Search results

Non-Metallic, FiberReady 2" Radius Full Capacity Internal Elbow, 5400 Series. Size: 4" Diameter. PVC, Ivory.

Category: 2-Piece Non-Metallic Raceway Elbows

For carpet, tile and wood covered floors. For use in on-grade and above grade concrete floor applications. Box is provided with a protective, disposable cover that allows the box to be installed at any point in the construction process. Box is available with an epoxy

Category: Square Recessed Floor Boxes

Non-Metallic, Wire Clip, 2400 Series. Size: 1"

Category: Small 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Tele-Power Pole Accessory Pack. Includes: (2) Ceiling Trim Plates, (1) Hanger Clamp Assembly, (1) Feed End Fitting, For use with: 25dTP-4, AMDTP-4 Series.

Category: Tele-Power Pole Mounting Kits

Flush Brass Carpet Flange Only With Mounting Screws

Category: Square / Rectangle Recessed Box Flanges

Floor Box, 6 Gang, Evolution Series, 4.130 x 13.750 x 16.130 Inch, 915.980 Cubic Inches, Aluminum, Includes Protective/Disposable Cover, Tunnel System For Connecting Two Modules, (2) Removable Modules, (2) Toggle Clamps, (2) Cable Management Guides, (2) Levelling Support Legs, (2) "L" Brackets, and Knockouts Ranging from 3/4 - 2 Inch

Category: Square Recessed Floor Boxes

3000 Rigid Inside Coupling (Galvanized) Fitting G3001A

Category: Small 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Non-Metallic, Twin Snap Cover Device Bracket, 5400 Series. Size: 6" Length, 2-1/2" Height. PVC, Ivory.

Category: 1-Gang Raceway Device Brackets & Plates

4 Inch Poke-Thru Multi-Service Device, Includes: (4) 20A Duplex Receptacles, Ortronics TracJack Mounting Adapters and Ortronics Series II Communication Housing, Aluminum

Category: Assembled Poke-Through Units

Non-Metallic, Tee Fitting, 5400 Series. Size: 6-18/32" Length, 7-23/32" Width. PVC, Ivory.

Category: 2-Piece Non-Metallic Raceway Tee Fittings

Unit includes four prewired 20A receptacles. Each duplex receptacle is wired as separate circuit. The duplex can be wired as a standard receptacle or isolated ground. Finish flange available in gray (GY), black (BK), ivory (VY) or brushed metal finishes in aluminum (AL), and brass (BS). Aluminum and brass flanges shipped with black slide cover. Brass flange also available with nonmetallic brass colored slide holder (AB). Aluminum flange also available with nonmetallic aluminum colored slide holder (AA). Includes Wiremold Open System unloaded adapters to accept four discrete keystone connectors from most manufacturers. Unit also includes Ortronics TracJack Mounting adapters and Ortronics Series II Communication Housing. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC4 Series Poke-Thru Devices require a 4 (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8 minimum. RC4 Assembled Unit-Aluminum Finish Flange Black Slide Holder, 2-20A Duplex Standard or IG and Cat 6 Connectors.

Category: Assembled Poke-Through Units

2000 Raceway Base and Cover, 5' Length, Steel, White

Category: Small 2-Piece Metallic Raceway Bases & Covers

Steel, Ground Clamp, 2000 Series. Size: 1-7/32".

Category: Small 2-Piece Metallic Raceway Grounding Clamps

Non-Metallic, Twin Snap Wire Clip, 5400 Series. Size: 2-5/8" Length. PVC, Ivory.

Category: 2-Piece Non-Metallic Raceway Clips & Couplings

Device Plate, 1-1/2-Gang Type: GFCI, 106 Style Devices for Power and Audio/Video Applications, Metallic

Category: Poke-Through Mounting Plates

6' Plugmold Tamper-Resistant Multioutlet System Black

Category: Single Circuit Steel Plugmold

Upper Panel Device Plate, 1-Gang, Metallic, Blank. For Use with AF Series Raised Floor Boxes.

Category: Recessed Floor Box Service Fittings

Steel, Tee Fitting, 500, 700 Series. Size: 2-1/2". White.

Category: Metallic Raceway Tee Fittings

Steel, 2-Gang, Divided Over Raceway Box, 2400 Series. Size: 2-3/4" Depth. Ivory.

Category: 2-Gang Raceway Device Boxes

1/2" trade size KOs located on end, sides, and bottom of fitting. 3/4" KOs on bottom and rear. Includes ground screw. Gray

Category: Small 2-Piece Metallic Raceway End Fittings

Raceway Ground Clamp, 2400 Series

Category: Small 2-Piece Metallic Raceway Grounding Clamps

For surfaces at right angles, or for use as a straight-through fitting. Solid leg of base has concentric 1/2" and 3/4" trade size KOs. Gray

Category: Small 2-Piece Metallic Raceway Clips, Connectors, & Couplings

One-gang 3/4" trade size conduit housing assembly. Includes junction box attached to 3/4" trade size conduit for electrical power connections. NOTE: When using on a 6ATCFF Furniture Feed unit, 1BHA (sold separately) is required.

Category: Poke-Through Mounting Plates

Steel, Side Reducing Connector, 2400 Series. Size: 2" Length. Ivory

Category: Small 2-Piece Metallic Raceway Clips, Connectors, & Couplings