"abb contactor"

Conduit Blanks, Snap-In Type, 1-1/2", Steel With Zinc Finish, For Use With Rigid/IMC Conduit

Category: Steel Knockout Seals

FS Device Box, Shallow, 1-Gang, 1/2 Inch Hub, Dead-End, Die Cast Aluminum, Raintight When Used With Appropriate Cover

Category: 1-Gang Aluminum FS & FD Device Boxes

Heater Element, for CR104H,Y, 5.43 Full Load Amps

Category: Heater Elements - GE CR123 Series

Bushed Conduit Nipple, 1/2 IN, Use W/ IMC/Rigid Conduit, Steel, Electro-Plated Zinc/Chromate

Category: Steel Chase Nipples

PVC Coated Liquidtight Connector, Straight, 3/4 Inch, Material/Finish: Steel/PVC Coated

Category: Straight PVC Coated Type LT Connectors

Ring Terminal, Vinyl Insulated With Brazed Seam, 10 - 12 AWG, 3/8 Inch Stud, Copper, Yellow

Category: Vinyl Insulated Ring Tongues

Grounding Bushing, Insulated, Threaded, 2 Inch, 14 - 4 AWG, Malleable Iron/Zinc Plated Bushing, Aluminum/Tin Plated Lay-in Lug, Thermoplastic Insulator, Rated 150° Celsius, For Use With Rigid/IMC Conduit.

Category: Threaded Ground Bushings

D Series Ring Terminal, 8 AWG, 1.32 IN, Brazed Seam/Serrated Barrel, Copper, Metallic

Category: Non-Insulated Ring Tongues

Ring Terminal, Nylon Insulated, 12 to 10 AWG, 3/8 Inch Stud, 600 Volt, Yellow, Package of 50 EA

Category: Nylon Insulated Ring Tongues

Catamount 50 Series 1-Piece Standard Cable Tie, 11.64 IN L x .186 IN x .053 IN THK, Nylon/Polyamide 6.6

Category: Non-Releasable Cable Ties

Strut Clamp, Size: 2 Inch, 1-Piece, Steel/Electro-Galvanized

Category: Strut Channel One Piece Pipe Clamps

Interface Relay, Plug-In, 8 Amp, Single Pole Double Throw, 250 Volt AC Rated, 120 Volt AC Coil

Category: Power Interface Relays

Touch-Up Patching Compound, 16 OZ Brush Cap Can, Liquid, Dark Gray, 1.29

Category: Touch Up Paint

Butt Connector, Nylon Insulated, 12 - 10 AWG, Yellow, Pack of 500

Category: Nylon Insulated Butt Connectors

Non Metallic Cable Gland, 1 IN Thread, 0.709 To 0.984 IN Cable, 0.709 IN L Thread, Nylon 6

Category: Straight Low Profile Non-Metallic Cord Grips

Ring Tongue Terminal, Nylon-Insulated with Insulation Grip, Wire Range: 18 - 14 AWG, 600V, Stud Size: 1/4, Color: Blue. Package of 100. **Order in Multiples of 100**

Category: Nylon Insulated Ring Tongues

E-Z-Ground Type J Non Insulated Grounding Clamp, 10 To 2 AWG Conductor, 1-1/4 To 2 IN Pipe, Cast Bronze

Category: Bare Wire Ground Clamps

Ty-Rap, Standard Cable Tie, Non-Releasable, Nylon 6/6, Length: 11.6 Inch, Width: 0.19 Inch, Color: White, Maximum Wire Bundle: 3 Inch, Tensile Strength: 50 Pounds, Package Quantity: 100

Category: Non-Releasable Cable Ties

Ring Tongue Terminal, Wire Range: 12 - 10 AWG, 600V, Stud Size: 1/4, Color: Metallic. Package of 50.

Category: Non-Insulated Ring Tongues

Mechanical Lug, 1-Conductor, 1-Hole Mount, Aluminum, 6 AWG - 250 MCM, 5/16" Bolt Hole Size, Dual-Rated for Copper & Aluminum Conductors

Category: 1-Conductor Aluminum Mechanical Lugs

4 Inch Octagon Box Cover, Type: Blank, Steel

Category: Octagon Metallic Box Covers

Conduit Locknut, 3 Inch Diameter, Malleable Iron, For Use With Rigid/IMC Conduit

Category: Malleable Iron Conduit Locknuts

2", Snap-In Bushing, Non-Metallic, Package Quantity: 25. For Use With All Knockouts

Category: Knockout Bushings

Offset Nipple, Threaded, 3/4 Inch, Zinc Die Cast

Category: Zinc Die Cast Offset Nipples