Search results

Enclosure, Wall Mount, NEMA 4X, Hinge Cover with Snap Latch, 12 x 10 x 6 Inch, Polycarbonate, Gray

Category: Polycarbonate Hinge Cover Enclosures

3-1/2" Diameter, Ceiling/Fixture Box with Bar Hanger and Speed Clamps, Thermoset Fiberglass, Depth: 2-7/8". Cubic Inches: 21". Fixture Weight: 50 lbs. Adjustable Bracket Length: 16" - 24"

Category: Non-Metallic Adjustable Ceiling / Fixture Boxes

Concrete Floor Box Adapter Kit. Height: 1.625", Width: 4.5".

Category: Recessed Floor Box Service Fittings

Aluminum Enclosure Back Panel For Use With 12" X 10" Enclosures

Category: Enclosure Back Panels

Low Voltage Divider Plate For Use With (P-442, P-643, P-764 Series) Flexbox New Work Products (P-240Ow, P-352Ow) Flexbox Old Work Products And (Sb-2, Sb-3, Sb-4) Sliderbox Adjustable Box Products

Category: Non-Metallic Box Partitions

Floor Box, Round, 4" Diameter, Duplex Device Cover, Dark Bronze Plated Brass

Category: Assembled Recessed Round Boxes

18.0 Cu. In. Single Gang Electrical Box For Use With Nonmeatllic Sheathed Cable- Molded-in Splined Device Holes, Leveling Ribs - New Work Residential Construction 2 Hr Fire Resistive Walls & Ceilings - Pvc - Thermoplastic - Size: D=2 5/8",w=2 5/16", H=3 3/4" - Mount With Stud Face Mount Molded-in Hanger Bracket With 1/2" Offset And Opposite Side Drywall Tabs

Category: Non-Metallic Switch / Outlet Boxes With Brackets

ALL 9350-FANB 22.5 CI 4 IN RN

Category: Non-Metallic Adjustable Ceiling / Fixture Boxes

Standard:rohs, Size:21.00 X 21.00in, Material:aluminum

Category: Enclosure Back Panels

4" Dia. Round Fan Support Box For Use With Nonmetallic Sheathed Cable

Category: Non-Metallic Adjustable Ceiling / Fixture Boxes

4" Octagonal Steel Fan/Fixture Support Box For Use With Nonmetallic Sheathed Cable

Category: Metallic Ceiling Support Boxes

22.5 Cu. In. 4" dia. round fixture support box for use with nonmetallic sheathed cable - Polyurethane flange for single drywall offset, machine tapped fixture holes, rigid hard box construction, no distortion with high temperatures, shatter resistant with low temperatures - New work residential construction 2 HR fire resistive walls and ceilings (50 lbs. fixture support) - air tight - Fiberglass reinforced polyester - thermoset box with galvanized steel adjustable bar hanger - Size: Depth=2 7/16", Dia=4" - Mount with Adjustable bar hanger - 16" to 24" on center joist application - Speed Klamps™ factory installed

Category: Non-Metallic Adjustable Ceiling / Fixture Boxes

Switch/Outlet Box with Stabilizing Bar, 4-Gang, Depth: 3". Cubic Inches: 60.0. Nail-On, Thermoset Fiberglass, Includes: Clamps.

Category: Non-Metallic Switch / Outlet Boxes With Brackets

Switch/Outlet Box with Stabilizing Bar, 3-Gang, Nail-On, Thermoset Fiberglass, Depth: 3 Inch. Cubic Inches: 46.0 Inch. Includes: Clamps.

Category: Non-Metallic Switch / Outlet Boxes With Brackets

Enclosure, Wall Mount, Type 4X, Hinged, Solid Cover, Quick Release, 24 x 24 x 10 Inch, Fiberglass

Category: Fiberglass Hinged Cover Enclosures

8X6X4 ENCLOSURE SNAP LATCH HNG CVR

Category: PVC / Polyester Screw Cover Junction Boxes

4-1/2" Blank Round, Box Cover, Non-Metallic, Color: White.

Category: Non-Metallic Ceiling / Fixture Box Covers

Incandescent Lampholder, Medium Base, One-Piece, Glazed Porcelain Outlet Box Mount Lampholder, Pull Chain, Single Circuit, Top Wired, Color: White.

Category: Pull Chain Incandescent & HID Lampholders

Type:NEMA 4X Type: Nonmetallic Enclosure Special Features: Hinged snap latch type, overlapping and opaque cover design with FIP formed-in-place polyurethane gasket system Application:Industrial control panels intended for general industrial use, operating from a voltage of 600 volts or less Material:ULTRAGUARD - Fiberglass reinforced polyester - thermoset Size:A=10.14", B=8.26", C=4.13", usable depth=3.68" Color:RAL 7035 - Gray Mounting:Stainless steel feet fastened to back side brass inserts

Category: Fiberglass Hinged Cover Enclosures

3-1/2" Diameter, Nail-On, Ceiling/Fixture Box, Thermoset Fiberglass, Depth: 2-7/8". Cubic Inches: 20.5". Fixture Weight: 50 lbs. Includes: Nails, Ground Strap.

Category: Round Non-Metallic New Work Ceiling / Fixture Boxes

4" Square Blank Cover, Non-Metallic, Color: White, For Use With Series 9339/9342/9343 Only

Category: Non-Metallic Box Covers

SLIDERBOX® Single-Gang Fiberglass Outlet Box, External Mounting Plate For Use In Wood Or Steel Non-Load-Bearing Studs 25 Gauge Or Lighter, ½" Knockout, Depth Adjustable From 0"-2", 3-9/16" x 3-3/8" x 3.83"

Category: Non-Metallic Adjustable Switch / Outlet Boxes

Rectangular Floor Box Assembly With A Nickel Plated Brass Duplex Device Cover

Category: Assembled Recessed Gang Boxes

Back Panel For Enclosure, Polyline Series, Size: 12 x 10 Inch, Material: Carbon Steel, Color: White

Category: Enclosure Back Panels