"CCP2R-3-30CC"

High & Low Voltage Linerless Splicing Compound Tape, Unprinted. Size: 3/4" Width, 15' Length. Thickness: 30 mils. Temperature Rating: 194°F. Color: Black.

Category: Linerless Rubber Splicing Tape

Conduit Locknut, 3/4 Inch Diameter, Threaded, Steel With Zinc Finish, For Use With Rigid/IMC Conduit

Category: Steel Conduit Locknuts

Strut Strap, Universal, 3/4 Inch, Material: Steel, Finish: Electro-Galvanized, .060 Inch Thickness, Universal Clamp for EMT, IMC & GRC.

Category: Strut Channel Universal Conduit Clamps

Band Saw Blade, Deep Cut, Length: 35-3/8 Inch, Width: 1/2 Inch, Teeth Per Inch: 18 TPI, 3-Pack

Category: Bandsaw Blades

Conduit Locknut, Threaded, 3/4 Inch, Steel, For Use With Rigid/IMC Conduit, UL 467, UL 514-B, NEMA FB-1, 3/8 Inch Thick

Category: Steel Conduit Locknuts

3-Gang, Screw-On, New/Old Work, Switch/Outlet Box, Non-Metallic, Depth: 3-1/2". Cubic Inches: 61".

Category: Non-Metallic New Work Switch / Outlet Boxes

3/4" Diameter, Reduced Wall Steel Conduit, Metallic, Hot Dipped Zinc Galvanized Low Carbon Steel, 100 feet Coil.

Category: Flexible Steel Conduit

Rigid Strut Strap, 3", Material: Steel, Finish: Zinc Gold

Category: Strut Channel Rigid Conduit Clamps

Professional Use Premium Vinyl Electrical Tape, Super 33+, Unprinted. Size: 3/4" Width, 20' Length. Thickness: 7 mils. Voltage Rating: 600V. Temperature Rating: 221°F. Color: Black.

Category: Premium Professional Use Vinyl Electrical Tape

3 Amp Fast-Acting Fuse, Electronic, Ceramic Tube, 1/4 Inch x 1-1/4 Inch (63 mm x 32 mm), 250 Volt AC, 125 Volt DC, Nickel-Plated Brass Endcaps, Rejection Endcaps, RoHS

Category: Electronic Fast Acting Fuses

Barrier Power Terminal Block, 600 V, 310 A, 3 Poles, 6 AWG to 350 kcmil Wire, Thermoplastic

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

Cord Grip Connector Kit, 3/4 Inch Diameter, Cord Range 0.125 - 0.880 Inch, Steel With Zinc Chromate Finish

Category: Straight Steel Cord Grips

Hole Saw, Carbide Tipped, Diameter: 1-3/8", Chuck Size: 3/8", Conduit Size: 1", Maximum Cutting Depth: 8 GA

Category: Carbide Tipped Hole Saws

OZ-Gedney Type GUAT Conduit Outlet Box, Number Of Outlet: 3, Malleable Iron Body, Copper-Free Aluminum Cover, Size: 3/4 IN, Cable Entry: (3) 3/4 IN Hubs, 15 CU-IN Capacity, No, 3 IN Cover Opening, Finish: Zinc Electroplated With Aluminum Enamel, 3-5/8 IN Width, 2-1/8 IN Depth, 3-5/8 IN Height, NEMA Rating: NEMA 4, 7CD, 9EFG, Third Party Certification: UL File Number E-30513, Class I, Division 1, 2, Groups C, D, Class I, Zone 1, 2, Groups IIA, IIB, Class II, Division 1, 2, Groups E, F, G, Class III, CSA 020945, Applicable Third Party Standards: UL 886, CSA C22.2 Number 30, NEC Articles 500-503 And 505, Military Specification Mil-F-28675, Federal Specification A-A-50563, For Rigid Conduit And IMC

Category: Explosion-Proof T Conduit Outlet Boxes

Switch Box with Plaster Ears, 3" x 2", 1-Gang, Gangable, Drawn, Metallic. Depth: 3-1/2". Side Knockouts: (6) 3/4". Bottom Knockouts: (1) 1/2". Cubic Inches: 14.0".

Category: Metallic Switch / Outlet Boxes

Conduit Hanger with Bolt, 3/4 Inch, Steel, For Use With Rigid/IMC/EMT to Threaded Rod

Category: Conduit Clamps

3 AWG, THHN/THWN-2, Stranded Copper, 600V, Green, Cut to Length

Category: 3 AWG Stranded Copper THHN

Spade Bit, Self Feeding, Diameter: 3/4", Hex Shank 1/4"

Category: Spade Bits

Insulated Multi-Cable Connector Block, Wire Entry One Side, 600V, Number of Ports: 3, Wire Range: 6 AWG - 3/0 AWG, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Single Sided Entry Wire Connector Blocks

Multi-Tap Connector, Aluminum, Insulated, 3 Port, 2 Sided Entry, 14 to 4 AWG, 600 Volt, AL/CU Rated

Category: Dual Sided Entry Wire Connector Blocks

3 Amp Time-Delay Ceramic Fuse, 1/4" x 1-1/4", 250V, RoHS

Category: Electronic Time Delay Fuses

SHOCKWAVE Impact Duty™ Driver Bit Set - 80PC, Includes: (1) SHOCKWAVE™ Compact Magnetic Bit Holder, (1) TORX® Bit 1" T10, (1) TORX® Bit 1" T15, (3) Square Bit 1" SQ2, (4) Phillips Bit 1" P2, (1) Phillips Bit 1" P1, (1) Phillips Bit 3-1/2" P2, (1) Square Bit 3-1/2" SQ2, (1) Hex Bit 1" 1/8", (1) Hex Bit 1" 3/16", (1) Hex Bit 1" 3/32", (1) Hex Bit 1" 5/32", (1) Hex Bit 1" 7/64", (1) Hex Bit 1" 9/64", (1) Insert 1/4" Nut Driver, (1) Insert 3/8" Nut Driver, (1) Insert 5/16" Nut Driver, (1) P2/SQ2 Double Ended Bit, (1) P2/T25 Double Ended Bit, (2) Phillips Bit 1" P3, (1) Hex3mm 312 Power Groove Bit, (1) Hex4mm 312 Power Groove Bit, (1) Square Bit 1" SQ1, (1) Hex5mm 312 Power Groove Bit, (1) Square Bit 1" SQ3, (1) TORX® Bit 1" T27, (3) Phillips Bit 2" P2, (3) Phillips Bit 2" P3, (1) Slotted 1" #10 Bit, (1) Phillips Bit 1" PR2, (1) Square Bit 2" SQ2, (1) Square Bit 2" SQ3, (1) TORX® Bit 2" T20, (1) TORX® Bit 2" T25, (3) TORX® Bit 1" T20, (5) TORX® Bit 1" T25, (1) TORX® Bit 1" T30, (1) 1/4" Magnetic Nut Driver, (1) 3/8" Magnetic Nut Driver & (1) 5/16" Magnetic Nut Driver

Category: Drill Bit Sets

Conduit Clamp, 3/4 Inch Diameter, Pre-Assembled, Steel With Zinc Finish, For Use With EMT Conduit

Category: Strut Channel EMT Conduit Clamps

Chase Nipple, 3/4 Inch, Zinc Die Cast, For Use With a Conduit Coupling to Connect Conduit to a Box, or With a Locknut to Connect Two Boxes

Category: Zinc Die Cast Chase Nipples