"wiremold"

Floor Box, 10 Gang, Knockouts 3/4 to 2 Inch, Includes All Components Needed For Installation

Category: Square Recessed Floor Boxes

Add-On Power Cover for Tele-Power Pole, Aluminum

Category: Power Pole Covers

W-mold S4014a Wall Box Conn

Category: Large 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Steel, Prewired Plugmold, Length: 5 ft. Color: Gray. Outlets (12") O/C: Total Outlets: (5) 15A, 125V: Single Circuit, Single Outlets.

Category: Single Circuit Steel Plugmold

Stl Corner Box 2 1/2in. Deep White

Category: Metallic Raceway Tee Fittings

Internal Elbow for Aluminum Raceway, 90°, 7" Each Leg

Category: Large 2-Piece Metallic Raceway Elbows

5-1/2" Round Cover, Metallic, Cover Type: Single Door. Device Type: Decorator/GFCI Receptacle. Brass. For use in Carpet Applications.

Category: Round Recessed Box Covers

Non-Metallic, Prewired Plugmold, Length: 5 ft. Color: Ivory. Outlets (12") O/C: Total Outlets: (5) 15A, 125V: Single Circuit, Duplex Outlets.

Category: Single Circuit Non-Metallic Plugmold

WMD RFBA10R55OG RFBA 10G 5.5

Category: Square Recessed Floor Boxes

2800 Series Co-extruded design, smooth plastic finish with adhesive backing. Available in 8' (2.44m) lengths, packed 160' (48.8m) per carton. Finish - Ivory

Category: 1-Piece Non-Metallic Raceway

Has one 2" trade size knockout.

Category: Recessed Floor Box Service Fittings

Multiple Service Floor Box Cover Kit, Brass

Category: Round Recessed Box Covers

Aluminum floor box construction with three 1/2" trade size knockouts: two on the sides and one on the bottom. 18 cu. in. (295 cu.cm) capacity. Requires a 4" (102mm) diameter hole and overall floor depth of 1" (25mm). Assembled with scrub water gasket. For use on tile, wood, or carpet floors. Unit comes with a 15A quad receptacle and a brushed brass flange and black color device plate.

Category: Assembled Recessed Round Boxes

6-INCH ABANDON PLUG

Category: Assembled Poke-Through Units

This box has a 4" (102mm) depth design and can accommodate two duplex power receptacles on one side. Power plate with duplex knockouts included with box. The communication plate will accept two communication adapters for up to 12 ports of activation. Lids can be rotated 180¦ for easy orientation. Gray lids are die-cast zinc construction. NOTE: For custom options, consult factory. All boxes are sold with one power plate: 4" (102mm) deep boxes have plate with two power duplex receptacle KOs, 5" (127mm) deep boxes have plate with four power duplex receptacle KOs. All communication plates sold separately.

Category: Assembled Recessed Gang Boxes

<p>Installed either before or after concrete pour to create activation from duct. 1"" height.</p>

Category: Recessed Floor Box Service Fittings

The 880CM3 Omnibox Floor Box Series provides an excellent activation solution for applications where single service is required in open space areas. The 880CM3 floor box is offered in a stamped steel construction, designed to be installed in above grade concrete floor applications and to meet a wide range of market requirements.

Category: Square Recessed Floor Boxes

Steel, 1-Gang, Deep Device Box, 2400 Series, Dual-Channel, Size: 4-5/8" Length, 2-7/8" Width, 1-3/4" Depth. Includes: 1/2" Trade Size KOs, Flush Wall Box, Color: White.

Category: 1-Gang Raceway Device Boxes

Steel, Prewired Plugmold, Tamper-Resistant, Length: 6 ft. Color: White. Outlets (6") O/C: Total Outlets: (11) GFCI, 15A, 125V: Single Circuit, Single Outlets. Built-in GFI Breaker.

Category: Single Circuit Tamper Proof Plugmold

Aluminum, Cover, AL Series. Size: 5' Length. Aluminum.

Category: Small 2-Piece Metallic Raceway Covers

5-1/2" Round Cover, Metallic, Cover Type: 2-5/8" Opening (w/o Abandon Plug), Device Type: Communication or Power. Material: Brass. For use in Carpet, Wood, Laminate, or Tile Flooring.

Category: Round Recessed Box Covers

Non-Metallic, Tee Fitting, 2700 Series. Size: 2-3/16" Length, 11/16" Width. PVC, Ivory.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Conversion Kit, Includes: 825A (2-1/4") , 825C, 825L, 825N, For Carpet or Tile Installations

Category: Round Recessed Box Covers

Non-Metallic, 2-Gang, Device Box, Size: 4-7/8" Length, 4-3/4" Width, 1-3/4" Depth, PVC, Ivory

Category: 2-Gang Raceway Device Boxes