex To EMT Couplings

Wallplate Insert, Decorator, Brush-style Opening, White

Category: Cable Access Wallplate Inserts

Box Extender, 4/0 Ceiling, Non-Metallic. Color: White. Depth: 1-1/2". For use with: 3-1/2" and 4" Round or Octagonal Boxes.

Category: Non-Metallic Box Extenders

Pulling Elbow, 1/2 Inch, 90°, Female/Female, Gasketed, With Cover, Zinc Die Cast, For Use With Rigid/EMT

Category: Zinc Die Cast Rigid Elbows

Beam Clamp, Size: 1 Inch, Threaded Rod Size: 1 Inch, Material: Plated Steel.

Category: Beam Clamps - Adjustable

Twin Screw zinc die-cast all-purpose 1/2" knockout connector for Flex, AC, MCI, and NM cable. Secures into knockout with a locknut. Has a cable range of 0.600" to 0.825" and an end stop of 0.615".

Category: Straight Squeeze Flex Connectors

1-Gang, Vertical Mount, Weatherproof, Non-Metallic, Recessed Electrical Box with In-Use Cover, Depth: 1-1/2". Cubic Inches: 22". Clear. Includes: (1) Duplex, (1) Decorator/GFCI Receptacle Faceplate and (1) NM Cable Connector. For use in Stucco & Textured Surface Application

Category: Recessed Weatherproof In-Use Boxes

2-Gang, Nail-On, Switch/Outlet Box, Non-Metallic, Depth: 3.875 Inch, Cubic Inches: 22.5, Adjustable for Wall Thickness from 1/4 Inch to 1-1/2 Inch, Mounts Directly to Wood/Steel Stud

Category: Non-Metallic Switch / Outlet Boxes With Brackets

Box Connector, 1/2", UF , Compression Type

Category: Straight Non-Metallic Cord Grips

Grounding Bushing, 3 Inch, Threaded, Insulated, 14 to 2/0 AWG, Zinc Die Cast, For Use With Rigid/IMC Conduit and Dual-Rated for CU/AL

Category: Threaded Ground Bushings

EMT Conduit Strap, 1-Hole, Extra Duty, 1-1/4 Inch Diameter, Steel, For Use With EMT Conduit

Category: Steel 1-Hole Conduit Straps

Knockout Seal, 2 Inch, Snap-In, Steel

Category: Steel Knockout Seals

Zinc die-cast, 1/2" UF connector with low profile design for smaller and standard sized underground feeder cable.

Category: Straight Steel Cord Grips

3/8 inch, AC/Flex Connector, 90°, 2-Screw Clamp, Zinc Die Cast, For Use With Armored Cable and Flexible Metal Conduit

Category: 90 Degree Two Screw Squeeze Flex Connectors

Sealing Locknut, 1 Inch, Threaded, Steel, For Use With Rigid/IMC/EMT Conduit

Category: Gasketed Conduit Locknuts

Fan/Fixture Mounting Block with Built-In Electrical Box, Non-Metallic, Textured & Paintable Surface. Fan Weight: 70 lbs. Fixture Weight: 200 lbs. Cubic Inches: 14.5". Includes: (1) NM Cable Connector & (4) Parked Screws. For use on Sloped up to 90 Degree

Category: Non-Metallic Angled Ceiling / Fixture Boxes

EMT Compression Connector, 2 Inch Diameter, Raintight and Concrete Tight, Steel

Category: Steel Raintight EMT Compression Connectors