"appleton"

Pulling Elbow, Threaded, Female/Female, 3/4 Inch, Die Cast Zinc, Rigid Conduit / IMC, With Gasket, 90°, UL 514-B, CSA C22.2, RAINTIGHT

Category: Zinc Die Cast Rigid Elbows

3" to 2-1/2", Reducing Bushing, Threaded, Bushing Material: Malleable Iron.

Category: Iron Alloy Reducing Bushings

Liquidtight Strain Relief Cord Connector, Straight, 1/2 Inch, Cable Range 0.187 - 0.312 Inch, Steel, For Use in Wet or Dry Locations

Category: Straight Steel Cord Grips

Clamp Back, 3/4 inch, Material: Malleable Iron.

Category: Clamp Backs - Iron

4 Inch Square Box, Welded, Metallic, Vertical Bracket, 2-1/8 Inch Deep, Side Knockouts: (6) 1/2 Inch with (3) Eccentric Knockouts, Bottom Knockouts: (2) 1/2 Inch (2) Eccentric Knockouts, Cubic Inches: 30.3

Category: 4" Square Metallic Boxes With Brackets

Union, 3/4 Inch, Female/Female, Malleable Iron, Conduit to Conduit, Explosion-Proof/Dust-Ignitionproof.

Category: Explosion-Proof Type UNF Unions

EMT Connector, Set Screw, 4 inch, Material: Steel, For Use with EMT Conduit, UL 514-B, CSA C22.2, APPLICABLE STANDARD FEDERAL SPECIFICATION WF-408E, NEMA

Category: Steel EMT Set Screw Connectors

Service Entrance Wire Holder Adjustable With Porcelain Insulator For 600 Volt Services Or Less

Category: Wireholders - Clamp-On

EMT Compression Coupling, 1-1/2 Inch, Concrete Tight, Steel, For Use with EMT Conduit, UL 514B

Category: Steel Concrete Tight EMT Compression Couplings

GR Type Conduit Outlet Box, Explosion-Proof, Dust-Ignitionproof, Malleable Iron, Unilet, GRT Hub Type. Includes: Internal Ground Screw and O-Ring, Internally Threaded Surface Cover with 3.88" Opening, 18 Cubic Inches and (3) 3/4" Threaded Hubs. For use with Threaded Metal Conduit.

Category: Explosion-Proof T Conduit Outlet Boxes

Chase Nipple, 3 Inch, Zinc Die Cast, For Use With a Conduit Coupling to Connect Conduit to a Box, or With a Locknut to Connect Two Boxes

Category: Zinc Die Cast Chase Nipples

EMT Compression Connector, 1-1/2 Inch Diameter, Concrete Tight, Steel/Zinc Plated, For Use with EMT Conduit

Category: Steel Concrete Tight EMT Compression Connectors

Conduit Body, Type C, Form 7, Size 1 Inch, Malleable Iron

Category: Type C Iron Conduit Bodies

Conduit Body Cover, Type: Wedge, FM7, Size: 3/4", Material: Grayloy Iron.

Category: Iron Conduit Body Covers

Conduit Body, Type LL, 1 Inch Hub Diameter, Form 7, Grayloy Iron, For Use With Rigid and IMC Conduit

Category: Type LL Iron Conduit Bodies

Duct Seal, Gray, 5 Pound

Category: Duct Seal

1-1/4" Liquid Tight D/c Conn

Category: Straight Die-Cast Liquidtight Flex Connectors

Liquidtight Connector, 90 Degree, Diameter 3/4 Inch, Malleable Iron With Zinc Finish, For Use With Liquidtight Flexible Metal Conduit

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

Non-Hazardous Location Drain, 3/4 Inch, Raintight, Steel, Suitable for Class I Division II

Category: Explosion-Proof Universal Drains / Breathers

Conduit Body, Type: LB, FM85, Size: 1", Material: Copper Free Aluminum.

Category: Type LB Aluminum Conduit Bodies

Rigid Conduit Strap, 1-Hole, 1-1/4 Inch, Steel With Zinc Finish, For Use With Rigid/IMC Conduit

Category: Steel 1-Hole Conduit Straps

Liquidtight Connector, 1 Inch, Straight, Zinc Electroplated Steel

Category: Straight Steel Liquidtight Flex Connectors

EMT Compression Connector, 1/2 Inch Diameter, Insulated Throat, Concrete Tight, Steel/Zinc Plated, For Use with EMT Conduit

Category: Steel Concrete Tight EMT Compression Connectors

Box Connector, 1-1/4 Inch, SEU Type , Maximum Opening: .57 to .85 Inch, Zinc Die Cast, For Use With Oval SEU Cable

Category: Zinc Die Cast NM Cable Connectors