Search results

OZG CH350T 3-1/2 HUB

OZG V-4005-1 CABLE SUPPORT

Rigid Conduit Reducer Coupling, Large End Trade Size 1-1/2 Inch, Small End Trade Size 1-1/4 Inch, Material Zinc Electroplated Malleable Iron, Size 2-1/2 Inch Dia x 2 Inch L, Enclosure Class I Div 1 2 Group A B C D, Class II Div 1 2 Group E F G, Class III, Approval CSA C22.2, Applicable Standard NEC 500 to 503/505, Constructional Feature Dust Ignitionproof, Explosion-Proof, Used On Threaded IMC/Rigid Metal Conduit

OZG CHM-600T 6" COND HUB RMC/

OZG YT-060604 CAST IRON JB

Conduit Hardware, Bushings, Non-grounding, Type: Plug, Trade Size: 1 1/2 Inch, Material: Polyethylene, Features: Threaded Rigid And Imc

OZG EYDX-50 1/2" 40 PERCENT D

OZG LBH-1520A 1-1/2-2" HAZ LO

OZG ECGJH-150-36 1-1/2 X 36"

OZG PLG400CA 4" AL CLOSE-UP P

Rigid Conduit Body, Access Opening Left Side, Configuration LL, Hub Location 90 Deg, Number of Hubs 2, Hub Size 3 Inch, Size 10-1/2 Inch L x 4-3/8 Inch W x 5-3/4 Inch H, Installation Threaded, Material Zinc Electroplated Aluminum Enameled Gray Iron, Form Type Form 7, Approval UL 514A, CSA C22.2, Used On Rigid Conduit/IMC, Applicable Standard Federal Specification A-A-50563, NEMA FB-1/FB-2.10, Capacity 126 Cu Inch

OZG FS2BCA 2 GANG AL CAST DEV

Conduit Hardware, Couplings, Armored Cable, Type: Threaded Rigid and IMC to Flexible Metal, Trade Size: 1/2 Inch, Material: Malleable Iron

Conduit Hanger, Type Conduit Hanger with Carriage Bolt and Nut, Trade Size 3-1/2 Inch, Installation Carriage Bolt with Nut, Conduit Type 3-1/2 Inch IMC/EMT/Rigid, Material Steel, Finish Zinc Plated, Size 1-1/4 Inch D x 5-3/8 Inch H, Mounting Hole Size 5/16 Inch (Bolt)

Liquidtight Flexible Conduit Connector, Type Straight Male, Throat Type Insulated, Trade Size 1-1/4 Inch, Material Galvanized Malleable Iron Body, Zinc Electroplated Steel Ferrule, Approval UL 514B, CSA C22.2, Used On Flexible Metallic Liquidtight Conduit, Applicable Standard Federal Specification WF-406E, NEMA, Size 2-1/2 Inch Dia

Conduit Deflection/Expansion Fitting, Trade Size 1/2 Inch, Diameter 2-1/4 Inch, Length 6-3/4 Inch, Maximum Movement 3/4 Inch, 30 Deg, Constructional Feature Concrete-Tight, Raintight, Watertight (NEMA 4), Material Bronze End (Coupling), Neoprene (Sleeve), Stainless Steel (Band), Tinned Copper Braid (Bonding Jumper), Approval UL 514B, CSA C22.2, Used On IMC/Rigid Metal Conduit, Applicable Standard Federal Specification W-F-408E

OZG R-2001-BO CABLE SUPPORT B

Conduit Hardware, Bushings, Non-grounding, Type: Plug, Trade Size: 1/2 Inch, Material: Polyethylene, Features: Threaded Rigid And Imc

Service Entrance Cable Connector, Type Compression, Cable Size (3) 4/0 AWG Braided, (3) 3/0 AWG Neoprene Jacket Cable, Minimum Opening 0.86 Inch x 1.51 Inch, Maximum Opening 1.06 Inch x 1.71 Inch, Trade Size 2 Inch, Thread Length 5/8 Inch, Length 2-1/16 Inch, Diameter 3 Inch, Constructional Feature Watertight, Material Zinc Electroplated Malleable Iron (Body), PVC (Grommet), Zinc Electroplated Steel (Compression Washer), Approval UL 514B, Used On Oval Service Entrance Cable, Applicable Standard W-F-406E

OZG CSMI-1200P SEAL BUSHINGS

OZG 4Q-350TG 3-1/2" STR CN LF

OZ-Gedney Type 4Q-T Liquid Tight Straight Connector, Size: 3-1/2 IN, Connection: Tapered MNPT Hub, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, Insulated Throat, 4-7/8 IN Width, 3-1/2 IN Height, Third Party Certification: UL File Number 11853, CSA 009795, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-406E, NEMA : FB-1, Hazardous Locations: Class I, Division 2 Per NEC 501.4(B), Class I, Zone 2 Per NEC 505.15(C)(2), Class II, Division 1 Per NEC 502.4(A)(1)(e), Class II, Division 2 Per NEC 502.4(B)(2), Class III, Division 1 Per NEC 503.3(A)(2), Class III, Division 2 Per NEC 503.3(B), Intrinsically Safe Per NEC 504.20, For Liquidtight Flexible Metal Conduit

CONTROL OPERATOR

OZG WSK-20-166 TW ENT SE