Search results

Emergency LED Driver, 120-277 Volt AC Input, 15-50 Volt DC Output, 7.5 Watts Output Power

Category: LED Driver Emergency Power Supplies

Emergency ballast for Fluorescent and Type A TLED lamps. Input Voltage: 120/277V, 90 Minute Illumination Time up to 1400 lumens, 24 Hr Recharge. For use with the following Compact, Linear, U-Bent & Circline Fluorescent Lamp Types: (1-2) 17 - 40W, 2’ - 4’, T8, T9, T10 or T12 fluorescent lamps, (1) 4-pin, 2G11, 18 - 55W long compacts, (1) 4-pin, G24q/Gx24q, 13 - 42W CFL, (1) T5/T5HO, BiPin or Circline, 14 - 55W, (1) 4-pin, GR10q, 16 - 55W 2D and Compatible with 7 - 16.5W Type A TLED lamps (including LED T8 InstantFit). Meets CEC Title 20 efficiency standards. Includes 2W-ITS (2-wire Illuminated Test Switch).

Category: Emergency Fluorescent Ballasts

Emergency Lighting Kit: 1000+ lumens (with Supplied Module); Provides Emergency Lighting From the Internal Battery Upon Loss of AC Power. For Use With Most Luminaire Types and Independent of the Luminaire Components. Driver: 14.1" H x 1.18" W x 1.0" D (358mm x 30mm x 25mm), Mounting Center 13.78" (350mm). LED Module: 5.0" H x 1.0" W (127mm x 25mm), Mounting Center 2.65" (67.4mm). IP65 Plenum Rated Bi-Color Illuminated Test Switch with 36" leads. 12 NC number: 913702492501

Category: Emergency Lighting Backup Battery Packs

Emergency Lighting Control Device for Generator or Central Inverter Supplied Lighting (Generator Transfer Device): 280 mA, 120/277 Volt AC, 1.6 Watt. For Fluorescent or LED Lighting. 12NC 913710834802. AKA: PET00001M.

Category: LED Driver Emergency Power Supplies

Electronic Emergency Ballast with Backup Battery and Charger, Input Voltage: 120/277V, 90 Minute Illumination Time, 24 Hr Recharge. For use with the following 600-1325 Lumen Compact, Linear & U-Bent Fluorescent Lamp Types: (1) 17-40W, 2-4 ft T5, T8, T10, T12, 4-Pin (2G11) or (1) Philips InstantFit LED T8 4' lamp ***Discontinued, See Sub***

Category: Emergency Fluorescent Ballasts

EMERGENCY LED DRIVER

Category: Screw Base Miniature Incandescent Lamps

BOD B94CGU 120-277 VAC, 50 /60 HZ, ONE-LAMP ILLUMINATION FOR 4-PIN LAMPS,EMERGENCY BALLAST

250VA PURE SINE WAVE OUTPUT INVERTER 250VA (AUTOMATIC OUTPUT SELECTION TITLE 20 SELF TEST & SELF DIAGNOSTIC 0-10V AUTO-DIMMING)

BOD BSL310C-DF EMERGENCY LED DRIVER CLASS 2 10W POWER OUTPUT

HIGH OUTPUT EMERGENCY LED DRIVER

Emergency LED DriverBODINE BSL310LP FIELD INSTALLED EMB

Category: LED Driver Emergency Power Supplies

Emergency LED Driver Listed for Field Installation, Universal Input Voltage 120-277 Volt AC, 20 Watts Output Power

Category: LED Driver Emergency Power Supplies

BOD BSL20 HV Emergency LED Driver, 0.16A-0.10A, 125V-200V

Category: LED Driver Emergency Power Supplies

Electronic Emergency Ballast with Backup Battery and Charger, Input Voltage: 120/277V, 90 Minute Illumination Time, 24 Hr Recharge. Lumens: 300-750

Category: Emergency Fluorescent Ballasts

Emergency LED Driver, 20 Watt Constant Output Power, 1A-0.40A 20V-50V (Class 2)

Category: LED Driver Emergency Power Supplies

Emergency LED Driver Listed for Field Installation, Universal Input Voltage 120-277 Volt AC, 7.5 Watts Output Power

Category: LED Driver Emergency Power Supplies

BOD 42R5BFC1-E3 GEAR MOTOR 1/6 HP 115 VAC 85 RPM

Category: Gearmotors & Synchronous Motors

BOD B50 COLD PAK EXTENDED-TEMPERATURE FLUORESCENT EMERGENCY BALLAST

Category: Fan Remote Control Units

Emergency Ballast- 500-600 Lumens - Damp Location

Bodine Bdl426 Fl Emrgncy Blst: *** THE BDL426 IS OBSOLETE AND A REPLACEMENT ISN’T OFFERED AT THE MOMENT *** For Downlight Fixtures Spec Grade 450-950 Lumens Initial Light Output W/ One Or Two 10w-26w 2-pin Twin Quad Or Triple Twin Tube Comp Fl Lamp

BACK UP INVERTER 600VA SINUSOIDAL (SINE WAVE) OUTPUT

EMERGENCY LED DRIVER CLASS 2 OUTPUT 6W EXTENDED TEMPERATURE RANGE

PARALLEL SHAFT DC GEARMOTOR 30:1

BODBSL310HAZ