"3/4"

Rigid Compression Coupling, 1/2 Inch, Concrete Tight, Malleable Iron/Steel, For Use with Threadless Rigid/IMC Conduit

Category: Rigid Compression Couplings - Iron

Pro-Pull™ Measuring Pull Tape, 2500 lb. Tensile Strength, 3000 Foot Reel

Category: Measuring Pulling Tape

4 Inch Housing IC Air-Tite, 12V, New Construction, For Use With MR16 Lamps

Category: 4" IC Rated Recessed Lighting Housings

3-1/2" Diameter, Old Work Ceiling/Fixture Box with Speed Clamps, Thermoset Fiberglass, Depth: 2". Cubic Inches: 14.0". Fixture Weight: 15 lbs. Includes: Snap Bracket with Ears and Ground Strap

Category: Round Non-Metallic Old Work Ceiling / Fixture Boxes

THB L973 NON-INS - TUB RING 3

Category: Non-Insulated Ring Tongues

Hubbell Wiring Device Kellems, Locking Devices, Twist-Lock, Economy,Receptacle, 50A 125/250V, 3-Pole 4-Wire Grounding, Non-NEMA, ScrewTerminal, Black

Category: 50 Amp Non-NEMA Twist Lock California Style Receptacles

4 Inch Square Extension Ring, 1-1/2 Inch Depth, Welded, Steel/Galvanized

Category: 4" Square Metallic Box Extension Rings

Programming Port, Cat6e, 15 Amp, 120 Volt AC Duplex, 3 Amp Breaker, Size K, Type 4-IP65, M2 Housing, Panel Mount

Category: Data Interface Ports

OZ-Gedney Type PLG Patented Threaded Insert Plug, Size: 3-1/2 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Threaded NPT, Body Thick: 1-1/4 IN, Third Party Certification: UL File Number E-34997 Suitable For Wet Locations, UL Listed F

Category: Explosion-Proof Recessed Head Close-Up Plugs

Selector Switch, 3 Position, Knob, Spring Return, Right or Left to Center, 1 Normally Open, 1 Normally Closed Contact Block, Cam Code 4

Category: 30mm Knob Selector Switches

Powers™ 6307 Dropin™ Manual Anchor Setting Tool, 3/8 in Bolt, For Use With 3/8 in DI+, Drop-In Anchors

Category: Anchor Setting Tools

Fan Housing, Duct Size 3 inches, Dimensions 3-5/8 by 7-1/2 by 1-1/4 inches. Compatible with 1688F, 1689F

Category: Fan Housing Parts

Steel, Connection Cover, 700 Series. Size: 3/4". White.

Category: Metallic Raceway Connectors & Adapters

Enclosure, Continuous Hinge with Clamps, NEMA 4, 20 x 20 x 8 Inch, Steel/Gray Powder Coat ***Discontinued, See Sub***

Category: NEMA 4 Wall Mount Enclosures

Reciprocating Saw Blade, Super Sawzall, 18 TPI, Length: 4", Includes: (5) Blades.

Category: Titanium Edge Metal Cutting Reciprocating Saw Blades

Safety Contactor, 100S, 37 Amp, Line Side Termination, 110/120 Volt AC Coil, 3 Normally Open., 4 Normally Closed, Bifurcated Contact

Category: IEC Contactors - 17-37 Amp

Twist-Lock Single Receptacle, 20A, 3 Phase Y 120/208V AC, L21-20R, 4-Pole 5-Wire Grounding, Black

Category: 20 Amp NEMA Twist Lock Single Receptacles

Ring Tongues, Wire Range: 8, Stud Size: 1/4, Color: Metallic, 10/PK

Category: Non-Insulated Ring Tongues

Receptacle, Surface, Dryer, 30 Amp, 125/250 Volt, NEMA 14-30, 3 Pole, 4 Wire, Grounding, AL/CU, Black.

Category: 30 Amp Straight Blade Receptacles

Terminal Block, Push In, Center Jumper, 4-Pole, Orange, 20 per Pack

Category: Terminal Block Jumper Bars

Hole Saw, Carbide, Split Point, Diameter: 1-1/8", Arbor Size: 5l Snap-back, 5l, Chuck Size: 1/2", Conduit Size: 3/4".

Category: Carbide Grit Hole Saws

One Gang Square Device Cover, 1.5 Cubic Inches, 4 Inch Square x 1/4 Inch Raised, Pre-Galvanized Steel, Offset, Keyed for Plaster

Category: 4" Square Metallic Box Mud Rings

Sensor, Photoelectric, Polarized Retroreflective, LaserSight, 12 mm, Metal Cylindrical, 10 - 30 Volt DC, 25 mA, Light Output/Dark Output Complementary, 3 mm - 30 m, Sensing Distance, 4 Pin DC Micro Connector

Category: High Performance Reflex Photoelectric Sensors

4 Inch PVC 45 Degree Elbow, Schedule 40, Gray

Category: Schedule 40 45° Elbows