"CCP2-2-60CF"

Conduit Body, Type: LB, Size: 3/4 Inch, Form 9, Material: Aluminum, For Use With Rigid/IMC Conduit

Category: Type LB Aluminum Conduit Bodies

2" Steel Raintight Compression Type Connector

Category: Steel Raintight EMT Compression Connectors

2 AWG Medium Voltage Cable, 15kV, EPR Insulation, PVC Jacket, 133% Insulation Level

Category: 15 kV Copper MV-105

Rigid Coupling, Three Piece, 1-1/2 Inch, Threaded, Malleable Iron, For Use with Rigid/IMC Conduit

Category: Iron Rigid Conduit Three Piece Couplings

(3) 4/0 AWG with (1) 2/0 AWG Ground, Quadruplex, Aluminum Conductor, 600V, Triple Rated, 1000 Foot Reel

Category: Quadruplex URD Direct Burial Wire

Fan/Fixture Box, For Suspended Ceilings, 2" Box Depth, Cubic Inches: 20, Plated Steel Installed Nm Cable Connector, Multiple Ko, For Fan/fixture Bracket Installation

Category: Octagon Metallic Ceiling Boxes With Hangers

4-11/16" Square Cover, 2-Device, Mud Ring, 3/4" Raised, Drawn, Metallic.

Category: 4-11/16" Square Metallic Box Mud Rings

Conduit Hanger with Swing Bolt, Diameter: 1/2 Inch, Steel/Zinc Plated, For Use With Rigid/IMC/EMT to Threaded Rod

Category: Conduit Clamps

12/2 Copper Conductors with Ground, 600V, Galvanized Interlocked Steel Armor, Solid, 250 ft. Coil. Wire Colors (480Y/277Volt): Yellow, Gray, Green. O.D.: .495"

Category: Solid Conductor Steel Armored Cable

Panduct® type G wide slot wiring duct, 1 W x 2 H, 6' length, PVC, black, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Sealing Fitting, Vertical, 1/2 Inch, Female, 25% Fill, Malleable Iron, For Close Turning Radius.

Category: Explosion-Proof Female Vertical Sealing Fittings

Non-Metallic, Cover Clip, 2400 Series, Size: 1-1/2", Ivory

Category: Small 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Healthcare Facilities Cable, Steel Flex, 12 AWG, 2 Conductors, Solid, Copper, 16 AWG Integral Bond, 1000 Foot Reel

Category: Solid Conductor Armored Health Care Facilities Cable

2" Straight Liquidtight Connector with Insulated Throat

Category: Malleable Iron Liquidtight Flex Connectors

EMT Compression Connector, 1/2 Inch, Zinc Die Cast, Concrete Tight, For Use With EMT Steel/Aluminum Steel Conduit

Category: Zinc Die Cast Concrete Tight EMT Compression Couplings

Locking PVC Clamp, Size: 1-1/2 Inch, Material: Non-Metallic

Category: Snap Lock Pipe Hangers

Non-Metallic Push On Connector, 1/2 inch, Angle 0° to 90°, Material: Non-Metallic, For use with Non-Metallic Liquidtight conduit, type B only.

Category: Zero To 90 Degree Adjustable Non-Metallic Liquidtight Flex Connectors

Meter Pak, Main Lugs, 2 x 125 Amp, 240 Volt AC, Ringless Socket, No Bypass, 5 Jaw, 200 Amp Bus, 1-Phase, OH/UG Feed, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Group Metering Meter Packs

Narrow Slot Wiring Duct, PVC, Blue, 2" W x 4" H x 6' Length, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

8/10 Amp Time-Delay Ferrule Fuse, Fibre, 13/32" x 1-1/2", 250 Volt, FUSETRON, Dual-Element, Fibre Tube, For circuits with high inrush currents

Category: Time Delay Midget Fuses

3/4" EMT, 1/2" Rigid Conduit Bender with Handle, SITE-RITE Hand Bender, Weight 64 lbs

Category: Hand Benders

Conduit Bushing, 1/2 Inch, Threaded, Malleable Iron, For use with Rigid Metal and IMC Conduit

Category: Rigid & IMC Bushings

EXGJH Flexible Coupling, 1/2 x 15 Inch Length, Explosionproof and Dust-Ignitionproof, Watertight, Stainless Steel End Fittings and Outer Braid, Stainless Steel Inner Core with Insulating Liner, Both End Fittings Female with Removable Male Nipple, For Use with Rigid/IMC Conduit

Category: Explosion-Proof Type ECGJH Couplings

Steel City® 6H3-B Conduit and Pipe Hanger With Bolt, 1-1/2 in, 1-1/4 in Conduit, Steel

Category: Conduit Clamps