Search results

PERMA TC-1700 PVC SPRAY PAINT

1-1/2 AL MARK 9 LB FITTING

Perma-Cote pulling elbows are used at 90 degree bends in conduit runs to allow straight pulls at bends, to serve as pull outlets for stiff conductors, to allow for service entrance into buildings or to allow conductor entrance into motors. Electrical cont

PCP PMHS-907 2-1/2 PIPE STRAP 2 HOLE STAMPED

PCP PMEL-400X90-A 4X90 AL STANDARD ELBOW

PCP PMEYSEF-125 1-1/4 EXPANDED FILL SEALING FI

Perma-Cote Sealing Fittings are used in conduit runs to stop gasses, vapors or flames from migrating from one part of the conduit system to another. This limits the spread of any potential explosion, enhancing safety. The PVC and urethane coatings of the

Perma-Cote ST style knockout hubs are used to terminate conduit runs through the wall of a sheet metal electrical enclosure. They are available with or without grounding lug. STTB style hubs are "Through-Bulkhead" fittings used to pass conduit runs throug

PCP PMGLL7 2-1/2 GROUNDING BUSHING

Perma-Cote Sealing Fittings are used in conduit runs to stop gasses, vapors or flames from migrating from one part of the conduit system to another. This limits the spread of any potential explosion, enhancing safety. The PVC and urethane coatings of the

PCP PMEYAM-100 1 M/F SEALING

Perma-Cote reducing couplings are used to connect two pieces of conduit of different size. They are available in 17 different size combinations.

Gll Grounding Bushings Gll Style Pvc Coated Threaded Grounding Bushings Have Analuminum Lug For Copper Or Aluminum Grounding Conductors. Re Reducers Re Style Reducers Reduce Conduit Hubs To A Smaller Size. They Are Provided With An Integral Bushing To Pr

Gll Grounding Bushings Gll Style Pvc Coated Threaded Grounding Bushings Have Analuminum Lug For Copper Or Aluminum Grounding Conductors. Re Reducers Re Style Reducers Reduce Conduit Hubs To A Smaller Size. They Are Provided With An Integral Bushing To Pr

PCP PMEL-200X90-A 2X90 AL STD ELBOW

PCP PM500-CON-A 5 AL CONDUIT

PCP PMS232 FS/FD 2 GANG COVER

Spring Door Single Cover 1 3/8" (f)

Factory bent standard radius elbows are available and ready to ship. Factory bent elbows are more accurate, quicker to install and more economical, because they save field bending time and do not waste materials. Electrical continuity is maintained across

PCP PMUBC-75 3/4 RT ANGLE BEAM

PCP PMRE51 1-1/2 - 1/2 REDUCING

Gll Grounding Bushings Gll Style Pvc Coated Threaded Grounding Bushings Have Analuminum Lug For Copper Or Aluminum Grounding Conductors. Re Reducers Re Style Reducers Reduce Conduit Hubs To A Smaller Size. They Are Provided With An Integral Bushing To Pr

PCP PMEL-300X90X24 3X90X24 LG

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as w