Conduit Bodies - PVC Coated

ROB PRLL97SA 3-1/2 AL FORM 7 LL FITTING

Category: PVC Coated Type LL Conduit Bodies

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type T Conduit Bodies

RRY PR989 3-1/2 - 4 MARK 9 C

Category: PVC Coated Conduit Body Covers

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type T Conduit Bodies

ROB PRC889 3 AL MARK 9 C FITTING

Category: PVC Coated Type C Conduit Bodies

ROB PRBUB9 3-1/2 BUB FITTING MOGUL

Category: PVC Coated Type C Conduit Bodies

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type TB Conduit Bodies

Plasti-bond Conduit Bodies With Covers Are Offered In Form 8 And Form 7 Styles,each With Numerous Configurations To Provide A Complete Coated Conduit System. May Be Used To Make 90° Bends, For Pull Outlets, To Provide For Taps Or Splices, To Act As A Mounting Outlet For Wiring Devices Or Lighting Fixtures Etc. Electrical Continuity Of The Conduit System Is Maintained Across Assembled Joints.

Category: PVC Coated Type LB Conduit Bodies

Rob-r Prt29 3/4 Al Mark 9 T F

Category: PVC Coated Type T Conduit Bodies

Plasti-bond Pulling Elbows Are Used At 90° Bends In Conduit Runs To Allowstraight Pulls At Bends, To Serve As Pull Outlets For Stiff Conductors, To Allowfor Service Entrance Into Buildings Or To Allow Conductor Entrance Into Motors.electrical Continuity Of The Conduit System Is Maintained Across Assembled Joints.

Category: PVC Coated Type LB Conduit Bodies

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LB Conduit Bodies

PVC coated Form 8 conduit bodies with covers are offered in numerous configurations to provide a complete coated conduit system.Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Conduit Body Covers

ROB PRLR789 2-1/2 AL MARK 9 LR FITTING

Category: PVC Coated Type LR Conduit Bodies

ROB PRBG98SA 3-1/2 - 4 BG COVER MOGUL AL

Category: PVC Coated Conduit Body Covers

ROB PRLL29 3/4 AL MARK 9 LL FITTING

Category: PVC Coated Type LL Conduit Bodies

ROB PRLB97SA 3-1/2 AL FORM 7 LB FITTING

Category: PVC Coated Type LB Conduit Bodies

Rob-r Prh580f 1-1/2 Form 8 Co

Category: PVC Coated Conduit Body Covers

PCP PMLB87 3 FORM 7 LB FITTING

Category: PVC Coated Type LB Conduit Bodies

Perma-Cote, Conduit Body And Cover, Form: C Form 7, Width: 1.640 IN, Length: 7.500 IN, Height: 1.670 IN, Material: Ferrous Body, Stainless Screw, Finish: 40 MIL Gray PVC Exterior Coating, 2 MIL Green Urethane Interior Coating, Pipe Size: 3/4 IN, Dimension D: 1.130 IN, Dimension E: 3.810 IN

Category: PVC Coated Type C Conduit Bodies

PCP PMT77 2-1/2 FORM 7 T FITTING

Category: PVC Coated Type T Conduit Bodies

1-1/2 PVC-CT MOGCONDBDY

Category: PVC Coated Type C Conduit Bodies

Conduit Body Cover, Mogul Style, Size: 3-1/2 inch, Material: Aluminum

Category: PVC Coated Conduit Body Covers

Perma-Cote conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a

Category: PVC Coated Type T Conduit Bodies

PCC T28-PVC-CT-3/4 BODY&CVR

Category: PVC Coated Type T Conduit Bodies