"wiremold"

BRASS COMM COVER PLATE

PLGMD W/SURGE SGL

WMD APUSB3TM4 USB Outlet Module, 2 USB Charging Ports, 2.1 Amps of Power

6IN CORE-PREWIRED-FLUSH AV BRASS

WMD 4ATCBS 4IN UNWIRED PT ASS

4IN COVER ASSEMBLY SURFACE BS

WIR V2186 STL ADJUSTABLE OFFSET CONN 2100 IV

FLUSH FITTING 20 AMP DUPLEX GY

8IN CORE-PREWIRED-For tile, wood and laminate concrete floor coverings. For use in 8" (203mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover assembly is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. Includes one (1) 8TS Tile Shim. INCLUDED: For Side Compartments: Two (2) proprietary 20A Duplex Receptacles installed. For Center Compartment: No device plates are provided. For Bottom Feed Compartment: One (1) 5BLH 1/2-Gang Blank Housing (Tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA.) Three (3) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit), One (1) 8DIV 8" Divider, One (1) 8TS Tile Shim. NOTE: UL Fire Classified for up to 2-hour rated floors. Receptacles can be wired as a standard or isolated ground device. Black

WIR G4047-2AAJJ 4 GANG GRAY PLATE W/TWO 1.41" AND TWO 1.59" SINGLE ROUND RECEPTACLES

In-line transition from DS4000 Series Raceway to 4000 Series Raceway. Designer Ivory

WIR V4046A STL COMB RCPT & TEL OUTLET CVR IV

BASE FOR 30TC4V

WIR CM2-U2TJ-GY CM2 MODULE FOR

WIR TS2345AX1L2GYRT TABLESOURCE MODULE W/ORT

SRV FTG (2) DPLX PLT OPNGS

WMD AD3-ZR-W ADORNE EXTRA-CAP

WMD KA305-AAP DEQUORUM WORKSU

FEED TAP 277V

Pass and Seymour 20A duplex receptacle with 6" (152mm) lead wires pre-installed on a bracket into DS4000 Series Raceway in a downward facing, protected position. Designer Ivory

WIR 5000TOA 5000 TRIM COVER OAK WOOD

WMD FS2RWP8 2IN RETROFIT KIT

12IN W X3-1/4DX2FT TRENCHDUCT BODY & COVER ASSEMBLY

WMD XDU50A