"wiremold"

Radiused Divided 90° Internal Elbow, 2400 Series, for Fiber Optics, Size: 4", Steel, Includes (2) Couplings, Ivory

Category: Small 2-Piece Metallic Raceway Elbows

Used for touching up small areas. Contains 0.3 oz. of paint. Ivory

Category: Touch Up Paint

Non-Metallic, 90° Flat Elbow, 800 Series. Size: 2" Length. PVC, Ivory.

Category: 2-Piece Non-Metallic Raceway Elbows

Non-Metallic, Internal Elbow, PN03 Series, Size: 2-1/8" Length, PVC, White

Category: 1-Piece Non-Metallic Raceway Elbows

Non-Metallic, Wire Clip, 400 Series. Size: 3/4" Length. PVC, Ivory.

Category: 2-Piece Non-Metallic Raceway Clips & Couplings

Steel, 2-Gang, Device Box, 2000 Series. Size: 1-3/4" Depth. Ivory.

Category: 2-Gang Raceway Device Boxes

Steel, Male Elbow Box Connector, 500, 700 Series. Size: 1/2". Ivory.

Category: Metallic Raceway Connectors & Adapters

WMD 25DTC-415BK TPP BLANK STE

Category: Steel Power Poles

For power or communication devices in a single compartment. For use with 5507 Series Faceplates, Ortronics TracJack and Series II Modules, Pass and Seymour Activate Series Inserts, and Wiremold Open System Communication Modules. NOTE: CM-EPLA End Plates are required when using Wiremold communication modules and Pass and Seymour Activate inserts. S2-EPL End Plates are required when using Orthonics Series II Inserts. To mount TracJack inserts, use 5507-4TJ or 5507-6TJ Faceplates. White

Category: 1-Gang Raceway Device Brackets & Plates

Steel, 90° Flat Elbow, 3000 Series. Size: 4" Inside, 6" Outside. Ivory.

Category: Small 2-Piece Metallic Raceway Elbows

For mounting power and communication devices in-line with 5400 Series Raceway. Utilizes 5507 Series Faceplates, Wiremold Open System communication modules, Ortronics TracJack and Series II inserts, and Pass and Seymour Activate Series Inserts. For faceplate options, see 5507 Series Faceplates. NOTE: CM-EPLA End Plates are required when using Wiremold communication modules and Pass and Seymour Activate inserts. S2-EPL End Plates are required when using Ortronics Series II Inserts. To mount TracJack inserts, use 5507-4TJ or 5507-6TJ Faceplates. White

Category: 1-Gang Raceway Device Brackets & Plates

3000 Rigid Inside Coupling (Galvanized) Fitting G3001A

Category: Small 2-Piece Metallic Raceway Clips, Connectors, & Couplings

WIREMOLD APMT12TM2, 12" Modular Track, One Outlet Module, One Blank Module.

EV CHARGER 48A

POWER STRIP WITH 6FT CORD & SB CORD CAP

Category: General Duty Power Strips

WMD 4ATCP2CRSB 4IN PREWIRED S

CORD DROP WITH STARTER BOX AND COVER L14-20 INLET 40FT 12/4 SJTOW BLACK DROP

Category: Duplex Portable Outlet Boxes

OFR Series In-Wall Entrance End Fitting

Category: 1-Piece Non-Metallic Raceway End Fittings

SURFACE WALL DUCT COVER

Category: 2-Piece Non-Metallic Raceway

Combination Carpet and Tile Flange, 3-Gang, Powder-Coated Aluminum, Nickel

Category: Square / Rectangle Recessed Box Flanges

Brushed aluminum duplex cover plate, 3.290" x 4.310" (83.6mm x 109.5mm). Flip lids can also be used with 106 type frames for communications. NOTE: Brass covers and flanges are not interchangeable with aluminum or nonmetallic covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges. Made in USA. Black

Category: Square / Rectangle Recessed Box Covers

Two Gang Device Box. Cover has twistouts for 2000, 500 and 700 Series Raceways. Base has 1/2" trade size KO and rectangular KO for extension to wall box. Base has #10 threaded hole for ground connection. Finish - Gray

Category: 2-Gang Raceway Switch & Receptacle Boxes

4 Inch Pre-Pour Poke-Thru Sleeve, Nonmetallic Sleeve Attaches to Structural Steel or Plywood Decking, Unit Includes (3) Attachment legs, (2) End Caps and (3) Thumb Screws

Category: Assembled Poke-Through Units

1-GANG CARPET & TILE FLANGE BZ

Category: Square / Rectangle Recessed Box Flanges