Search results

Rob-r Prll107 4 Form 7 Ll Fit

Category: PVC Coated Type LL Conduit Bodies

Rob-r Prssp250 2-1/2 Split Co

Category: PVC Coated Split Couplings

Rob-r Prt87sa 3 Al Form 7 T Fitting

Category: PVC Coated Type T Conduit Bodies

Rob-r Prxjg84 3 Expansion Joint

Category: PVC Coated Expansion Couplings

RRY PRHNIP12X12

Category: PVC Coated Nipples

3 Mall 1 Hole Pipe Strap

Category: PVC Coated 1-Hole Conduit Straps

Plasti-bond Conduit Bodies With Covers Are Offered In Form 8 And Form 7 Styles,each With Numerous Configurations To Provide A Complete Coated Conduit System. May Be Used To Make 90° Bends, For Pull Outlets, To Provide For Taps Or Splices, To Act As A Mounting Outlet For Wiring Devices Or Lighting Fixtures Etc. Electrical Continuity Of The Conduit System Is Maintained Across Assembled Joints.

Category: PVC Coated Type LR Conduit Bodies

Rry Pbc212 21/2" Pb Strap

Category: PVC Coated Conduit Support Straps

Plasti-bond Unf Unions Are Used To Connect Conduit To Conduit Or To Allow For Future Changes To The Conduit System. Female Threads Are Provided At Each End. Plasti-bond Uny Unions Are Used To Connect Conduit To A Conduit Fitting, Junction Box, Or Device Enclosure. One End Is A Male Thread And The Other Is Female.

Category: PVC Coated Female-Female Unions

ROB PBPAR-3 3 PARALLEL BEAM CLAMP

Category: PVC Coated Parallel Beam Clamps

ROB PRTB39 1 AL MARK 9 TB FITTING

Category: PVC Coated Type TB Conduit Bodies

PVC Coated Aluminum Form 9 Type LL Conduit Body, 4" Hub

Category: PVC Coated Type LL Conduit Bodies

ROB PRNIP-AL-2XCL 2XCLOSE AL NIPPLE

Category: PVC Coated Nipples

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

ROB PRNIP-AL-1-1/4X2 1-1/4X2 AL NIPPLE

Category: PVC Coated Nipples

Liquidtight Connector, 45° Angle, Size: 4 inch, Material: PVC Coated Steel.

Category: 45 Degree PVC Coated Type LT Connectors

Plasti-Bond pulling elbows are used at 90 degree bends in conduit runs to allow straight pulls at bends, to serve as pull outlets for stiff conductors, to allow for service entrance into buildings or to allow conductor entrance into motors. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LB Conduit Bodies

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LR Conduit Bodies

"Plasti-Bond liquid tight connectors are used with liquid tight conduit to wire motors, transformers, processing equipment, pumps, etc. The flexible conduit and the PVC coated connector work together to seal out water and other corrosive liquids, protecting the conductors from damage.

Category: 45 Degree PVC Coated Type LT Connectors

"plasti-bond El Style Malleable Elbows Are Used In A Conduit Run To Change Direction 90° Or To Terminate At A Fitting Or Box. They Are Available With Malethreads Only, Female Threads Only, Or Male And Female Threads.

Category: 90 Degree PVC Coated Type LT Connectors

Conduit Hub with Ground Screw, Size: 4 inch, Material: PVC Coated Steel.

Category: PVC Coated Conduit Hubs with Ground

Conduit Body, Type: T, FM8, Size: 3 inch, Material: PVC Coated Iron. Includes: Cover & Gasket.

Category: PVC Coated Type T Conduit Bodies

Rob-r Prh480f 1-1/4 Form 8 Co

Category: PVC Coated Conduit Body Covers

ROB PREYD26 3/4 M/F SEALING FITTING W/DRN

Category: PVC Coated Type EYD Sealing Fittings