Search results

Includes 6" diameter poke-thru stem assembly with a disposable plate. Devices are recessed 3 1/4" (83mm) below floor surface. No cover assembly is included. No device plates are included. For use with the following cover assemblies (purchased separately): 6CTC and 6CT Series. INCLUDED: For Side Compartments: No Device Plates are provided. For Center Compartment: No Device Plates are provided. For Bottom Feed Compartment: One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly, One (1) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors.

Category: Assembled Poke-Through Units

Recessed Unwired Surface Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Gray

Category: Assembled Poke-Through Units

Bare Concrete & Terrazzo Ring – Nonmetallic ring for use on bare polished concrete and terrazzo floor applications. NOTE: Ring must be attached to the floor box before pouring concrete or terrazzo.

Category: Square / Rectangle Recessed Box Covers

For AMDTP-4 and AMTC-4 Series. 8" (203mm) long. Communication covers for additional voice/data connectors. Each cover includes KOs for four RJ11/RJ45 connectors (.760" x .576" (19.3mm x 14.6mm)), mouse hole for exiting communication cables (grommet furnished).

Category: Aluminum Power Poles

6' Steel Plugmold Multioutlet Strip with 4 single receptacles spaced 18", GB Finish - Ivory

Category: Single Circuit Steel Plugmold

8" Round Cover Assembly, Evolution Series, Metallic, Cover Type: Surface, Material/Finish: Die-Cast Aluminum/Gray Powder-Coat.

Category: Poke-Through Cover Assemblies

W-mold Amdtp-a 20a125v Pwrdis t Pole

Category: Power Pole Covers

For 15A and 20A decorator receptacles.

Category: Large 2-Piece Metallic Raceway Cover Plates

In-Wall Storage Box with Flange, Allows Compatibility With Standard 3.5" Studs & 2.5" Studs, Drywall And Stud Mountable, Knockouts For Single Gang Outlets And 1-1/4", 1", & ½"Conduit, Integrated Universal Zip Tie Anchor Points, Enclosure UL 2416 Listed For Installation Of AV, IT & Communication Technology Equipment: Stores A Large Variety Of AV Components, Landscape/Portrait Installation, L: 9", H: 14.25" , D: 3.9", White

Category: Recessed Home Entertainment Boxes

Wmd Alds4010a Alds4000 Entran

Category: Large 2-Piece Metallic Raceway End Fittings

Wmd Al3311 90d Flat Elbow

Category: Plugmold Elbows

For mounting one or two keystone device modules. Has one opening and one KO. Gray

Category: 1-Gang Raceway Box Covers & Faceplates

<p>Single duplex opening faceplate.</p>

Category: Recessed Floor Box Service Fittings

Device Cover for AL3000 Series Raceway, Duplex 5-20R

Category: Large 2-Piece Metallic Raceway Cover Plates

W-mold 437-11/2 Attaching Rin g

Category: Recessed Floor Box Service Fittings

Kit Comes Complete With Adapter Ring To Secure Into The Boxes, (1) 3/4" Trade Size Screw Plug And Conduit Fitting For Power, 1-1/4" Trade Size Screw Plug And Conduit Fitting For Low Voltage (Communications Or Audio/Video) Services

Category: Round Recessed Box Covers

Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly. Provided with one 1" trade size screw plug for power or communication type cabling and one combination 1 1/4" and 2" trade size screw plug for communication type cabling. Allows for feeding both power and communication cabling. NOTE: Add suffix ôTRö to the end of the part number to indicate tamper-resistant cover assembly. Tamper-resistant versions are secured with a single tamper-resistant screw. Gray

Category: Square / Rectangle Recessed Box Covers

Drop-in rubber grommet for pass-through cabling. Set of two grommets (one grommet shown) in black.

Category: Assembled Poke-Through Units

WMD EFBCLL EVOLUTION FLR BOX

Category: Recessed Floor Box Tools

Flangeless Blank Cover Assembly, No Cut-Out, Color: Nickel, Material: Die-Cast Aluminum

Category: Square / Rectangle Recessed Box Covers

Decorative wall box cover designed to fit onto the 4-gang hinged wall box (EHWB4). Cover comes complete with a hinge that allows the cover to open a full 180 degrees, an integrated handle with lock and key set, and an egress door that allows the cables to exit the box flush against the wall. The cover is offered in two powder-coated finishes white: EHWBC4-WH or black EHWBC4-BK.

Category: Recessed Compartment Box Covers

<p>Installed either before or after concrete pour to create activation from duct. 1"" height.</p>

Category: Recessed Floor Box Service Fittings

W-mold 4230 3" Afterset Box

Category: Recessed Compartment Boxes

Flangeless Cut-Out Cover Assembly, For Use In Tile Applications, Material: Die Cast Aluminum, Color: Black

Category: Square / Rectangle Recessed Box Covers