"rain pants"

Use Floor stand kit to mount Wall-Mount or Free-Stand Enclosures to the floor or elevate the enclosures. This Floor Stand Kit, AFK2416SS6 item measures 24.00x16.06 inch with a material of Stainless Steel 316 finish Brushed.

Category: Enclosure Floor Stands

6-Lamp Wiring Harness for LED Tubes; Includes (6) Pre-Wired Standard, Non-Shunted Sockets with Power Quick Disconnect

Category: Replacement Fixture Parts

Square D,CONTACTOR+STARTER CONTACT KIT L+LL+LX,20 A,Contact Kit,Series A&B 8903LL, L and Series A LX contactors,direct,replacement parts

Category: Starter & Contactors - Replacement Contact Kits

Wiring plan lectern, for TS, SE, CM, TP, PC, material: Utility lectern: Polypropylene, Mounting bracket: Die-cast zinc, color: Similar to RAL 7035, supply includes: Wiring plan lectern (width 210 mm), Assembly parts, description: Holds wiring plans during fault finding and maintenance work. The wiring plan lecterns can be bayed according to the door width. For mounting on the tubular door frame.

Cable clamp rails, Mounting angle for TS, SE, PC, TP universal console, TS base/plinths, Flex-Block, material: Steel, surface: Zinc-plated, supply includes: Assembly parts, description: For TS, ES, PC, TP universal console, base/plinth, for strain relief with cable entry. Packaging Unit: 2 pc(s).

Category: Rack Mounting Kits & Hardware

LED system light, 24 V DC version, material: Light body: Extruded aluminium, Light cover: Polycarbonate (halogen-free), Light ends: PC-ABS, color: Similar to RAL 7035, supply includes: LED system light with clip and screw mounting kits, Light, Light cover, Assembly parts, description: Supply voltage: 24 V DC

Category: Enclosure LED Light Packages

TS punched sections without mounting flanges, 45 x 88 mm, For the inner mounting level, material: Sheet steel, surface: Zinc-plated, supply includes: Assembly parts, description: Heavy top-mounted equipment mounted directly on the internal surfaces (e.g. roof) is supported. Mounted on the side or rear, the enclosure can then be screw-fastened securely to the machine. Packaging Unit: 2 pc(s).

TS punched sections without mounting flanges, 45 x 88 mm, For the inner mounting level, material: Sheet steel, surface: Zinc-plated, supply includes: Assembly parts, description: Heavy top-mounted equipment mounted directly on the internal surfaces (e.g. roof) is supported. Mounted on the side or rear, the enclosure can then be screw-fastened securely to the machine. Packaging Unit: 2 pc(s).

Power Structure, Replacement, PowerFlex, Active Front End, 460 Amp, 400/480 Volt AC, Frame 10

Category: Variable Frequency Drive Replacement Parts

Contact Block, Pendant, Control Station, Harmony, 3 Pushbuttons, 5 Amp, 600 Volt AC

Category: Control Station Replacement Parts

Mounting bars, for TS, SE, CM, TP, For the outer mounting level, material: Sheet steel, surface: Zinc-plated, supply includes: Assembly parts, description: For attaching cable ducts, cable conduit holders, contact hazard protections, door installations, cable clamping and attachment, etc. Packaging Unit: 20 pc(s).

Category: Rack Mounting Kits & Hardware

Broan; Blower; Voltage Rating: 120 V; Amperage Rating: 0.5 Amp; Motor Type: Plug-in, Permanently Lubricated; Housing Material: Steel; Finish: Galvanized Housing; Cfm: 80 Cfm; Sones: 2.5 Sones; Duct: 4 In Round. Has Been Replaced By Broan A80HDF

Category: Fan Housing / Finish Packs

CWHSMAG Surface Mounting Frame (Accessory). Order separately. 12-1/2”H x 10-3/8”W x 4”D, Heavy gauge steel designed to mount around the backbox for a finished surface installation. Slot knock outs provided for power supply conduit. Bronze Finish

Category: Heater Adapter Plates

Air/water heat exchangers, Wall-mounted, Copper/brass (Cu/CuZn), color: RAL 7035, supply includes: Fully wired ready for connection (plug-in terminal strip), Drilling template, Sealing and assembly parts, description: Output classes 375 to 5,000 W. For use in tough environments. Convenient mounting options and flexible water connection options. Partial or full internal mounting possible.

Category: Enclosure Heat Exchangers

Base/plinth trim panels, side, 100 mm, for base/plinth components front and rear, material: Sheet steel, surface: Spray-finished, color: RAL 7022, supply includes: 2 base/plinth trim panels, Assembly parts, description: For mounting between the base/plinth components. At 200 mm height, two 100 mm base/plinth trims may be used. Base/plinth trims may be installed rotated through 90 deg in order to stabilise bayed base/plinth components. Packaging Unit: 2 pc(s).

Category: Enclosure Mounting Bracket Kits

Provides maximum releases. Perfect for difficult to remove parts. Colorless, odorless, non-staining and non-corrosive. Heavy duty silicone content of 5%. ***DISCONTINUED***

Category: Multi-Purpose Lubricant

OZ-Gedney Type CT Service Entrance Head, 1-1/2 IN Hub, Length: 3-25/32 IN, 5-3/8 IN Width, 4-3/4 IN Height, Malleable Iron, Brass Screws In Hood, Phenolic Insulator, Finish: Hot Dip Or Mechanically Galvanized, Connection: Threaded, 3 X 3/4 IN, 2 X 19/32 IN, 1 X 7/16 IN Insulator Holes, Third Party Certification: UL File Number E-11857, Applicable Third Party Standards: UL 514B, For Rigid Conduit, IMC And EMT Conduit

Category: Service Entrance Caps - Metallic

Fibre-optic shunting rings, material: Dual compound plastic, color: Exterior: RAL 7035, Interior: RAL 9005, supply includes: 2 shunting rings, 2 rubber rings, Baying kit, Assembly parts, description: The inner body is grooved, for the insertion of shunting or jumper cables into these, a rubber ring holds different fibre-optic cables with diameters of up to 4.5 mm. Packaging Unit: 2 pc(s).

Door Frame, Type 1, Flush Mount, Size/Dims: 20" x 14", Material Finish: Steel/Gray. For use with 18" x 12" Continuous Hinge Boxes. Includes: Black Composite Sliding Latch.

Category: Enclosure Surface Covers & Doors

Features: Aluminum mesh filter traps grease and protects motor, Dishwasher safe, For L400/500 Series.

Category: Range Hood Replacement Parts

CH JM5S806 VMV CHAMP COPVER STANCHION 25 DEGREE ANGLE

Category: Hazardous Fixture Replacement Parts

Crimps Panduit #22 – 10 AWG insulated and terminals, disconnects and splices. Includes tool, two battery cartridges (CT-2500BC), battery charger (CT-2500CHR) and molded carrying case (CT-2500CASE). These parts are also compatible with the CT

Category: Cordless Crimpers

Divider panel for module plates, for TS, material: Sheet steel, 2.0 mm, surface: Zinc-plated, supply includes: Assembly parts and multi-tooth screws M5 x 12 mm for mounting the module plates., description: With cut-outs for the installation of module plates for connectors or for cable entry, and also for the entry of busbar systems and other installed equipment.

System support rails, material: Sheet steel, surface: Zinc-plated, supply includes: 2 system support rails (45 x 25 mm), 4 T-head screws M12 x 60 mm, Assembly parts, description: For heavy installed equipment such as transformers. T-head screw and slot in the support rail accommodate all mounting dimensions. Packaging Unit: 2 pc(s).

Category: Rack Mounting Kits & Hardware