"wiremold"

Male connector with 3/4 inch trade size conduit opening for connecting raceway to conduit boxes or panel boxes that have KOs for conduit. Can also be used with conduit type fittings. When used with 700 Series Raceway, break out crescent twistout in connector.

Category: Metallic Raceway Connectors & Adapters

Steel, FiberReady 2" Radius Full Capacity Internal Elbow, 4000 Series. Size: 3-3/4" Length, 1-3/4" Width. Ivory.

Category: Large 2-Piece Metallic Raceway Elbows

Steel, Cover Clip, 3000 Series. Size: 2-13/16" Length, 3/4" Width. Ivory.

Category: Small 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Steel, 2-Gang, Rectangle Opening Cover, 4000 Series. Size: 5-1/8" Length. Ivory.

Category: 2-Gang Raceway Box Covers

A full capacity tee fitting for branching raceway at right angles. Provides separation of services and 2" (51mm) cable bend radius for UTP and Fiber Optic installations. Ivory

Category: 2-Piece Non-Metallic Raceway Tee Fittings

Steel, Entrance End Fitting, 3000 Series. Size: 2" Height, 2-1/8" Width. Includes: Concentric: 1/2", 3/4" and 1" Trade Size KOs. Ivory.

Category: Small 2-Piece Metallic Raceway End Fittings

Steel, Prewired Plugmold, Length: 5 ft. Color: Ivory. Outlets (12") O/C: Total Outlets: (5) 15A, 125V: Single Circuit, Single Outlets.

Category: Single Circuit Steel Plugmold

Steel, External Cover, 2000 Series. Size: 1-7/8". Ivory.

Category: Small 2-Piece Metallic Raceway Elbows

Perma Surge Protector, 120 VAC, 15 A, 6 Outlets, 6 FT L Cord, Snap-On/Slide-Off Mount

Category: Commercial Grade Power Strips

GFI Cover Plate, 3.156 x 4.182 Inch, Flip Lid, Aluminum

Category: Square / Rectangle Recessed Box Covers

Poke-Thru Device, 4" Round, Evolution Series, Aluminum With Black Powder Coat Finish, Includes Surface Cover, (1) Prewired/Preinstalled Duplex Receptacle, and (1) Empty Gang

Category: Assembled Poke-Through Units

Multi-Service Assembled Poke-Thru Device Communication Adapter, For (2) 3/4 Inch Conduit Connectors, Non-Metallic

Category: Poke-Through Mounting Plates

Floor Box Cover, 1-Gang, Communication Cover Plate, Cover Type: Single Service (2-5/8 Inch or 1 Inch Opening), Device Type: Communication Cable, Brass

Category: Square / Rectangle Recessed Box Covers

Floor Box Cover, 1-Gang, (2) Breakouts, Non-Metallic, Color: Black

Category: Square / Rectangle Recessed Box Covers

Rectangular Floor Box, Adjustable, 2-Gang, Depth: 3-7/16 Inch, Steel

Category: Recessed Adjustable Floor Boxes

Ivory 500 Series raceway from Wiremold is ideal for surface mounting small amounts of electrical wiring or communication cables. These rugged raceways offer a low profile appearance which blend with any decor. Available in our exclusive ScuffCoat finish in 5 foot lengths. Finish - Ivory

Category: 1-Piece Metallic Raceway

Flush Poke-Thru Recessed Furniture Feed Assembly with Surface Style Cover. Size: 16-3/4" Height. Recessed 3-1/4" Below Floor Surface. Includes: (1) 3/4", (1) Concentric 2"-1-1/4" Screw Plug Opening, (3) Gang. For use with: 6" Diameter Cored Hole. Black Die-Cast Aluminum Cover.

Category: Assembled Poke-Through Units

Upper Panel Device Plate, 1-Gang, Duplex Receptacle, Metallic. For Use with AF Series Raised Floor Boxes.

Category: Recessed Compartment Box Device Plates

Accepts two (2) Wiremold CM Series Open System adapters (sold separately). NOTE: For use with RFB4E, RFB6, RFB6E Series Floor Boxes.

Category: Recessed Floor Box Service Fittings

Ivory 700 Series raceway from Wiremold is ideal for surface mounting small amounts of electrical wiring or communication cables. These rugged raceways offer a low profile appearance which blend with any decor. Available in our exclusive ScuffCoat finish in 5 foot lengths. Finish - Ivory

Category: 1-Piece Metallic Raceway

Cutout Cover Assembly. Die-Cast Aluminum. Color/Finish: Brushed Aluminum, For use in: Tile, Carpet.

Category: Square / Rectangle Recessed Box Covers

For 881 PVC Floor Box. Kit complete with prewired 20A duplex receptacle (receptacle can be wired as standard receptacle or Isolated Ground), flange and slide holder, 881ADP Adapter, and 881DIV Divider. Provided with Wiremold CM Series Open System unloaded adapters, Ortronics Series II and TracJack adapters. Modular jacks sold separately. CAUTION: Not for use on concrete pours less than 4 1/2" (114mm) deep. Not for use when concrete is the finished floor. Use only for tile, carpet, or wood covered floors. Black

Category: Round Recessed Box Covers

2-Gang, Floor Box, Depth: 3-7/16 Inch, (6) 1 Inch Conduit Openings, Cubic Inches: 94, Cast Iron

Category: Recessed Compartment Boxes

Mounting Plate, (1) 20A Duplex Receptacle, For Use With 6ATC/8ATC Series Poke-Thru Devices

Category: Poke-Through Mounting Plates