Search results

Reducing Washer, 3" x 1-1/4", Steel

Category: Reducing Washers

OZ-Gedney Type C - 15L End stopped 2-Screw Connector, Size: 3/8 IN (1/2 IN KO), Connection: Male NPS Hub X Set Screw, Conductor Range: 3/8 - 5/8 IN, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 1-1/16 IN Length X 1-3/8 IN Width, Third Party Certification: UL File Number E-11852, CSA 9795, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-406E, NEMA : FB-1, For Armored Cable

Category: Straight Squeeze Flex Connectors

Conduit Sealing Bushing, Type: CSBE, Size: 5 Inch, 1 to 4 Wires, Material: Malleable Iron

Category: Rigid & IMC Bushings

OZ-Gedney Type LB Conduit Body, 1/2 IN Hub, Length: 4-1/2 IN, 1-1/4 IN Width, Die-Cast Copper-Free Aluminum, Finish: Aluminum Enamel, Connection: Set-Screw, 4.3 CU-IN Volume, Third Party Certification: UL File Number E-18095, CSA 009795, Applicabl

Category: Type LB Aluminum Conduit Bodies

OZG ABLG-6122 6" INS GRD BSHG

Category: Threaded Ground Bushings

Conduit Sealing Bushing, Type: CSML, Size: 3 Inch, 1 to 4 Wire, Material: Malleable Iron

Category: Rigid & IMC Bushings

OZG 4Q-9100TG 1" 90D CN LFMC

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

OZ-Gedney Type LB Conduit Body, 1-1/4 IN Hub, Length: 7-7/8 IN, 2-1/2 IN Width, Die-Cast Copper-Free Aluminum, Finish: Aluminum Enamel, Connection: Set-Screw, 3 (2 AWG) Conductors, 34 CU-IN Volume, Third Party Certification: UL File Number E-1809

Category: Type LB Aluminum Conduit Bodies

OZ-Gedney Type SR Dual Grommet Strain Relief Straight Connector, Size: 3 IN, Conductor Range: 1.875 - 2.25 IN, Malleable Iron Body And Gland Nut, Nylon Gripper, Neoprene Grommet, PVC Or Buna-N Sealing Ring, Steel Locknut, Finish: Zinc Plated B

Category: Straight Malleable Iron Cord Grips

Bushing, Insulated, Threadless, Size: 2 Inch, Material: Malleable Iron/Zinc, For Use with EMT Conduit.

Category: Rigid & IMC Bushings

OZG R-1501-2 TYPE R 1-1/2" CB

Category: Iron Rigid Conduit Cable Supports

Conduit Body, Type: LR, Size: 1-1/2 Inch, Spec 5, Material: Malleable Iron, For Use With Rigid/IMC Conduit

Category: Type LR Iron Conduit Bodies

Switch, Inertia, 7A Series, 1 Normally Open, 1 Normally Closed Contact, NEMA 7/9, Snap Action

Category: Water Pump Pressure Limit Switches

Bushing, Insulating, Threaded, Size: 1-1/2 Inch, Maximum Temperature Rating: 105° C, Material: Plastic

Category: Rigid & IMC Bushings

OZ-Gedney Type CSML Sealing Bushing, Steel Pressure Disc, Finish: PVC Coated, Steel Pipe or Conduit Size: Inside Diameter: 1 IN, Outside Diameter: 1.315 IN, Copper Tubing: Inside Diameter: 1 IN, Outside Diameter: 1-1/8 IN, For 2.5 IN Core Drille

Category: Rigid & IMC Bushings

FS Device Box, 1-Gang, Dead-End, 3/4 Inch Hub, Aluminum, Furnished with Internal Ground Screw

Category: 1-Gang Aluminum FS & FD Device Boxes

OZ-Gedney Type IBC-L-BC Insulated Grounding Bushing With Lug, Size: 3 IN, Malleable Iron Body, Bronze Lug, Steel Clamping Screw And Set Screws, Finish: Zinc Plated Body, Bright Dip Lug, Zinc Plated Clamping Screw And Set Screws, Connection:

Category: Threaded Ground Bushings

Grounding Bushing, Insulated, Size: 2 1/2 Inch, Material: Malleable Iron Or Steel/zinc Plated, Connection Type: Set-screw, Maximum Temperature Rating: 150° C, Features: For Rigid, IMac, Met, Outside Diameter: 3 1/4 Inch, Width: 1 Inch, Grounding Wire Size Minimum: 6 Wag

Category: Threaded Ground Bushings

Flexible Coupling, Size: 1/2 Inch, Length: 15 Inch, Explosion-Proof, Material: Brass/Bronze/Steel, Female End Fittings With Removeable Close Nipples, For Use in Hazardous Locations

Category: Explosion-Proof Type ECGJH Couplings

1 IN HOR/VERT SEALING FTG

Category: Explosion-Proof 40% Fill Female (Vertical / Horizontal) Sealing Fittings

OZ-Gedney Type GUAX Conduit Outlet Box, Number Of Outlet: 4, Malleable Iron Body/Cover, Size: 1-1/2 IN, Cable Entry: (4) 1-1/2 IN Hubs, 70 CU-IN Capacity, No, 5-1/8 IN Cover Opening, Finish: Zinc Electroplated With Aluminum Enamel, 5-5/8 IN Width, 3-3/4 IN Depth, NEMA Rating: NEMA 4, 7CD, 9EFG, Third Party Certification: UL File Number E-30513, Class I, Division 1, 2, Groups C, D, Class I, Zone 1, 2, Groups IIA, IIB, Class II, Division 1, 2, Groups E, F, G, Class III, CSA 020945, Applicable Third Party Standards: UL 886, CSA C22.2 Number 30, NEC Articles 500-503 And 505, Military Specification Mil-F-28675, Federal Specification A-A-50563, For Rigid Conduit And IMC

Category: Explosion-Proof X Conduit Outlet Boxes

OZ-Gedney Type ON Offset Nipple, Malleable Iron, Finish: Zinc Electroplated, Length: 1-5/8 IN Body, Trade Size: 1-1/4 IN, Connection: MNPT, 5/8 IN Each End Thread Length, Third Party Certification: UL File Number E-11853, CSA 009797, Applicable Thi

Category: Zinc Die Cast Offset Nipples

HALO CONDUIT BODY

Category: Type LL Iron Conduit Bodies

OZ-Gedney Type EYAM Vertical/Horizontal Sealing Fitting, Size: 3 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Tapered MNPT X Tapered FNPT, Dimensions: 3-1/8 IN Body Diameter X 9-3/4 IN Overall Length, 3-7/8 IN Turning Radius, 1 LB

Category: Explosion-Proof 40% Fill Female (Vertical / Horizontal) Sealing Fittings