"wiremold"

Duplex receptacle cover accepts one (1) Wiremold CM2 Series and 2A mini adapter (2A opening).

Category: Large 2-Piece Metallic Raceway Cover Plates

A/V device includes one prewired 20A duplex receptacle which can be wired as a standard receptacle or isolated ground. Finish flange available in gray (GY), black (BK), ivory (VY), brushed aluminum (AL) and brass finish (BS). Aluminum and brass flanges standard with black cover. Aluminum flange also available with an aluminum colored nonmetallic cover (AA). Brass flange also available with brass colored nonmetallic cover (AB). Includes one adpater to accept Legrand AVIP or Extron Electronics MAAP mini architectural adapter plates, Wiremold Open System adapters, and Ortronics TracJack and Series II mounting adapters. Modular Jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. AV3 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Gray

Category: Assembled Poke-Through Units

For use with 2400D-2N. Allows both power and low voltage at a single point-of-use. Accepts 5507 Series Faceplates, Ortronics TracJack and Series II Modules (requires S2-EPL Plate), Pass and Seymour Activate Series Inserts (requires CM-EPLA Plate), and Wiremold Open System Communication Modules (requires CM-EPLA Plate). Fog White

Category: Communication Module End Plates For Metallic Raceway

One 2A size Pass and Seymour Activate adapter included. Wiremold CM Series Open System inserts sold separately. NOTE: For RFB4-4DB Series Floor Boxes only. For use on tile, terrazzo, carpet, or wood covered floors. Additional configurations available. Please consult your local Sales Representative for more information.

Category: Recessed Floor Box Service Fittings

Kit comes complete with adapter ring to secure into the boxes, Wiremold CM Series open system adapters (unloaded), Ortronics Series II, and TracJack adapters. Modular jacks and A/V connectors sold separately.

Category: Round Recessed Box Covers

Unit is 13" [330.2 mm] and has one 15A gray duplex with adapter for Ortronics TracJack & Series II or Wiremold open system. Does not have communication opening. NOTE: Accommodates surface thicknesses from 0.7" to 1.9" [18mm to 48mm].

Category: Work Surface Power Centers

Unit includes one (1) 20A black tamper-resistant duplex receptacle. Second opening will accept adapter for one (1) Wiremold CM Series Open System 2A module, one (1) Ortronics Series II or one (1) TracJack adapter to accommodate a wide range of communication outlets. Adapters are included in hardware bag. Unit comes with a 6' [1.83m] cord. Comes with a black powder coat finish.

Category: Assembled Recessed Countertop Boxes

Includes one prewired 20A duplex receptacle which can be wired as a standard receptacle or isolated ground. Finish flange available in gray (GY), black (BK), ivory (VY), brushed aluminum (AL), and brass finish (BS). Aluminum and brass flanges standard with black cover. Aluminum flange also available with an aluminum colored nonmetallic cover (AA). Brass flange also available with a brass colored nonmetallic cover (AB). Includes one adpater to accept Legrand AVIP or Extron Electronics MAAP mini architectural adapter plates, Wiremold Open System adapters, and Ortronics TracJack and Series II mounting adapters. Modular Jacks sold separately. AV3 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Gray

Category: Poke-Through Cover Assemblies

Communication Bracket. For Activate (DTB-2-2AB) or Ortronics (DTB-2-2RT) devices. Ortronics and Activate adapters included. For use with: RFB4 Series Compartment Type Boxes.

Category: Recessed Floor Box Service Fittings

Multi-Service Assembled Poke-Thru Device Communication Adapter, For (2) 1/2 Inch Conduit Connectors, Non-Metallic

Category: Poke-Through Mounting Plates

Poke-Thru, Surface Style Cover Assembly, Diameter: 7-1/4 Inch Round, Gray

Category: Poke-Through Cover Assemblies

Device plate that will accept up to six (6) Extron Electronics MAAP style plates. For use in the center compartment only. Devices supplied by others.

Category: Recessed Floor Box Service Fittings

WIREMOLD PSRC9AMDTC-AL

Category: 3-Gang Raceway Device Boxes

WIREMOLD 897CTCAB FLOOR BOX TOP WITH DIVIDER/ADAPTER RING DUPLEX W/4 DATA PORTS ALL BRASS

Category: Round Recessed Box Covers

WIREMOLD PART #DQFF15UST

Category: Assembled Recessed Countertop Boxes

WMD EAL164 HANGER CLAMP ASSBL ATTACH POLE TO ANCHOR POINT ABOVE CEILING

Category: Tele-Power Pole Mounting Kits

Non-Metallic, External Elbow, 5400 Series. Size: 5-9/32" Height, 1-13/16" Width. PVC, Ivory.

Category: 2-Piece Non-Metallic Raceway Elbows

Floor Box Assembly, Furniture Feed, Diameter: 4 Inch, (2) 1/2 Inch and (1) 3/4 Inch Conduit Openings, (3) 1/2 Inch Knockouts, Material/Finish: Aluminum/Black, For Use in Raised Floor or Wood Floor Applications.

Category: Assembled Recessed Round Boxes

AV3 Poke-Thru Abandonment Plate, Nonmetallic, Material/Finish: Polycarbonate/Black

Category: Round Recessed Box Covers

4-INCH FURN FEED POKE-THRU ASSY BZ

Category: Assembled Poke-Through Units

GFI Cover Plate, 3-1/4 x 4-5/32 Inch, Flip Lid, Aluminum/Brass Powder-Coat

Category: Square / Rectangle Recessed Box Covers

Steel, 1-Gang, Device Box, 2400 Series. Size: 1-3/4" Deep, 4-5/8" Length, 2-7/8" Width. Includes: 1/2" Trade KO, Rectangular KO. Ivory.

Category: 1-Gang Raceway Device Boxes

<p>Blank Faceplate.</p>

Category: Recessed Floor Box Service Fittings

Non-Metallic, Wire Clip, 2400 Series. Size: 1"

Category: Small 2-Piece Metallic Raceway Clips, Connectors, & Couplings