"CCP2-NFPA-1"

Breaker, QO, 20 Amp, 1-Pole, 120 Volt AC, 10 kA, Plug In, High Magnetic

Category: Residential 1-Pole Circuit Breakers

Liquidtight Connector, 1/2 Inch, Straight, Non-Metallic

Category: Straight Non-Metallic Liquidtight Flex Connectors

Lay-In Type 1 Screw Cover Wireway, Straight Section, Size: 12 Inch Wide, 12 Inch Deep, 1 Foot Length, 14 Gauge Steel, ANSI 61 Gray Polyester Powder Paint Finish, NO KNOCKOUTS

Category: Screw Cover Wireway

Designed for indoor use for applications that require a junction or pull box to secure and manage electrical connections.

Category: NEMA 1 Screw Cover Enclosures

EMT Compression Connector, 1/2 Inch Diameter, Insulated Throat, Concrete Tight, Steel/Zinc Plated, For Use with EMT Conduit

Category: Steel Concrete Tight EMT Compression Connectors

Drive, Variable Frequency, PowerFlex 40, 120 Volt AC, 1 Phase, 5.0 Amp, 0.75 Kilowatt, 1.0 Horse Power, No Filter, IP66, NEMA 4X

Category: 1-Phase Input 115 Volt AC Operated Variable Frequency Drives

1-Gang, FSX Type, Malleable Iron Ridge Top, Cast Box. Hub Size: 3/4 Inch. Box Depth: 2.00 Inch Includes: Internal Ground Screw. For use with Threaded Rigid Metal Conduit.

Category: 1-Gang Malleable Iron FS & FD Device Boxes

1/2 STANDARD DRAIN

Category: Explosion-Proof Universal Drains / Breathers

SPAN Drive Level 2 EV Charger, Single Phase, 208-240 Volts, 48 Amps, 20 ft Cable Length ***Must be a certified SPAN installer to install and commission SPAN panels***

Category: Level 2 Residential Electric Vehicle Chargers

M18 FUEL™ 1/2 Compact Impact Wrench w/ Pin Detent, 4-Mode DRIVE CONTROL™, Mode 1 RPMs: 0-900; Mode 2 RPMs: 0-1,650; Mode 3 RPMs: 0-2,400; Mode 4 RPMs: 0-2,400, Tri-LEDs For Dark Spaces, ***Bare Tool Only, Battery & Charger Sold Separately***

Category: Cordless Heavy Duty Impact Wrenches

1/4-20 X 1 PAN HEAD PHILLIP M/S 18-8SS 100/UNIT

Category: Phillips Pan Head Machine Screws

CLB S612CLCN00 1-1/4" X CLOSE

Category: Stainless Steel Conduit Nipples

1/2 Inch 316 Stainless Steel Grounding Hub, Thermoplastic Insulating Throat, Sealing Ring Nitrile (BUNA-N) for Use with Rigid/IMC Conduit

Category: Stainless Steel Conduit Hubs With Grounding

Standard Radius Conduit Elbow, 1/2 IN, 90 Deg, Steel, Hot Dipped Galvanized

Category: PVC Coated Rigid Conduit Elbows

U-Bolt with Hex Nut, 1/2 Inch, Heavy Duty, Mechanically Galvanized, For Rigid, IMC & EMT

Category: U Bolts

TYM COLB150 1-1/2 IN COMBO LB

Category: Type LB Aluminum Conduit Bodies

IMC/Rigid Conduit Reducing Washer, Type Flat, Large End Trade Size 2 Inch, Small End Trade Size 1/2 Inch, Size 0.88 Inch ID x 3 Inch OD, Material Zinc Pre-Galvanized Steel, Approval UL 514B, CSA C22.2, Applicable Standard NEMA FB-1

Category: Reducing Washers

OZG 4Q-150FM 1-1/2" COMB CP L

Category: Steel Rigid To Liquidtight Combination Couplings

Plastic Cable Staple, 2-Nail Type, 1/2" Wide, NM & UF, Bag of 100

Category: Cable Staples

Weatherproof Outlet Box, 1 Gang, (3) 3/4 Inch Threaded Outlets, 2.625 Inch Deep, Aluminum, Gray, Detachable Lugs, (2) Close-Up Plugs, and Self Tapping Ground Screw Included.

Category: 1-Gang Metallic Weatherproof Boxes

Cable Gland, Size: 40, NPT: 1-1/2 Inch, Cable Range: 1.098 to 1.591 Inch, Explosion-Proof, Nickel Plated Brass, For Use With Armored Cable

Category: Cable Glands - Nickel Plated Brass

Designed for indoor use for applications that require a junction or pull box to secure and manage electrical connections.

Category: NEMA 1 Screw Cover Enclosures

4 Furniture Feed Poke-Thru Device, Flush Mount, Diameter: 4 Inch, (1) 1-1/2 Inch Screw Plug and (1) 3/4 Inch Screw Plug, Non-Metallic Cover, Black

Category: Assembled Poke-Through Units

Bayonet Knob Fuse Holder for 13/32" x 1-1/2" Fuses, 30A, 600V

Category: Panel Mount Fuse Holders