"ARW450A4-DO"

45 Amp, 4-Pole, 600V Rated, 100-250 VAC/VDC Coil. AF-Line Series, AF26 Frame, IEC Contactor with (4) N.O. Contacts. *** Does not include Standard Aux Contacts, 4 Pole Contactor Only ***

Category: IEC Contactors - 4-Pole

Electronic Sign Ballast, Fluorescent, Input Voltage: IntelliVolt operation; 120V to 277V, Instant Start, SignPro Series. For use with any 1 to 4 lamp T12HO lamps up to 10 feet long, 10 feet to 40 feet total length. For use with any 1 to 4 lamp T8HO lamps up to 8 feet long, 8 feet to 32 feet total length. For use with T12HO / T8HO lamps or any combination of lamps in circuit as long as total length per circuit does not exceed 9 feet for T12HO and 7 feet for T8HO. *** NOTE: Fixture/Lamp Holders may need to be rewired! See cut sheet wiring diagram ***

Category: Electronic Fluorescent Sign Ballasts

Meter Pack, Ring Style Meter Socket Covers, 1-phase, 2 Meter Sockets, 200 Amp Socket Rating, 400 Amp Bus Rating, Copper Bus, Underground Incoming Feed, Does Not Include 5th Jaw, Requiresbolt-on Type Main Tenant Circuit Breaker, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Group Metering Meter Packs

Meter Pack, Ring Style Meter Socket Covers, 1-phase, 3 Meter Sockets, 200 Amp Socket Rating, 600 Amp Bus Rating, Copper Bus, Underground Incoming Feed, Does Not Include 5th Jaw, Requires Bolt-on Type Main Tenant Circuit Breaker, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Group Metering Meter Packs

Meter Pack, Ring Style Meter Socket Covers, 1-phase, 4 Meter Sockets, 125 Amp Socket Rating, 400 Amp Bus Rating, Copper Bus, Underground Incoming Feed, Does Not Include 5th Jaw, Requiresplug-on Type Main Tenant Circuit Breaker, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Group Metering Meter Packs

This Net-Direct™ Air Inlet Duct provides cold airflow directly into Cisco 4948, 4928, and 4924 switch intakes from below. Not only does it require no energy to operate, but it also reduces fan power consumption by up to 250W, improving energy efficiency a

Category: Rack Shelves

Historian SE - 20,000 tags with Historian SE - 20,000 tags 8x5 support, ESD. Does NOT include VantagePoint Sever.

Category: PLC Technical Support

For use with ECD00-D0W. Fuse and fuseholder accessory kit includes two fuses, a UL listed holder, and fuse puller. Required to meet UL1008 requirements for Short Circuit Current Rating (5000A). The fuse is installed on the line side of the dimming control. Under this method, a single ECD00-FUS may feed multiple ECD00-D0Ws, provided that their total load does not exceed 16A, and they share the same normal and emergency breakers. Fuses are 30 Amps

Category: Modular Fuse Holders

IC695ACC002 REPLACEMENT PLASTIC CASES FOR RX3I CPU AND AC PS, QUANTITY 4. DOES NOT INCLUDE FRONT COVER.

Category: PLC Repair Parts

22.5 mm, Compact Range Pilot Light, Red, 24V AC/DC, LED Pilot Light. Lamp Not Replaceable. NEMA Rating: 4X, 13. Does Not Require Contact Blocks or Holders.

Category: Assembled Pilot Lights

Cable Puller, Pull-It 6000, Pull Force: 6,000 lbs, Light Weight & Doesn't Require Bolts Into Floor, Includes: (5) Conduit Adapters (2" to 4") & Puller Cart with Tool Bag, Does Not Include Super Hawg, Requires: Milwaukee Super Hawg Two Speed Drill

Category: Cable Pullers

Non-Fused Disconnect Switch. 600 Amp. Base and DIN Rail Mounted. 3-Pole AC. UL 98. For use with 12mm Shafts and Handles. Does not include Lug Kit.

Category: Base & DIN Rail Mount Non-Fusible Disconnect Switches

Variety for all applications Wide variety of frames to cover different applications;Interchangable trims to cover desired lighting effect;Designed for ease of installation For all Non-IC applications in both residential and commercial construction. Accepts all 1000's series trims. Rugged mounting system with 13" heavy-guage mounting bars that extend to 27". Integral cable clamps. Available in three well-scaled sizes: 3 3/4", 5", 6 3/4";Righting mounting frame does not flex, keeps reflector trim flush to the ceiling;Rotatable mounting bars enables frame to mounted in tight conditions;Allignment markings make it easy to keep a long run of downlights straight Residential;Hospitality

Category: 5" IC / Non-IC Housings

3" Two-Piece Dark Flat Top Standoff Contractor Pack, 24 = 1 box. Diameter: 1-5/8". Includes: Stainless Steel Hardware. ***Does not include Lag Bolts for Attachment***

Category: Solar Racking Attachments

The R100X125V1T Thermal Transfer Turn-Tell Label has an innovative design that allows it to rotate to any angle for improved visibility, aesthetics, and repositioning on wires/cables. It can easily be installed on existing terminated wires/assemblies and does not require disconnecting wires/cables. Use with Easy-Mark Plus Labeling Software and TDP printers. 1.0" x 1.25" (25.4 mm x 31.8 mm). Color White. 2500 labels.

Category: Repositionable Labels

Main or subfeed breaker mounting kit for original P1 interiors. Suitable for circuit breaker type (FD6 - FXD6 - HFD6 - HFXD6) in 3-Phase systems. Rated (250A max). Includes all mounting hardware. Does not include breaker. Not suitable for use with Revised P1 panels produced after December 2014.

Category: Circuit Breaker Mounting Kits

15 Amp, 125 Volt, Decora Style GFCI, Single-Pole / 5-15R AC Combination Switch, Tamper Resistant, Back & Side Wired Self test. *** Does not include wall plate*** - Light Almond

Category: Combination GFCI Devices

Floor Warming Mat, 208/240 Volt, 450/600 Watt, Dimensions: 20 inch x 30.5 foot, 50 ft². ***Used as an extension, does not include Thermostat*** - DISC PER MFR

Category: 240V Floor Warming Mats

Cable Puller, Pull-It 3000, Pull Force: 3,000 lbs, No Anchoring & Attaches to Truck Receiver Hitch, Includes: (8) Conduit Adapters (1'-4"). Does not include Super Hawg. Requires: Milwaukee Super Hawg Two Speed Drill (1680-20)

Category: Cable Pullers

Historian SE, 10,000 Tags, Perpetual, Historian SE, 24x7 Support, ESD. Does NOT include VantagePoint Sever.

Category: PLC Communications Software

22.5 mm, Compact Range Pilot Light, White, 24V AC/DC, LED Pilot Light. Lamp Not Replaceable. NEMA Rating: 4X, 13. Does Not Require Contact Blocks or Holders.

Category: Assembled Pilot Lights

Main or subfeed breaker mounting kit for original P1 interiors. Suitable for circuit breaker type (BQD) in 3-Phase systems. Rated (100A max). Includes all mounting hardware. Does not include breaker. Not suitable for use with Revised P1 panels produced after December 2014.

Category: Panelboard Main Breaker Kits

45 Amp, 3-Pole, 600V Rated, 48-130 VAC/VDC Coil. AF-Line Series, AF26 Frame, IEC Contactor. *** Does not include Standard Aux Contacts, 3 Pole Contactor Only ***

Category: IEC Contactors - 38-65 Amp

Variety for all applications Wide variety of frames to cover different applications;Interchangable trims to cover desired lighting effect;Designed for ease of installation For all Non-IC applications in both residential and commercial construction. Accepts all 1000's series trims. Rugged mounting system with 13" heavy-guage mounting bars that extend to 27". Integral cable clamps. Available in three well-scaled sizes: 3 3/4", 5", 6 3/4";Righting mounting frame does not flex, keeps reflector trim flush to the ceiling;Rotatable mounting bars enables frame to mounted in tight conditions;Allignment markings make it easy to keep a long run of downlights straight Residential;Hospitality

Category: 5" IC Rated Recessed Lighting Housings