Search results

Contactor, NEMA Size 0, 20 Amp, 115/120 Volt AC Coil, Open, 3-Pole, 600 Volt AC

Category: NEMA Contactors - Non-Reversing

Neutral Kit, 100 Amp, Fusible, 600 Volt VAC, 14 AWG - 1/0 AWG CU, 12 AWG - 1/0 AWG AL

Category: Safety Switch & Disconnect Neutral & Ground Kits

400A MAIN SWITCH ENCL

Category: Meter Mains - without Distribution

THB RC10-516X EXP INS NYL RIN

Category: Nylon Insulated Ring Tongues

Steel City® LN-208 Conduit Locknut, 3 in, For Use With Rigid/IMC Conduit, Die Cast Zinc

Category: Die Cast Conduit Locknuts

Compression Lug - Ring Tongue Terminal, Straight, 1-Hole Mount, Standard Barrel, Copper, Tin Plated, For Code, AN Aircraft or Flexible Copper Cables, 2 AWG, 5/16 In Bolt Hole, Inspection Hole, Packed 100 per Box

Category: Non-Insulated Ring Tongues

Wire Connector - High Temperature, Screw-On, 18 - 14 AWG Copper, Black, Phenolic Shell, 300 Volts, Carton of 1000

Category: High Temperature Wire Connectors

Aluminum One-Hole Lug, Long Barrel, Blind End, Max 35kV, Wire Size #10 AWG, 1/4 Inch Bolt Size, Tin Plated, Die Code 21, Die Color Code Red

Category: 1-Hole Long Barrel Aluminum Compression Lugs

Compression Buttsplice, Long Barrel, Copper, Electro-Tin Plated, For Copper Conductors, 750 kcmil, Color Code: Black

Category: Long Barrel Copper Compression Sleeves

Contactor/Starter, Replacement Contact Kit, Size 4, 3-Pole, 300/200 Line

Category: Starter & Contactors - Replacement Contact Kits

Locknut, Type: Bonding, Size: 1/2 Inch, Steel, For Use With Rigid/IMC Conduit

Category: Grounding Conduit Locknuts

Starter/Contactor, Replacement Coil, 24 Volt AC, Size 00/0/1

Category: Starter & Contactor Replacement Coils

Conduit Hub, 1-1/4 Inch, Threaded, Material: Stainless Steel

Category: Stainless Steel Conduit Hubs With Grounding

Tubular Ring Terminal, Length 1.37 Inches, Width .55 Inches, Bolt Hole 1/4 Inch, Wire Range 4/4AN, Copper, Tin Plated

Category: Non-Insulated Ring Tongues

Type C Conduit Body, 3/4 IN Hub, 7, 6.6 cu-in, Malleable Iron, Zinc Plated/Epoxy Powder Coated

Category: Type C Iron Conduit Bodies

30 Amp, 1-Pole, Miniature Industrial Circuit Breaker, Lug In/Lug Out Type, Q-Line Series, 10 kAIC, 120/240 VAC.

Category: 1-Pole Cable-In / Cable-Out Circuit Breakers

STC HL-604 1-1/4 FEM PULL ELL

Category: Zinc Die Cast Rigid Elbows

Pin Terminal, Nylon Insulated, Wire Range: 22 - 18 AWG, Color: Red, Material/Finish: Copper/Tin

Category: Nylon Insulated Pin Terminals

Thb 54460 35kv 1h 1/2" Stud 2/0 Cable

Category: 1-Hole Long Barrel Copper Compression Lugs

1-1/4 Inch Pipe Strap, Steel for Use with Rigid/IMC Conduit

Category: Steel 1-Hole Conduit Straps

Equipment Ground Kit, PowerMark Plus, (14) Circuit, # 14 - 8 AWG, Copper or Aluminum Wire, 20 per Package

Category: Load Center Neutral & Ground Bars

THB ST050-462S STL JKTD FTG H

Category: Single Barrel MC / AC Connectors

Heat Shrink, Heavy-Wall, 250 - 500 MCM, 48 Inch, Black, 2 Inch Minimum Expanded I.D., .63 Inch Maximum Recovered I.D., .16 Inch Nominal Recovered Wall

Category: Heavy Wall Heat Shrink

Copper Two-Hole Lug, Long Barrel, Peep Hole, Max 35kV, Wire Size #2-#3 AWG, 1/2 Inch Bolt Size, 1-3/4 Inch Hole Spacing, Tin Plated, Die Code 33, Die Color Code Brown

Category: 2-Hole Long Barrel Copper Compression Lugs