"QSF-1/2-12-B"

1/4-20 x 1" Machine Screw, Slotted/Phillips Round Head, Zinc Plated Steel, 100 per Pack. *Dottie Part # 55804.*

Category: Slotted / Phillips Combo Round Head Machine Screws

Service Entrance Cable Connector, 3/4 Inch Diameter, Zinc Die Cast, For USe With NM and SEU Cable

Category: Zinc Die Cast NM Cable Connectors

OZ-Gedney Type 300R Hex Reducing Bushing, Size: 1-1/4 X 1 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Threaded, 1-15/16 IN Width Across Corners, 3/4 IN Thread Length, Flange Thickness: 3/16 IN, Third Party Certification: UL File Numb

Category: Iron Alloy Reducing Bushings

FDC Weatherproof Box, 1-Gang, Non-Metallic, (3) 3/4" Threaded Outlets (1 in each end, 1 in back). Includes (3) 3/4" to 1/2" Reducer Bushings and (2) Closure Plugs. Cubic Inches: 16".

Category: 1-Gang Non-Metallic Weatherproof Boxes

Chase Nipple, 1-1/4 Inch, Zinc Die Cast, For Use With a Conduit Coupling to Connect Conduit to a Box, or With a Locknut to Connect Two Boxes

Category: Zinc Die Cast Chase Nipples

OZ-Gedney Type LB Conduit Body, 4 IN Hub, Length: 16-5/8 IN, 5-5/8 IN Width, Sand-Cast Copper-Free Aluminum, Finish: Aluminum Enamel, Connection: Tapered FNPT, 3 (500 MCM) Conductors, 324 CU-IN Volume, Third Party Certification: UL File Number E-18095, CSA 009795, Applicable Third Party Standards: UL 514A, CSA C22.2 No.18, Federal Specification Number A-A-50563, Hazardous Locations: Class 1, Division 2 Per NEC Section 501-4(B), NEMA : FB-1, FB-2.10, For Rigid Conduit And IMC

Category: Type LB Aluminum Conduit Bodies

Knockout Seal, 1-1/4 Inch, Snap-In, Steel

Category: Steel Knockout Seals

2" to 1-1/2" PVC Conduit Reducer, Gray, For Use With Schedule 40 and 80 PVC Conduit

Category: PVC Reducers

Advanced Circuit Tracer Kit, 200+ Feet for Tracing, Includes: Transmitter, Receiver, Blade and Ground Prongs, Alligator Clips, 3' and 20' Lead Adapters, AC Plug Leads, Instructions, All Required Batteries, and Hard Carrying Case

Category: Circuit Tracers

Weatherproof In-Use Cover, 1 Gang, Multiple Insert Type, Low Profile, Extra Duty, 1-1/2 Inch Deep, Multiple Inserts Include: Duplex, GFCI, Toggle or Single Receptacle with 1.375, 1.625 or 1.75 Inch Opening, Vertical Mount, Non-Metallic, Gray, Padlockable Option Included.

Category: 1-Gang Weatherproof In-Use Box Covers

Clamp,beam,1 1/2 Conduit Thru 1/2 Flange

Category: Beam Clamps - Reversible

FD Device Box, 1-Gang, Malleable Iron Ridge Top, Cast Box, Hub Size: 1 Inch. Box Depth: 2.69 Inch Includes: Internal Ground Screw. For Use with Threaded Rigid Metal Conduit.

Category: 1-Gang Malleable Iron FS & FD Device Boxes

Reducing Coupling, 1-1/2 x 1-1/4 Inch, Black, Malleable Iron, All Fittings 100% Pressure Tested and Lead Free.

Category: Plumbing Pipe Reducing Couplings

8 Piece Spade Bit Kit, Flat Boring, Quik-Lok, Length: 6", Includes: 3/8", 1/2", 5/8", 3/4", 7/8" (22 mm), 1", 1-1/8" & Case.

Category: Spade Bit Kits

800T Momentary Flush Head Push Button, Black, Std, 1 NO 1 NC, 1 NO 1 NC, 1 NO 1 NC, 3 NO 3 NC

Category: 30mm Flush Pushbutton Operators

Fusetron Time Delay Midget Fuse, 625 A, 250 V, 200/10000 A, Class CC/Supplemental, Cylindrical Body

Category: Time Delay Midget Fuses

1-Gang, Decorator/GFCI Receptacle Wallplate, Standard Size, Screwless - Brown.

Category: 1-Gang Decorator Wallplates

5-Gang, Non-Gangable, 2-1/2 Inch Deep, Side Knockouts: (4) 1/2 Inch and 3/4 Inch Concentric, End Knockouts: (10) 1/2 Inch and 3/4 Inch Concentric, Bottom Knockouts: (5) 1/2 Inch and 3/4 Inch Concentric, Welded, Cubic Inches: 79.5, Steel

Category: Gangable Masonry Boxes

Electrical Color Coding Tape, Vinyl, 1/2 Inch x 20 Foot Length, 7 mm Thickness, 600 Volt, Temperature Rating: 221°F, White

Category: Color Coding Tape

Weatherproof Box, 1-Gang, Non-Metallic, Type "T", (3) 1/2" Threaded Outlets (1 in each end, 1 in back). Cubic Inches: 18". Gray. Includes: Mounting Feet. For Use with Non-Metallic Wiring Systems Only.

Category: 1-Gang Non-Metallic Weatherproof Boxes

Rigid/IMC Conduit Strap, 1-1/4 Inch, 1-Hole, Zinc Plated Steel, For Use With Rigid/IMC Conduit

Category: Steel 1-Hole Conduit Straps

Strut EMT Clamp, 1 Inch, 1-1/4 x 2.53 x 2.5 Inch, Assembled, Steel With Electro-Galvanized Finish

Category: Strut Channel EMT Conduit Clamps

Hex Bolt, 1/2" x 1-1/4", Stainless Steel, Order of 1 = Jar of 25

Category: Hex Head Bolts

Universal Beam Clamp, Hammer-On, Flange: 9/16 - 3/4", Thread: 1/4-20, Steel

Category: Flange Clips