"wiremold"

Raceway Ground Clamp, 2400 Series

Category: Small 2-Piece Metallic Raceway Grounding Clamps

.040" (1.0mm) steel, 5' (1.5m) lengths. Base packed twenty 5' (1.5m) lengths per carton. Finish - Fog White

Category: Small 2-Piece Metallic Raceway Bases

Single-gang device plate that will accept up to six (6) ports of communication devices. Fits in any one (1) of the three (3) gangs in the center compartment. Devices supplied by others.

Category: Recessed Floor Box Service Fittings

Two-gang with two 6A mini adapter openings. Two adapters included. Accepts Wiremold Open System communication modules.

Category: Poke-Through Mounting Plates

BLANK EXPRESS POLE PAINTED BLACK

Category: Steel Power Poles

Non-Metallic, Blank End Fitting, 5500 Series. Size: 6-7/8" Length, 1-13/16" Width, 3/8" Depth. PVC, Ivory.

Category: 2-Piece Non-Metallic Raceway End Fittings

Steel, 1-Gang, Duplex Receptacle Cover, 3000 Series. Length. Ivory.

Category: 1-Gang Raceway Box Covers & Faceplates

Floor Box, 6 Gang, Evolution Series, 4.130 x 13.750 x 16.130 Inch, 915.980 Cubic Inches, Aluminum, Includes Protective/Disposable Cover, Tunnel System For Connecting Two Modules, (2) Removable Modules, (2) Toggle Clamps, (2) Cable Management Guides, (2) Levelling Support Legs, (2) "L" Brackets, and Knockouts Ranging from 3/4 - 2 Inch

Category: Square Recessed Floor Boxes

6' Plugmold Tamper-Resistant Multioutlet System Black

Category: Single Circuit Steel Plugmold

Steel, 13.5" Pre-Cut Cover, 4000 Series. Size: 4-3/4" Width. Gray.

Category: Large 2-Piece Metallic Raceway Covers

5 ' Steel Plugmold Multioutlet Strip with 5 single outlets spaced 12"

Category: Single Circuit Steel Plugmold

Accepts six Ortronics TracJack or three Series II datacom inserts. Both adapters included.

Category: Large 2-Piece Metallic Raceway Cover Plates

Half-gang 3/4" trade size conduit housing assembly. Includes junction box attached to 3/4" trade size conduit for electrical power connections. For use on side compartments only.

Category: Poke-Through Mounting Plates

.040" (1.0mm) steel, 10' (3m) lengths. Packed ten 10' (3m) lengths per carton. Fog White

Category: Small 2-Piece Metallic Raceway Bases & Covers

Closes off end runs of 5400 Series Raceway. Has four 1/2" trade size KOs for end feed. White

Category: 2-Piece Non-Metallic Raceway End Fittings

One-gang 3/4" trade size conduit housing assembly. Includes junction box attached to 3/4" trade size conduit for electrical power connections. NOTE: When using on a 6ATCFF Furniture Feed unit, 1BHA (sold separately) is required.

Category: Poke-Through Mounting Plates

Round Furniture Feed Floor Box, 6 Inch, (2) 3/4" Knockouts and (1) 1-1/2" Knockout, Die Cast Aluminum

Category: Round Recessed Floor Boxes

For mounting one or two keystone device modules. Has one opening and one KO. White

Category: 1-Gang Raceway Box Covers & Faceplates

For feeding corner drop raceway from larger conduits. Has concentric 3/4", 1", and 1 1/2" trade size KOs. Ivory

Category: 2-Piece Non-Metallic Raceway End Fittings

For transitioning from MXN2A08 Corner Drop to a horizontal run of 5400TB Series Raceway to the right. Ivory

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

Floor Box, Rectangular, Dual Service, Depth: 4", Metallic

Category: Recessed Adjustable Floor Boxes

Non-Metallic, Tee Fitting, 5400 Series. Size: 6-18/32" Length, 7-23/32" Width. PVC, Ivory.

Category: 2-Piece Non-Metallic Raceway Tee Fittings

4-INCH FURN FEED POKE-THRU ASSY NK

Category: Assembled Poke-Through Units

Labor saving, over-the-raceway device box. Divided two-gang box allows both power and low voltage at a single point-of-use. For use with commercially available faceplates. Fog White

Category: 2-Gang Raceway Device Boxes