"wiremold"

For 881 PVC Floor Box. Kit complete with prewired 20A duplex receptacle (receptacle can be wired as standard receptacle or Isolated Ground), flange and slide holder, 881ADP Adapter, and 881DIV Divider. Provided with Wiremold CM Series Open System unloaded adapters, Ortronics Series II and TracJack adapters. Modular jacks sold separately. CAUTION: Not for use on concrete pours less than 4 1/2" (114mm) deep. Not for use when concrete is the finished floor. Use only for tile, carpet, or wood covered floors. Black

Category: Round Recessed Box Covers

2-Gang, Floor Box, Depth: 3-7/16 Inch, (6) 1 Inch Conduit Openings, Cubic Inches: 94, Cast Iron

Category: Recessed Compartment Boxes

Mounting Plate, (1) 20A Duplex Receptacle, For Use With 6ATC/8ATC Series Poke-Thru Devices

Category: Poke-Through Mounting Plates

Non-Metallic, 1-Gang, Shallow Device Box, 2300 Series. Size: 4-3/4" Length, 3" Width, 7/8" Depth. PVC, White.

Category: 1-Gang Raceway Device Boxes

Service Box Plate, Metallic, Type: Duplex Receptacle Opening (One Side)

Category: Recessed Floor Box Service Fittings

Duplex Cover Plate with Flip Lid, Size: 4-1/4 Inch, Aluminum

Category: Round Recessed Box Covers

Cover Cutter for 4000 & 6000 Series Raceway Cover.

Category: Raceway Tools

Poke-Thru Device, Flush, Assembled Unit, Non-Metallic Cover, Color: Black with Black Flange. Diameter: 7-1/2 Inch. Depth: 9 Inch. Includes: Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade), (2) Ortronics TracJack Mounting Bezel & (2) Ortronics Series II Communication Housing (Devices Sold Separately). For use with Carpet or Tile Applications.

Category: Assembled Poke-Through Units

Poke-Thru Device, Flush, Assembled Unit, RC4 Series, Non-Metallic Cover, Color: Gray. Diameter: 8-1/4 Inch. Depth: 9-1/16 Inch. Includes: Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade), (1) Ortronics TracJack Mounting Bezel & (1) Ortronics Series I. For Use with Carpet, Wood or Tile Flooring

Category: Assembled Poke-Through Units

Round, Adjustable Floor Box, Steel, Depth: 2-3/4 Inch, Cubic Inches: 39 Inch, Knockouts: Sides: (1)-1/2 x (1) 3/4 & (1) 3/4 x (1) 1 Inch, Bottom: (2) 1/2 Inch & (2) 3/4 Inch, Adjustments: 1-3/4 Inch (Before Pour) or 1/2 Inch (After Pour)

Category: Recessed Adjustable Floor Boxes

Multi-Service Assembled Poke-Thru Device Communication Adapter, For (2) 3/4 Inch Conduit Connectors, Non-Metallic

Category: Poke-Through Mounting Plates

Cover Plate Flange, 1-Gang, OmniBox Series, Metallic, Cover Type: Flip, Color: Aluminum, WxL: 3-5/16 Inch x 4-5/16 Inch, Accepts: GFI, Duplex, For Use with Carpet, Wood, and Tile Flooring.

Category: Square / Rectangle Recessed Box Covers

Rectangular Floor Box, Adjustable, 2-Gang, Depth: 3-7/16 Inch, Steel

Category: Recessed Adjustable Floor Boxes

Upper Panel Device Plate, 1-Gang, Duplex Receptacle, Metallic. For Use with AF Series Raised Floor Boxes.

Category: Recessed Compartment Box Device Plates

Duplex Receptacle Faceplate, Tele-Power Pole Series, Ivory, For 15 and 20 Amp Duplex Receptacles - G3007C Device Backet Included

Category: Power Pole Covers

Steel, FiberReady 2" Radius Full Capacity Flat Elbow, 4000 Series. Size: 8-3/4" Length, 1-3/4" Width. Ivory.

Category: Large 2-Piece Metallic Raceway Elbows

Cover Plate, 1-Gang, Type: 1/2" and 2" Screw Plugs, Includes Gasket and Screws, Aluminum

Category: Square / Rectangle Recessed Box Covers

For 881PVC Floor Box. Kit complete with two (2) 20A duplex receptacles, (receptacles can be wired as standard or Isolated Ground), flange and slide holder, 881ADP Adapter, and 881DIV Divider. Provided with Wiremold CM Series Open System unloaded adapters, Ortronics Series II and TracJack adapters. Modular jacks sold separately. CAUTION: Not for use on concrete pours less than 4 1/2" (114mm) deep. Not for use when concrete is the finished floor. Use only for tile, carpet, or wood covered floors. Black

Category: Round Recessed Box Covers

4-1/4" Round Cover, Metallic, Cover Type: single door. Device Type: Duplex Receptacle. Color: Brushed Aluminum. For use in Carpet Applications.

Category: Round Recessed Box Covers

1-Gang, Floor Box Cover, Non-Metallic, Cover Type: Dual Service. Device Type: Communication Cable. Color: Brass.

Category: Square / Rectangle Recessed Box Covers

For making smooth, accurate bends, saddles and offsets in Wiremold 500 and 700 Series Raceways. Two0piece handle fits in tool box.

Category: Raceway Tools

Floor Box Cover, 1-Gang, Non-Metallic, Cover Type: Non-Metallic GFI. Device Type: Decorator/GFCI Receptacle. brown.

Category: Square / Rectangle Recessed Box Covers

Reducing Connector Fitting, For Transitioning From 800 Series Raceway To 400 Series Raceway. Ivory

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

Stainless Steel, Prewired Plugmold, Tamper-Resistant, Length: 3 ft., Outlets (6") O/C: Total Outlets: (6) GFCI, 15A, 125V: Single Circuit, Single Outlets. Built-in GFI Breaker.

Category: Single Circuit Tamper Proof Plugmold