"wiremold"

Labor saving, over-the-raceway device box. Divided two-gang box allows both power and low voltage at a single point-of-use. For use with commercially available faceplates. Fog White

Category: 2-Gang Raceway Device Boxes

Feeds 2400D Series Raceway. Back has two 1/2" trade size KOs and two rectangular KOs for communication cabling. Additional 1" and 3/4" concentric trade size KOs on each side. Fog White

Category: Small 2-Piece Metallic Raceway End Fittings

WMD XB814C520GY EXTERIOR BX C

Category: Rectangular Non-Metallic Underground Pull Boxes

Non-Metallic, Twin Snap Cover Device Bracket, 5400 Series. Size: 6" Length, 2-1/2" Height. PVC, Ivory.

Category: 1-Gang Raceway Device Brackets & Plates

Slide Holder Assembly, Nonmetallic, Brass Powder-Coat, For Use with Tile or Carpet Flooring.

Category: Poke-Through Cover Assemblies

Floor Box, Rectangular, (4) Compartment, Depth: 5 Inch, 1/2 & 3/4 Inch Knockouts, Housing: Die Cast Aluminum, Gray Tile Lid.

Category: Recessed Compartment Boxes

Service Box Plate, Metallic, Type: Communication Jack (One Side)

Category: Recessed Floor Box Service Fittings

Device plate dimensions: 2 3/4" x 4 1/2" (69mm x 114mm).

Category: Recessed Compartment Box Device Plates

Single Gang Plate, 1 Inch Knockout, Steel

Category: Recessed Floor Box Service Fittings

Steel, External Corner, 3000 Series. Size: 4" Length, 1-1/4" Width. Ivory.

Category: Large 2-Piece Metallic Raceway Elbows

Uniduct 2900 Series Internal Elbow Fitting, Non-Metallic, White

Category: 1-Piece Non-Metallic Raceway Elbows

Wmd 30tp-a Tele-pwr Pole Recp cover

Category: Power Pole Covers

Raceway Cover, Steel, 31.5" Length, G4000 Series, Gray

Category: Large 2-Piece Metallic Raceway Covers

Non-Metallic, Cover Clip, 5400 Series. Size: 5-3/32" Length, 3/4" Width. PVC, White.

Category: 2-Piece Non-Metallic Raceway Clips & Couplings

Steel, Combination Flat Elbow, 6000 Series. Size: 4-3/4". Gray.

Category: Large 2-Piece Metallic Raceway Elbows

Wiremold 2008ulbd20r 20a Power Strip W/15' Cord

Category: Work Surface Power Centers

WIREMOLD WMFB1SRN NICKEL FLOO

Category: Assembled Recessed Gang Boxes

For AC8840 and AC8104 Boxes. Includes two (2) Wiremold CM Series Open System adapters. NOTE: AC8840 is a single-service box. Power plates cannot be used in conjunction with communication plates.

Category: Communication Module End Plates For Metallic Raceway

For installing Wiremold CM2 Series inserts and Activate connectivity inserts. Provides flush installation. Includes 6A CM-MAB adapter.

Category: Metallic Raceway Connectors & Adapters

For installation requiring a GFCI or surge suppression receptacle and accepts three (3) Wiremold CM2 Series communication connectivity devices. Cover includes 6A mini adapter (6A-opening).

Category: Large 2-Piece Metallic Raceway Cover Plates

Wiremold 3346e Alum Single recept Cover 1.40

Category: Plugmold Covers

For RPSFB, RFSFB-OG, and RPNFB floor boxes. Kit comes complete with (2) prewired 20A duplex receptables, (receptables can be wired as standard receptacle, or isolated ground), flange and slide holder, adapter ring to secure into the boxes, divider (RP-DIV), Wiremold CM series open system adapters (unloaded), Ortronics Series II and TracJack adapters. Modular jacks sold seperately.

Category: Round Recessed Box Covers

Non-Metallic, Cover, 5500 Series. Size: 8' Length, 6-3/8" Width. PVC, Ivory.

Category: 2-Piece Non-Metallic Raceway Covers

Non-Metallic, 90° Flat Elbow, PN10 Series. Size: 3-11/16" Length. PVC, Ivory.

Category: 1-Piece Non-Metallic Raceway Elbows