Search results

4000 Series Raceway Transition Fitting Wiremold OFR89-4000

Category: Metallic Overfloor Raceway Connectors & Adapters

Communications Cover Plate, Rectangular, 2 Inch and 3/4 Inch Plugs, Aluminum

Category: Square / Rectangle Recessed Box Covers

Right angle turns on the same surface. Finish - Gray

Category: Small 2-Piece Metallic Raceway Elbows

Steel, Two Channel Power/Data Pole. 1-17/32" X 2-3/4", 10' 5" High. (4) Spec Duplex Outlets 20A, 125V, Ivory

Category: Steel Power Poles

.050" (1.3mm) stainless steel. Base has two 9/32" (7.1mm) diameter KOs 1 1/4" (32mm) from each end and every 18" (457mm) on center throughout. Available in 10' (3m) lengths. Also available in lengths precut to customer specifications.

Category: Large 2-Piece Metallic Raceway Bases

Multiple Service Floor Box Cover Kit, All Aluminum

Category: Round Recessed Box Covers

.040" (1.0mm) stainless steel. S4000C-5 is available in 5' (1.5m) lengths, packed ten 5' (1.5m) lengths per carton. Also available in lengths precut to customer specifications. (Max. 5' (1.5m) lengths.)

Category: Large 2-Piece Metallic Raceway Covers

Adjusting ring (with three adjusting screws) for use with 437 Attaching Rings - power for brass fitting only. 3 25/32" (96mm) O.D.

Category: Recessed Floor Box Service Fittings

31/2IND 60INL STL BODY

Category: 2-Piece Non-Metallic Raceway

For mounting power and communication devices in-line with 5400 Series Raceway. Utilizes 5507 Series Faceplates, Wiremold Open System communication modules, Ortronics TracJack and Series II inserts, and Pass and Seymour Activate Series Inserts. For faceplate options, see 5507 Series Faceplates. NOTE: CM-EPLA End Plates are required when using Wiremold communication modules and Pass and Seymour Activate inserts. S2-EPL End Plates are required when using Ortronics Series II Inserts. To mount TracJack inserts, use 5507-4TJ or 5507-6TJ Faceplates. White

Category: 1-Gang Raceway Device Brackets & Plates

Mounts standard duplex devices to cover. Can also be used with 106 communication frames.

Category: Plugmold Covers

6IN PREWIRED SURF STYLE ASSEMBLY SN

Category: Poke-Through Cover Assemblies

2-Gang, Cover Plate Flange, Metallic, Color: Brass. WxL: 7.624" x 4.524". For use on: 880S2, 880M2, 880CS2-1, 880CM2-1 Floor Boxes in Tile Applications

Category: Square / Rectangle Recessed Box Flanges

Prewired Poke-Thru Device, 4 Inch Diameter, Dual Service, Includes: (1) 20 Amp Duplex Receptacle, (1) 42A Device Plate, (1) 4MAAP Device Plate, Brushed Aluminum

Category: Assembled Poke-Through Units

Non-Metallic, 2" Bend Radius Flat Elbow, 2400 Series. Size: 6-1/2" Length. PVC, Ivory.

Category: Small 2-Piece Metallic Raceway Elbows

Steel, Power/Data Pole. Color: Ivory. Length: 10'5". (2) Spec Duplex Outlets, 20A, 125V, With (1) Communications Insert Mounting Adapter, (1) Dual Cat 5e insert, (2) Blank Inserts & Labels

Category: Steel Power Poles

Recessed Prewired Poke-Through Assembly With Surface Style Cover, 4 Inch Diameter, Aluminum Cover With Satin Nickel Finish, For Use in Tile, Wood, Terarazzo Applications

Category: Assembled Poke-Through Units

Surface Style Cover with Solid Lid, Material/Finish: Die Cast Aluminum/Gray

Category: Square / Rectangle Recessed Box Covers

Poke-Thru, Flush Style Cover Assembly, Diameter: 7-1/4 Inch Round, Black

Category: Poke-Through Cover Assemblies

Surface style, die-cast aluminum cover assembly with one (1) 3/4" trade size screw plug opening, and one (1) concentric 2" - 1 1/4" trade size screw plug opening. Cover assembly is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. 6CFFTC Series cover assemblies designed for use with 6STC Poke-Thru Stem Assemby. Includes one (1) 3/4" and one (1) 1/2" trade size conduit fittings and one (1) divider to separate devices. Black

Category: Poke-Through Cover Assemblies

Single-gang device plate that accepts standard 20A duplex receptacle or duplex Turnlok receptacle. Fits in any one (1) of the three (3) gangs in the center compartment. Devices supplied by others.

Category: Recessed Floor Box Service Fittings

Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly. Insert in lid allows for carpet or tile cutouts to match finished floor. Finish - Gray

Category: Square / Rectangle Recessed Box Covers

Flangeless cover for use in tile installation. Die-cast aluminum assembly. Lid area is flush with the finished floor, no cutouts provided. Finish - Aluminum

Category: Square / Rectangle Recessed Box Covers

WLK 175CHA-LJB 1-GANG 3/4IN C

Category: Poke-Through Mounting Plates