Search results

Cord-Ended Table BoxCord-Ended Table Box, Surface/Beveled 9 1/4" Cover with (2) Duplex Receptacles and (6) Ortronics® Category 6 RJ45 Jacks and can Accept up to (10) Extron® Electronics MAAP Device Plates

8IN CORE-PREWIRED-For tile, wood and laminate concrete floor coverings. For use in 8" (203mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover assembly is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. Includes one (1) 8TS Tile Shim. INCLUDED: For Side Compartments: Two (2) proprietary 20A Duplex Receptacles installed. For Center Compartment: No device plates are provided. For Bottom Feed Compartment: One (1) 5BLH 1/2-Gang Blank Housing (Tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA.) Three (3) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit), One (1) 8DIV 8" Divider, One (1) 8TS Tile Shim. NOTE: UL Fire Classified for up to 2-hour rated floors. Receptacles can be wired as a standard or isolated ground device. Brass

WIR ZBM277Y ZONEMASTER 200

IMB/RJ BRACKET

WIR KC10CM8 DEQUORUM WORK SURFACE

WAL-MART BEVERAGE POLE

WIR ZE120Y ZONEMASTER 400 120/208V

CRFB ASSEMBLY W/INSERT COVER-ALUMINIM

WIR 2127G

WIR SRD10 CG SRG 6 OUT

ONE SET OF (2) GROMMETS

COMM POKE THRU ASSY DPLX PLT BK

SRV FTG (1) TELE PLT 11/4IN DIA

WIR ZB120Y ZONEMASTER 200 120/208V

WM SPRAY ENAMEL MET

5000 Raceway CoverNon-Metallic, Cover, 5000 Series. Size: 8' Length, 5-1/4" Width. PVC, Maple Finish.

Np300 10ft 6in Box End, (2) 20a Rec

Steel, Cover Clip, 2100 Series. Size: 3/8" Width, 1-1/4" Length. Ivory.- obsolete

Two circuits with two 20A resettable circuit breakers and two lighted remote LCD digital ammeters. Eighteen 20A outlets with T-slots, black housing. 12' (3.6m) cord. Length 54" (1.4m). Includes two (2) 7' (1.2m) patch cables, two (2) remote displays, and one (1) rack mountable faceplate.

4IN COVER ASSEMBLY SURFACE AL

WIR AL241FPB-6A FACEPLATE FOR LAB BENCH WORK PORTAL

S4000 DEVICE PLATE WITH 1.4 INCH DIA. OPENING

WIR NP3DD152B NP300 15FT 2IN BOX

CVR ASSY-BRUSH ALUM-PARTITION