"wiremold"

2800 Series Co-extruded design, smooth plastic finish with adhesive backing. Available in 8' (2.44m) lengths, packed 160' (48.8m) per carton. Finish - Ivory

Category: 1-Piece Non-Metallic Raceway

Has one 2" trade size knockout.

Category: Recessed Floor Box Service Fittings

Multiple Service Floor Box Cover Kit, Brass

Category: Round Recessed Box Covers

Aluminum floor box construction with three 1/2" trade size knockouts: two on the sides and one on the bottom. 18 cu. in. (295 cu.cm) capacity. Requires a 4" (102mm) diameter hole and overall floor depth of 1" (25mm). Assembled with scrub water gasket. For use on tile, wood, or carpet floors. Unit comes with a 15A quad receptacle and a brushed brass flange and black color device plate.

Category: Assembled Recessed Round Boxes

6-INCH ABANDON PLUG

Category: Assembled Poke-Through Units

This box has a 4" (102mm) depth design and can accommodate two duplex power receptacles on one side. Power plate with duplex knockouts included with box. The communication plate will accept two communication adapters for up to 12 ports of activation. Lids can be rotated 180¦ for easy orientation. Gray lids are die-cast zinc construction. NOTE: For custom options, consult factory. All boxes are sold with one power plate: 4" (102mm) deep boxes have plate with two power duplex receptacle KOs, 5" (127mm) deep boxes have plate with four power duplex receptacle KOs. All communication plates sold separately.

Category: Assembled Recessed Gang Boxes

<p>Installed either before or after concrete pour to create activation from duct. 1"" height.</p>

Category: Recessed Floor Box Service Fittings

The 880CM3 Omnibox Floor Box Series provides an excellent activation solution for applications where single service is required in open space areas. The 880CM3 floor box is offered in a stamped steel construction, designed to be installed in above grade concrete floor applications and to meet a wide range of market requirements.

Category: Square Recessed Floor Boxes

<p>Combination device plate that will accept up to three (3) Extron Electronics MAAP style plates, and up to two (2) ports of communication devices. For use in the center compartment only. Devices supplied by others.</p>

Category: Poke-Through Mounting Plates

2400D Series Right angle turns on same surface. Finish - Fog White

Category: Small 2-Piece Metallic Raceway Elbows

WMD EFB6M 6-GANG MODULE ASSEM

Category: Recessed Floor Box Service Fittings

WMD XBLNT LOCKNUT TOOL

Category: Rectangular Non-Metallic Underground Pull Boxes

WLK 6ATC2PCRBK 6IN PRWRD SURF

Category: Assembled Poke-Through Units

Poke-Thru, Tamper-Resistant, Surface Style Cover Assembly, Diameter: 7-1/4 Inch Round, Black

Category: Poke-Through Cover Assemblies

Accepts four Extron Electronics MAAP single space modules.

Category: 2-Gang Raceway Box Covers

This box has a 4" (102mm) depth design with an extra 2" (51mm) of width for additional wiring capacity. These boxes can accommodate two duplex power receptacles on one side. Power plate with duplex knockouts included with box. The communication plate will accept two communication adapters for up to 12 ports of activation. Lids can be rotated 180¦ for easy orientation. Gray lids are die-cast zinc construction. NOTE: For custom options, consult factory. All boxes are sold with one power plate: 4" (102mm) deep boxes have plate with two power duplex receptacle KOs, 5" (127mm) deep boxes have plate with four power duplex receptacle KOs. All communication plates sold separately.

Category: Assembled Recessed Gang Boxes

Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly. Lid area is flush with the finished floor, no cutouts provided. TR indicates tamper-resistant version secured with tamper-resistant screw. Finish - Aluminum

Category: Square / Rectangle Recessed Box Covers

Prewired snap-in 20A receptacle can be wired as standard duplex or isolated ground. Available only in black. See installation instructions with replacement receptacle for complete installation details.

Category: Recessed Floor Box Service Fittings

European device plate accepts up to (45mm x 67.5mm) Arteor device. Device plate dimensions: 2 3/4" x 4 1/2" (69mm x 114mm).

Category: Recessed Compartment Box Device Plates

Round Floor Cover, Diameter: 5-1/2 Inch, Single Service 3/4 Inch Opening, Device Type: Communication. Color: Bronze. For use in Carpet Applications.

Category: Round Recessed Box Covers

Lab Bench Portal

Category: 1-Gang Decorator Wallplates

Wm Al5210b1 End Ftg W/ 1/2in.

Category: Large 2-Piece Metallic Raceway End Fittings

Accepts only Ortronics datacom inserts. Supplied with both adapters to accommodate two TracJack devices or one Series II device. For AL3300 Series Raceway. Finish - Anodized Aluminum

Category: Large 2-Piece Metallic Raceway Cover Plates

A full capacity tee fitting for branching raceway at right angles. Provides separation of services and 2" (51mm) cable bend radius for UTP and Fiber Optic installations. White

Category: 2-Piece Non-Metallic Raceway Tee Fittings