"wiremold"

6' Plugmold Multioutlet USB system Gray

Category: Single Circuit Tamper Proof Plugmold

Blank Flanged Cover Assembly. Die-Cast Aluminum. Color: Black. For use with: Tile, Carpet. Origin: USA

Category: Square / Rectangle Recessed Box Covers

Includes 6" diameter poke-thru stem assembly with a disposable plate. Devices are recessed 3 1/4" (83mm) below floor surface. No cover assembly is included. For use with the following cover assemblies (purchased separately): 6CTC and 6CT Series. INCLUDED: For Side Compartments: Two (2) proprietary 20A Duplex Power Receptacles installed. For Center Compartment: One (1) 6ACT8A Mounting Plate, One (1) 6TRAC Mounting Plate, One (1) 6SER Mounting Plate. For Bottom Feed Compartment: One (1) 5BLH 1/2-Gang Pass-Through Blank Housing Assembly (Tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA.) , One (1) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors. Receptacles can be wired as a standard or isolated ground device.

Category: Assembled Poke-Through Units

For deep switches and receptacles. Base has two 1/2" trade size KOs. Larger gang boxes available by special order. Five-gang: 4 5/8" L x 10 5/32" W (117mm x 258mm). NOTE: Certified to Canadian Safety Standards for sale in Canada. When ordering these products, change the "V" color prefix to "VC" to denote the Canadian versions.

Category: 5-Gang Raceway Device Boxes

Nonmetallic slide holder assembly. Available in black (BK), gray (GY), ivory (VY), nonmetallic brass (BS), and nonmetallic aluminum (AA). Assembled with scrub water gasket. For use on tile or carpet floors.

Category: Poke-Through Cover Assemblies

Receptacle opening 1 9/16" (40mm). For 6" poke-thru units only.

Category: Square / Rectangle Recessed Box Covers

Receptacle opening 1 9/16" (40mm). For 8" poke-thru units only.

Category: Recessed Floor Box Service Fittings

For making a 90 degree external turn in a raceway run. Includes four ALA01 Couplings.

Category: Large 2-Piece Metallic Raceway Elbows

6' Plugmold Multioutlet System with 8 single outlets 9 inches apart, GB Finish - Gray

Category: Single Circuit Steel Plugmold

WMD EFB6810BTBK EVO FLR BX FL

Category: Recessed Compartment Box Covers

<p>Attaching ring for Source I (preset or afterset) zinc die-cast. 4'' (102mm) O.D. 7/8'' ring depth.</p>

Category: Recessed Floor Box Service Fittings

Polycarbonate communications or power cover plate. Includes one plug with 3/4" (19mm) opening, one plug with 1" (25mm) opening, and one plug with 2 5/8" (67mm) opening. For pass-through only. NOTE: For carpet or tile installations. All cover plates are furnished with gasket and three screws. The 895P Polycarbonate Series Cover Plates must be field modified for dual service. Anodized Aluminum

Category: Round Recessed Box Covers

WMD V20GB509TRUSBA USB PLUGMO

Category: Single Circuit Tamper Proof Plugmold

In-Wall Storage Box with Flange and Cover, Allows Compatibility With Standard 3.5" Studs & 2.5" Studs, Drywall And Stud Mountable, Knockouts For Single Gang Outlets And 1-1/4", 1", & ½"Conduit, Integrated Universal Zip Tie Anchor Points, Enclosure UL 2416 Listed For Installation Of AV, IT & Communication Technology Equipment: Stores A Large Variety Of AV Components, Landscape/Portrait Installation, L: 9", H: 14.25" , D: 3.9", Black

Category: Recessed Home Entertainment Boxes

Steel, Power/Data Pole. Color: Gray. Length: 12'5". (2) Spec Duplex Outlets, 20A, 125V. Removable Cover with KO's for Data Connectors.

Category: Steel Power Poles

WMD 125CRR

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

RFBA 2G 3.0 IN CIRC CVR FLOOR BOX

Category: Recessed Compartment Boxes

Steel, Prewired Plugmold, 3 Foot Length, Ivory. Outlets (6") O/C: Total Outlets: (6) 20A, 125V: Single Circuit, Single Outlets.

Category: Single Circuit Steel Plugmold

Non-Metallic, 1-Piece Raceway, PN05 Series. Size: 8' Length, 1-1/8" Width, 5/8" Height. PVC, Ivory.

Category: 1-Piece Non-Metallic Raceway

Adjustable Floor Box, 1-Gang, Steel, Depth: 2-15/32". Cubic Inches: 37". Knockouts: (5) 1/2" & (5) 3/4". Adjustments: 1-3/4" (Before Pour) or 1/2" (After Pour)

Category: Recessed Adjustable Floor Boxes

FLOORPORT LARGE FLANGED CUTOUT TOP

Category: Recessed Compartment Box Covers

Poke-Thru Cover Assembly, Surface Style, 4 Inch Diameter, Aluminum Die Cast with Brushed Aluminum Finish

Category: Poke-Through Cover Assemblies

Non-Metallic, Flexible Corduct. 1600 Series. Size: 10' Length, 3-11/32" Width, 30/32" Height. Color: Black.

Category: Non-Metallic Overfloor Raceway

W-mold G2015 6-in Gry Tee

Category: Small 2-Piece Metallic Raceway Tee Fittings