"80401-GY"

Eaton Arrow Hart heavy duty industrial specification grade duplex receptacle, Auto-grounding,screw-catch, Half control, #14-10 AWG, 20A, Flush, 125V, Gray, Brass, High-impact nylon face,PVC base, 5-20R, 2-pole, 3-wire, Screw,

Six inch LED Retrofit Downlight trim, 700 Lumens, 90 CRI, 3000K, wet location listed. Comparable to a 65W BR30 lamp. Metallic Gray finish.

Plate, Decorator Frame, Decorator Frame, 1) VGA, Blank, Recessed, Gray

HPW HI5E07AE P-CORD, HI-IMPACT,5E,GY,RJ45-IE,7'

Hubbell Premise Wiring Products, iStation Modules, 15-Pin, XLR, 3.5 MMStereo Jack, Unloaded, 2-Unit, Gray

Hubbell Premise Wiring Products, Housing, Surface Mount, 2-Port, Gray

CWD 8200GYS RECP HG TVSS 15A125V 2P3W LED & ALARM GY

CWD 47-4-BOX *CORD RANGE 50A125/250V 3P3W 4FT GY 12PACK

Plate Wp W/pl For Tap Action Sw Neopr Gy *** Discontinued ***

Arh Ah30ms1b-m2 30a 600v Nonfused 4x Disc Sw

Metal Raceway, HBL2000/3000 Series, Reducing Fitting, Gray

Metal Raceway, Internal Corner Coupling, HBL3000 Series, Gray

HUB CS1203GY 3 WAY TOG, CONST GRD, 15A 120/277V, GY

Hubbell Wiring Device Kellems, Metal Raceway, 19.5" Cover, HBL3000Series, Gray

HUB 40472BBBBGY RACEWAY PLT, 4G DUPLEX, 4000 SER, GY

HUB ATP2000GY OCC/VAC SENSOR,AT PIR,120/277V,GY

Hubbell Wiring Device Kellems, Wallplates and Box Covers, Wallplate,Nylon, 2-Gang, 2) Blank, Strap Mount, Gray

Prewired 20A duplex receptacle can be wired as standard duplex or isolated ground. Flanges available painted in gray (GY), black (BK), ivory (VY). Flanges also available in plated brushed brass (BS) and brushed aluminum (AL). Slide covers match the painted flange colors, gray, black, ivory. Aluminum and brass flanges shipped with black slide cover. Brass flange also available with nonmetallic brass colored slide holder (AB). Aluminum flange also available with nonmetallic aluminum color slide holder (AA). Includes Wiremold Open System unloaded inserts. NOTE: Includes two Cat 6 TechChoice discrete keystone connectors, two Ortronics TracJack adapters, and two Wiremold Open System adapters. RC7 Series Poke-Thru Devices require a 3 1/16 (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8 minimum. RC7 Assembled Unit-Ivory Finish Flange Ivory Slide Holder, 20A Duplex Standard or IG and Cat 6 Connectors

Hubbell Wiring Device Kellems, Wallplates and Box Covers, Wallplate,Nylon, 6-Gang, 6) Decorator, Gray

HUB CM2ABGHBL BEZEL,WIREMOLD,P&S ACTIVATE 2A MINI,GY

Hubbell Wiring Device Kellems, Wallplates, Nylon, 3-Gang, 1) Toggle, 2)Decorator, Gray

Hubbell Wiring Device Kellems, Kellems Wire Managent, Cord Connector,Non-Metallic, .25-.37", 1/2", Gray

Wallplates, Nylon, 3-Gang, 1) Toggle, 2) Duplex, Gray

8IN CORE-PREWIRED-For tile, wood and laminate concrete floor coverings. For use in 8" (203mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover assembly is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. Includes one (1) 8TS Tile Shim. INCLUDED: For Side Compartments: Two (2) proprietary 20A Duplex Receptacles installed. For Center Compartment: No device plates are provided. For Bottom Feed Compartment: One (1) 5BLH 1/2-Gang Blank Housing (Tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA.) Three (3) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit), One (1) 8DIV 8" Divider, One (1) 8TS Tile Shim. NOTE: UL Fire Classified for up to 2-hour rated floors. Receptacles can be wired as a standard or isolated ground device. Black