"wiremold"

Aluminum, Cover, AL Series. Size: 5' Length, 4-7/8" Width, .075" Thickness. Satin Anodized Finish, Aluminum. Package Quantity: 8.

Category: Large 2-Piece Metallic Raceway Covers

Aluminum, Supporting Clip, AL Series. Size: 1-7/16". Aluminum.

Category: Small 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Ultrasonic Ceiling Sensor utilizing 32 KHz frequency ultrasonic technology to detect occupancy. Voltage: 24 VDC, Current: 40 ma. Automatic or manual-on operation when used with a BZ-150 Power Pack. Omni-directional transmission (360° coverage) 2200 Sq.ft., 90 linear feet. Features: Isolated relay. Mounts to ceiling tile or Wiremold V5738-WH box.

Category: Ultrasonic Occupancy Sensors

Stainless Steel, Prewired Plugmold, Tamper-Resistant, Length: 5 ft. Color: Stainless Steel. Outlets (6") O/C: Total Outlets: (8) 15A, 125V: Single Circuit, Single Outlets.

Category: Single Circuit Tamper Proof Plugmold

Four-Gang Cover, Two Duplex Openings, 4000 Series Raceway, Gray

Category: 4-Gang Raceway Box Covers

Steel, End Reducing Connector, 2000 Series. Size: 3/4". For use with: V500 Raceway. Ivory

Category: Small 2-Piece Metallic Raceway Connectors & Adapters

Includes single-gang box, one 15A, 125V tamper-resistant receptacle, and brass cover with two screw plugs. For hole cut dimensions, see installation instructions sheet. Box Dimensions: 2 1/8" W x 3 3/4" L x 3 7/8" D (54mm W x 95mm L x 98mm D) Device Plate: 3 1/8" W x 4 15/16" L

Category: Assembled Recessed Gang Boxes

For covering unused compartments in the device bracket. White

Category: 1-Gang Raceway Box Covers & Faceplates

For mounting devices 24" (610mm) on center using 3027AE, 3033JE, 3036HE, 3040CE, 3043, 3046, 3048R and 3051LE Series Device Plates. Gray

Category: Small 2-Piece Metallic Raceway Covers

WMD CRFB-KEY CRFB KEY KIT

Category: Recessed Floor Box Tools

For covering joint where two pieces of 5400TB Base come together. One clip per package. White

Category: 2-Piece Non-Metallic Raceway Clips & Couplings

Transition Fitting - Right / 5400 Series Raceway, Non-Metallic, White, Transition from MXN2A08 Corner Drop to Horizontal Run of 5400TB Series Raceway.

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

WMD 4STC 4IN STEM ASSEMBLY

Category: Assembled Poke-Through Units

For branches at right angles. Provides 2" (51mm) cable bend radius control for fiber optic and UTP/STP cable installations. Couplings included. Ivory

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Series II, two-port Clarity 6,T568A/B, 180 degree, Wiremold Gray

Category: Multimedia Outlet System Wallplate Inserts

WIREMOLD RFB11-OG LRG CAPACITY ONGRADE FLOOR BOX 6IN

Category: 1-Gang Raceway Device Brackets & Plates

WIREMOLD PA120T SENTREX SURGE

Category: Panel Mount Surge Protection Devices

MLX MUS-X230-WD5 CUST WIREMOLD IVRY FASCIA FITS CM2 2 KSJ

FLUSH TYPE EXT ADAPTER 2 GANG

WIREMOLD APCB1TM4 CONTROL BOX WITH PADDLE DIMMER

For branch raceway at right angles. Provides 2" (51mm) cable bend radius control for fiber optic and UTP/STP cable installations. Couplings included. Fog White

For use with 2400D-2N. Allows both power and low voltage at a single point-of-use. Accepts 5507 Series Faceplates, Ortronics TracJack and Series II Modules (requires S2-EPL Plate), Pass and Seymour Activate Series Inserts (requires CM-EPLA Plate), and Wiremold Open System Communication Modules (requires CM-EPLA Plate). Ivory

For 881 PVC Floor Box. Kit complete with flange, slide holder, 881 adapter, (1) one Wiremold Open System unloaded adapter, Ortronics Series II and TracJack adapters. Holds up to eight (8) ports of communication devices. Modular jacks sold separately. CAUTION: Not for use on concrete pours less than 4 1/2" (114mm). Not for use when concrete is the finished floor. Use only for tile, carpet and wood covered floors. NOTE: For carpet or tile installations. All cover plates are furnished with gasket and three screws. The 895P Polycarbonate Series Cover Plates must be field modified for dual service. Black

For 881PVC Floor Box. Kit complete with two (2) 20A duplex receptacles, (receptacles can be wired as standard or Isolated Ground), flange and slide holder, 881ADP Adapter, and 881DIV Divider. Provided with Wiremold CM Series Open System unloaded adapters, Ortronics Series II and TracJack adapters. Modular jacks sold separately. CAUTION: Not for use on concrete pours less than 4 1/2" (114mm) deep. Not for use when concrete is the finished floor. Use only for tile, carpet, or wood covered floors. Brass