"wiremold"

Steel, Prewired Plugmold, Tamper-Resistant, Length: 6 ft. Color: White. Outlets (6") O/C: Total Outlets: (11) 15A, 125V: Single Circuit, (1) 2-Port 2.4 USB, 5V DC, Single Outlets.

Category: Single Circuit Tamper Proof Plugmold

Non-Metallic, Entrance End Fitting, 800 Series. Size: 4-1/4" Length, 1-7/16" Width, 1-1/2" Height. PVC, White.

Category: 2-Piece Non-Metallic Raceway End Fittings

Steel, Prewired Plugmold, Tamper-Resistant, Length: 5 ft. Color: Black. Outlets (6") O/C: Total Outlets: (9) 15A, 125V: Single Circuit, (1) 2-Port 2.4 USB, 5V DC, Single Outlets.

Category: Single Circuit Tamper Proof Plugmold

Prewired Poke-Thru Device, 4 Inch Diameter, Dual Service, Includes: (1) 20 Amp Duplex Receptacle, (1) 42A Device Plate, (1) 4MAAP Device Plate, Aluminum/Gray

Category: Assembled Poke-Through Units

Steel, Base and Cover, 2600 Series. Size: 10' Length, 2-7/32" Width, 23/32" Height. Includes: 9/32" Mounting on 8" Centers. .050" Galvanized Steel,.

Category: Metallic Overfloor Raceway

Aluminum, Cover, AL Series, Size: 5' Length, 0.060 Aluminum

Category: Small 2-Piece Metallic Raceway Covers

Steel, Prewired Plugmold, Tamper-Resistant, 3' Long, White, (6) Outlets, GFISteel, Prewired Plugmold, Tamper-Resistant, Length: 3 ft. Color: White. Outlets (6") O/C: Total Outlets: (6) GFCI, 15A, 125V: Single Circuit, Single Outlets. Built-in GFI Breaker.

Category: Single Circuit Tamper Proof Plugmold

Floor Box Divider Plate with Graduated Cubic Inch Markings. PVC. Size: 5-1/4". Box Quantity: 1.

Category: Recessed Floor Box Service Dividers

For covering rectangular decorator style devices. White

Category: 1-Gang Raceway Box Covers & Faceplates

Installs rectangular devices including surge receptacles, GFCI, and other rectangular faced single-gang wiring devices. Can also be used with 106 communication frames.

Category: Large 2-Piece Metallic Raceway Cover Plates

Steel, Blank End Fitting, 6000 Series. SIze: 1-1/2". Ivory.

Category: Large 2-Piece Metallic Raceway End Fittings

WMD 44DEC 4IN EVO DECORATOR D

Category: Poke-Through Cover Assemblies

Raceway Base, Extruded aluminum, Satin Anodized Finish, 2-7/8 Wide x 1-7/8 Deep x 10' Long

Category: Plugmold Bases

Non-Metallic, Twin Snap Cover, 5400 Series. Size: 8' Length, 2-9/16" Compartment Width. PVC, Ivory.

Category: 2-Piece Non-Metallic Raceway Covers

3-Gang, Cover Plate Flange, Brass. WxL: 13-1/3" x 6". Accepts MAB6TJ, MAB3S2, and CM Series Open System Adapters. For use in Carpet and Tile Applications.

Category: Square / Rectangle Recessed Box Flanges

Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly. Lid area is flush with the finished floor, no cutouts provided. Finish - Brass

Category: Square / Rectangle Recessed Box Covers

Duplex Power Plate with Flip Lids, Color: Black

Category: Round Recessed Box Covers

W-mold S4010b0 Blank End

Category: Large 2-Piece Metallic Raceway End Fittings

Single-gang device plate that will accept up to four (4) Legrand AVIP or Extron Electronics MAAP style plates. Fits in any one (1) of the three (3) gangs in the center compartment. Devices supplied by others.

Category: Poke-Through Mounting Plates

6IN PREWIRED FLUSH STYLE ASSEM AA

Category: Assembled Poke-Through Units

Non-Metallic, 2-Gang, Device Box, 2300 Series. Size: 4-3/4" Length, 4-7/8" Width, 1-3/8" Depth. PVC, White.

Category: 2-Gang Raceway Device Boxes

Non-Metallic, 90° Flat Elbow, 800 Series. Size: 2" Length. PVC, White.

Category: 2-Piece Non-Metallic Raceway Elbows

Aluminum, Base, AL Series. Size: 5' Length. .060 Aluminum.

Category: Small 2-Piece Metallic Raceway Bases

Non-Metallic, Internal Elbow, PN10 Series, Size: 2-1/8" Length, PVC, White

Category: 1-Piece Non-Metallic Raceway Elbows