Search results

Floor Box Divider Plate with Graduated Cubic Inch Markings. PVC. Size: 5-1/4". Box Quantity: 1.

Category: Recessed Floor Box Service Dividers

6IN PREWIRED FLUSH STYLE ASSEM AA

Category: Assembled Poke-Through Units

Non-Metallic, Internal Elbow, PN10 Series, Size: 2-1/8" Length, PVC, White

Category: 1-Piece Non-Metallic Raceway Elbows

Surface Style Floor Cover Assembly with Insert, Material/Finish: Die Cast Aluminum/Black

Category: Square / Rectangle Recessed Box Covers

For connection of equipment grounding conductor to provide additional ground to raceway.

Category: Large 2-Piece Metallic Raceway Clips, Connectors, & Couplings

For use as internal or external elbow, straight-through fitting, tee, or cross (one G6001TX required for tee or straight through fitting, two for cross, not included). Ivory

Category: Large 2-Piece Metallic Raceway Elbows

For covering unused compartments in the device bracket. White

Category: 1-Gang Raceway Box Covers & Faceplates

For mounting devices 12" (305mm) on center using 3027AE, 3033JE, 3036HE, 3040CE, 3043, 3046, 3048R and 3051LE Series Device Plates. Gray

Category: Small 2-Piece Metallic Raceway Covers

Designed especially for use in the installation of signal system and alarm wiring. Base has 1/2" trade size KOs. Larger gang boxes available by special order. Two-gang: 4 3/4" L x 4 3/4" W (121mm x 121mm). Accepts NEMA double-gang standard faceplates. NOTE: Certified to Canadian Safety Standards for sale in Canada. When ordering these products, change the "V" color prefix to "vc" or the "WH" color suffix to "WHC" to denote the Canadian versions. White

Category: 2-Gang Raceway Device Boxes

5' Nonmetallic Pancake Overfloor Raceway. Accepts up to 1/2" cable diameter. Black

Category: Non-Metallic Overfloor Raceway

Round, Adjustable Floor Box, Steel, Depth: 2-3/4 Inch, Cubic Inches: 39 Inch, Knockouts: Sides: (1)-1/2 x (1) 3/4 & (1) 3/4 x (1) 1 Inch, Bottom: (2) 1/2 Inch & (2) 3/4 Inch, Adjustments: 1-3/4 Inch (Before Pour) or 1/2 Inch (After Pour)

Category: Recessed Adjustable Floor Boxes

RACKET PRO DIVIDER

Category: Recessed Floor Box Service Dividers

WMD RFBA4R25OG RFBA 4G 2.5 IN

Category: Recessed Compartment Boxes

Steel, Prewired Plugmold, Length: 5 ft. Color: White. Outlets (12") O/C: Total Outlets: (5) 15A, 125V: Single Circuit, Single Outlets.

Category: Single Circuit Steel Plugmold

Aluminum, Wire Clip, AL Series.

Category: Small 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Upper Panel Device Plate, 1-Gang, Duplex Receptacle, Metallic. For Use with AF Series Raised Floor Boxes.

Category: Recessed Compartment Box Device Plates

Radiused Divided 90° Internal Elbow, 2400 Series, for Fiber Optics, Size: 4", Steel, Includes (2) Couplings, Ivory

Category: Small 2-Piece Metallic Raceway Elbows

Recessed Prewired Surface Style Poke-Thru Assembly, Diameter: 8 Inch, Depth: 3-1/4 Inch, Gray Die Cast Aluminum Cover, Includes (2) Pre-Installed 20 Amp Duplex Receptacles.

Category: Assembled Poke-Through Units

Steel, Seam Clip, 4000 Series. Gray.

Category: Large 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Non-Metallic, 2-Gang, Extra Deep Device Box, 2300 Series. Size: 4-3/4" Length, 4-7/8" Width, 2-3/4" Depth. PVC, Ivory.

Category: 2-Gang Raceway Device Boxes

Steel, Prewired Plugmold, Length: 6 ft. Color: Ivory. Outlets (12") O/C: Total Outlets: (6) 15A, 125V: Dual Circuit, Single Outlets

Category: Dual Circuit Steel Plugmold

4-1/4" Round Cover, Metallic, Cover Type: Two Door/Dual Service. Device Type: Duplex Receptacle. Color: Brass. For use in Tile Applications.

Category: Round Recessed Box Covers

Non-Metallic, 2-Gang, Sure Snap Device Box, NM2000 Series. Size: 4-3/4" Length, 4-7/8" Width, 1-3/4" Depth. PVC, Ivory.

Category: Plugmold Device Boxes

Steel, External Cover, 2000 Series. Size: 1-7/8". Ivory.

Category: Small 2-Piece Metallic Raceway Elbows