Search results

WMD EFBCMG EVOLUTION FLR BOX

Category: Recessed Floor Box Tools

Recessed Unwired Flush Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Bronze

Category: Assembled Poke-Through Units

For mounting up to four power and communication devices at one location. Utilizes 5507 Series Faceplates, Wiremold Open System communication modules, Ortronics TracJack and Series II inserts, and Pass and Seymour Activate Series inserts. For faceplate options, see 5507 Series Faceplates. NOTE: CM-EPLA End Plates are required when using Wiremold communication modules and Pass and Seymour Activate inserts. S2-EPL End Plates are required when using Ortronics Series II inserts. To mount TracJack inserts, use 5507-4TJ or 5507-6TJ Faceplates. White

Category: Small 2-Piece Metallic Raceway Connectors & Adapters

Connects end of 3000 Series Raceway to 1 1/2" trade size conduit or armored cable.

Category: Metallic Raceway Connectors & Adapters

Kit comes complete with adapter ring to secure into the boxes, (1) 3/4" trade size screw plug and conduit fitting for power, 1-1/4" trade size screw plug and conduit fitting for low voltage (communications or Audio/Video) services.

Category: Round Recessed Box Covers

Non-Metallic, Modular Furniture Adapter, 5500 Series. Size: 4-1/4" Length, 1-7/8" Width. PVC, White.

Category: 1-Gang Raceway Box Covers & Faceplates

For branch raceway at right angles. Provides 2" (51mm) cable bend radius control for fiber optic and UTP/STP cable installations. Couplings included. Ivory

Category: Small 2-Piece Metallic Raceway Tee Fittings

Accepts six Ortronics TracJack inserts. Finish - Ivory

Category: 1-Gang Raceway Box Extension Adapters

For installation of one rectangular receptacle. Complete with necessary bridges.

Category: Large 2-Piece Metallic Raceway Cover Plates

End Ftg W/ 1/2 In.& 3/4 In. Ko

Category: Plugmold End Fittings

Aluminum housing and base 9 1/4'' x 4 1/2'' x 2 1/2'' (235mm x 114mm x 64mm) are provided with four (4) 1'' trade size knockouts in base for hardwiring unit and two dividers which allow units to be divided on either the ''X'' or ''Y'' axis/plane. Accommodates a variety of power (NEMA or decorator), and supports Ortronics and Wiremold Open Systems connectivity. Portals are field configurable by ordering the corresponding faceplates

Category: Recessed Compartment Box Covers

WMD G20GB606TR

Category: Single Circuit Tamper Proof Plugmold

Wire Clip, Diameter: 3/4"

Category: Large 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Wiremold S1mc Mud Cap

Category: Octagon Metallic Box Mud Rings

Recessed Unwired Surface Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Bronze

Category: Assembled Poke-Through Units

Plugmold Multi-Outlet System, 10 Single Outlets, 304 Stainless Steel, Length: 5 Feet.

Category: Single Circuit Tamper Proof Plugmold

WMD 838TAL-880CS3 3-GANG AL T

Category: Square / Rectangle Recessed Box Flanges

Angled Raceway Adapter, Fits 5507 Series Faceplate Opening, White

Category: Communication Module Adapters For Metallic Raceway

WLK RC7CTCAA RC7 COVER AL FLA

Category: Assembled Poke-Through Units

Floor Box Assembly, Round, Type: 15 Amp Quad Receptacle, Diameter: 4 Inch, (3) 1/2 Inch Knockouts, Material/Finish: Aluminum/Aluminum, For Use in Raised Floor or Wood Floor Applications.

Category: Assembled Recessed Round Boxes

For RPSFB, RFSFB-OG, and RPNFB floor boxes. Kit comes complete with (2) prewired 20A duplex receptables, (receptables can be wired as standard receptacle, or isolated ground), flange and slide holder, adapter ring to secure into the boxes, divider (RP-DIV), Wiremold CM series open system adapters (unloaded), Ortronics Series II and TracJack adapters. Modular jacks sold seperately.

Category: Round Recessed Box Covers

Surface style, die-cast aluminum cover assembly with one (1) 3/4" trade size screw plug opening, and one (1) concentric 2" - 1 1/4" trade size screw plug opening. Cover assembly is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. 6CFFTC Series cover assemblies designed for use with 6STC Poke-Thru Stem Assemby. Includes one (1) 3/4" and one (1) 1/2" trade size conduit fittings and one (1) divider to separate devices. Gray

Category: Poke-Through Cover Assemblies

WMD WWE-P WHITE PAINT PEN

Category: Touch Up Paint

Mini Adapter Cover Plate, Accepts (3) Wiremold CM2 Series Communication Connectivity Inserts, Length: 12 Inches, Provides a Flush Installation, Includes Cover and 6 Amp Mini Adapter, (6A-Opening).

Category: Large 2-Piece Metallic Raceway Cover Plates