"wiremold"

For Transitioning From 2900 Series Raceway To 2800 Series Raceway.

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

W-mold 2818fo-wh Ext Elbow Fo c5 White

Category: 1-Piece Non-Metallic Raceway Elbows

For covering single receptacles - 1.59" (40mm) diameter. White

Category: 1-Gang Raceway Box Covers & Faceplates

Replacement trim flange and decorative cover assembly for the EFSB2 and EFSB4 wall boxes. Trim flange and cover are finished in a decorative white color, with a paintable surface to match any room décor.

Category: Recessed Compartment Box Covers

Two sections of a two-compartment (power and communication) pole (5'4" (1.626m) base + 5' (1.524m) extender) assembles to form a 10' 4" (3.148m) pole. Nominal material thickness .040" (1.0mm). Ivory or gray boot base. Factory wired with fed-spec general grade 20A 125V duplex style receptacles. An 8" (203mm) cover at top front (power side) of pole is removable for making power wiring connections. KOs provided in removable cover for RJ11/RJ45 and modular furniture communication connectors. Mounting hardware, entrance end plate and two ceiling trim plates furnished.

Category: Tele-Power Pole Mounting Kits

<p>Device plate accepts up three (3) standard Mosaic devices (45mm x 22.5mm). Devices supplied by others.</p>

Category: Recessed Compartment Boxes

To attach 525 Series Service Fittings on top of preset. Aluminum finish only. Dimensions are 9 3/16" x 6 1/16" [233mm x 154mm]. Fits all 525 Series Service Fittings.

Category: Square / Rectangle Recessed Box Covers

Die-cast aluminum construction with stamped steel bottom plate. Includes 3 duplex receptacle plates, 1 center communication plate and

Category: Round Recessed Floor Boxes

Floor Box Assembly, Furniture Feed, Diameter: 4 Inch, (2) 1/2 Inch and (1) 3/4 Inch Conduit Openings, (3) 1/2 Inch Knockouts, Material/Finish: Aluminum/Aluminum, For Use in Raised Floor or Wood Floor Applications.

Category: Assembled Recessed Round Boxes

Floor Box Assembly, 1-Gang, Nickel. Includes Device Plate with Two Openings and (1) Screw Plug

Category: Assembled Recessed Gang Boxes

WMD 6CFFTCBZ 6IN FURNITURE FE

Category: Poke-Through Cover Assemblies

Mounts devices spaced 12" (305mm) on center using 4047 Series device plates. Ivory

Category: Large 2-Piece Metallic Raceway Covers

WMD ECB2SP-RLNK CEILING BOX R

Category: Media Center Enclosures with Covers

Surface Style Cover with Floor Insert, Flange, Tamper-Resistant, Material/Finish: Die Cast Aluminum/Bronze

Category: Square / Rectangle Recessed Box Covers

Includes one prewired 20A duplex receptacle which can be wired as a standard receptacle or isolated ground. Finish flange available in gray (GY), black (BK), ivory (VY), brushed aluminum (AL), and brass finish (BS). Aluminum and brass flanges standard with black cover. Aluminum flange also available with an aluminum colored nonmetallic cover (AA). Brass flange also available with a brass colored nonmetallic cover (AB). Includes one adpater to accept Legrand AVIP or Extron Electronics MAAP mini a

Category: Assembled Poke-Through Units

For branches of raceway running at right angles. 1" [25mm] bend radius.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

RFB4-4BB BRKT W/ONE ORT BEZEL

Category: Recessed Floor Box Service Fittings

Receptacle opening 1 9/16" [40mm]. Fits into any one (1) of the shaded areas shown.

Category: Recessed Floor Box Service Fittings

Single-gang, blank.

Category: Poke-Through Mounting Plates

RC9 ALL COMM PT BS FLANGE / BS CTR

Category: Assembled Poke-Through Units

WMD RC9CTCAL P-THRU CVRGY FLA

Category: Poke-Through Cover Assemblies

WMD S1ER318 EXT RING

Category: Metallic Ceiling Support Boxes

WMD CM-SFP-WH CM SERIES SINGL

Category: 1-Gang Raceway Device Brackets & Plates

CRFB SINGLE REC COMM PLATE LOC 4

Category: Recessed Compartment Box Device Plates