Search results

Eaton power device receptacle, Range, #12 - 4 AWG, 50A, Flush, 125/250V, Back, Black, NEMA 14-50R, Three-pole, Four-wire, Three-pole, four-wire, grounding, Screw, Glass-filled nylon, Power, Used with S21

Category: 50 Amp Straight Blade Receptacles

Definite Purpose Contactor, 2-pole, 50 Amp, Lug Terminals, 120 Vac

Category: 2-Pole Definite Purpose Contactors

Eaton CH Ground Bar Kit,Ground bar kit, 21 terminals, two central mounting holes,,Ground bar kit,400 A,CH,Single- and Three-phase,0.75 in,1- and 3-phase 400AA CH loadcenters

Category: Circuit Breaker Mounting Kits

Load Center, Main Lug Kit, 125 Amp, 120/240 Volt AC, 1-Phase, #10 - 1/0 AWG, Used With Convertible CH Loadcenters

Category: Load Center Lug Kits

200a/2p Hd Fusible Safety Switch 600v W/neut NEMA 3r

Category: 2-Pole 600 Volt Fused Heavy Duty Safety Switches

Miniature Industrial Ground Fault Equipment Protector, Type Qcgfep, Cable-in/cable-out, 2-poles, 20 Amp, 120/240 Vac, 10 Kaic

Category: Cable-In / Cable-Out Ground Fault Circuit Breakers

Electronic Timer, Hours/Minutes, High Voltage, 8 Digit, 24 X 48 Mm, 1/32 Din Rail, Lcd, Battery Powered

Category: Electronic Hour Meters

CUT FAZ-B20/1-NA

Category: 1-Pole DIN Rail Mount Circuit Breakers

Eaton CH 3/4 in Loadcenter Accessories, CH plug-on neutral surface cover for 150A or greater convertible loadcenter, X7

Category: Copper Bus Load Center Covers

C-H 37MM240R1240 COMMERCIAL S

Category: Commercial Meter Stacks

Inductive Proximity Sensor, Tubular, Unshielded, End Sensing Surface, 4 Mm (0.16inch) Sensing Range, 2-wire, 20-250 Vac, 50/60 Hz, 12 Mm Diameter, Threaded Barrel, 3-pin Ac Micro Connector, Standard Frequency, N.o. Output

Category: Premium Inductive Proximity Sensors

ETN PSG480E24RM General Purpo

Category: 1-Phase DC Power Supplies

ETN 15RBA4-100E RBA expulsion

Category: E-Rated Fuses

FAZ UL 1077 SUPPLEMENTARY PROTECTOR 3P 3A B CURVE

Category: 3-Pole DIN Rail Mount Circuit Breakers

CCV Breaker, 125A, 3 Pole, 120/240V, 10kAIC, Load Lugs Only

Category: 3-Pole Main Circuit Breakers

Inductive Proximity Sensor, Tubular, Shielded, End Sensing Surface, 5 mm (0.20 Inch) Sensing Range, 2-Wire, 20-250 Volt AC, 50/60 Hz, 18 mm Diameter, Threaded Barrel, 3-Pin AC Micro Connector, Standard Frequency, Normally Open, Output

Category: Premium Inductive Proximity Sensors

6 Hole Neutral Assembly With 2/0 Lug

Category: RV Power Pedestal Accessories

Quicklag Industrial Thermal-Magnetic Circuit Breaker, Two-pole, 100A, 22 kAIC, 240V, Bolt-on

Category: 2-Pole 120/240V Bolt-On Circuit Breakers

Padlockable Handle Lock, For G-Frame Breaker, Locks in the "off" position.

Category: Molded Case Circuit Breaker Locking Devices

Shunt Trip With Pigtail Leads, 110-240 Vac, Right-pole Mounting, For L- And M-frame Breaker

Category: Molded Case Circuit Breaker Shunt Trips

Breaker, Molded Case, Handle Extension, N-Frame

Category: Molded Case Circuit Breaker Operating Handles

100 AMP, 2-Pole, Heavy Duty Safety Switch, Fusible, 240 VAC, 250 VDC, NEMA 1

Category: 2-Pole 240 Volt Fused Heavy Duty Safety Switches

Service Entrance Barrier Kit for K and L Frame with SEK4/6. H x L x W: 16 Inch x 8 Inch x 6 Inch.

Category: Wireway Barrier Kits

400 Amp, 2-Pole, Heavy Duty Safety Switch, Non-fusible, 600 Volt AC, 600 Volt DC, NEMA 1

Category: 2-Pole 600 Volt Non-Fused Heavy Duty Safety Switches