Search results

OZG RB-357A RDC BSHG AL 4 TO

OZG YG-080604 CAST IRON JB

OZG CSBE-500P-0 COND SEAL BUS

OZG RB-332A RDC BSHG AL 2 TO

2 GANG CAST DEV CVR BLANK

OZG 4Q-9500 5" 90 DEG CN LFMC

Conduit Hardware, Bushings, Insulating, Trade Size: 5 Inch, Material: Malleable Iron, Connection Type: Threaded, Maximum Temperature Rating: 150 Degree C, Features: For Rigid and IMC, With Bronze Lug, Outside Diameter: 6 1/16 Inch, Width: 1 1/4 Inch, Grou

OZ-Gedney Ground-Tite Type 4Q-FML Grounding Liquidtight Combination Coupling, Trade Size: 1-1/2 IN, Length: 2-1/16 IN, Flexibility: RMC And IMC, Malleable Iron Body And Nut, Steel Ferrule, Connection: FNPT Hub, Third Party Certification: UL File Number E-24264, CSA 009795, Applicable Third Party Standards: UL 467, CSA C22.2 No. 41, Federal Specification W-F-406E, NEMA : FB-1, Hazardous Locations: Class I, Division 2 per NEC 501.4(B), Class I, Zone 2 per NEC 505.15(C)(2), Class II, Division 1 per NEC 502.4(A)(1)(e), Class II, Division 2 per NEC 502.4(B)(2), Class III, Division 1 per NEC 503.3(A)(2), Class III, Division 2 per NEC 503.3(B), Intrinsically Safe per NEC 504.20, For Threaded Rigid Conduit And IMC

OZG NEPBA PUSHBUTTON BLK 1NO

OZG PLG350CA 3-1/2" AL CLOSE-

OZG NZ121268 MOUNTING PANS

OZ-Gedney Type ABJ Bonding Jumper, Size: 2 IN, Clamps And Connecting Strap: Aluminum, U-Bolts And Nuts: Stainless Steel, 14 IN Strap, Third Party Certification: UL File Number E-24264, CSA 11584, Applicable Third Party Standards: UL 467, CSA C22

OZG ECGJH-200-12 2 X 12" FLEX

OZG ECGJH-150-30 1-1/2 X 30"

OZG GUAC-100A HAZ LOC COND OU

OZG NESS31MNL

OZG ECGJH-75-4 3/4 X 4" FLEX

OZG EYD-50

1-1/2-2 IN HAZ LOC PULLING ELB

OZG NGUB984A JUNCTION BOX

OZG EYM-100 1" VERT SEAL FITT

2-1/2 TO 1-1/2 RDC BSHG

UNIV GND CLAMP

OZ-Gedney Type IBC-L-AC Insulated Grounding Bushing With Lug, Size: 3-1/2 IN, Malleable Iron Body, Aluminum Lug, Steel Clamping Screw And Set Screws, Finish: Zinc Plated Body, Tin Plated Lug, Zinc Plated Clamping Screw And Set Screws, Connection: Threaded, 150 DEG C, 14 - 4 AWG Grounding Wire, 4-1/2 IN Outside Diameter, 1 IN Width, 2-7/8 IN Turning Radius With Lug, Third Party Certification: UL File Number E-24264, CSA 009795, Applicable Third Party Standards: UL 467, CSA C22.2 No.41, Federal Specification W-F-408E, NEMA : FB-1, For Rigid Conduit And IMC