"14/2 nm-b"

PVC Coated Conduit Body, T Shape, Mark 9, Size 1/2 Inch/16 Metric, Aluminum, Dark Gray

Category: PVC Coated Type T Conduit Bodies

PVC Coated Conduit Nipple, 1-1/4 Inch/35 Metric Pipe Size x 4 Inch/101.6 Millimeters Nipple Length, Nominal .002 Inch (2 mil) Blue Urethane on Interior, Minimum .040 Inch (40 mil) PVC Coating on Exterior, Blue Urethane Coating Over Threads, Hot-Dip Galvanized Rigid Steel, Gray

Category: PVC Coated Nipples

THB LB98 3-1/2INCH CONDUIT BO

Category: PVC Coated Type LB Conduit Bodies

Plasti-bond Xjg Type Expansion Joints Are Used To Connect Two Lengths Of Conduit subject To Longitudinal Movement, Including That Caused In Long Runs By Thermal expansion And Contraction.

Category: PVC Coated Type X Conduit Bodies

Perma-cote Conduit Bodies With Covers Are Offered In Form 8 And Form 7 Styles, Each With Numerous Configurations To Provide A Complete Coated Conduit System. May Be Used To Make 90degree Bends, For Pull Outlets, To Provide For Taps Or Splices, To Act As A

Category: PVC Coated Type C Conduit Bodies

Perma-cote; Connector; 45 Deg; Size: 3/4 In Pipe; Material: Ferrous Body; Finish: 40 Mil Gray Pvc Exterior Coating, 2 Mil Green Urethane Interior Coating; Dimension B: 2.880 In; Dimension A: 1.740 In; Dimension C: 0.560 In

Category: 45 Degree PVC Coated Type LT Connectors

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type T Conduit Bodies

ROB PRHNIP-3-1/2XCL 3-1/2XCLOSE NIPPLE

Category: PVC Coated Nipples

Perma-Cote, Connector, Straight, Size: 3/4 IN Pipe, Material: Ferrous Body, Finish: 40 MIL Gray PVC Exterior Coating, 2 MIL Green Urethane Interior Coating, Dimension B: 2.380 IN, Dimension A: 1.740 IN, Dimension C: 0.560 IN

Category: Straight PVC Coated Type LT Connectors

2X12 NIPPLE

Category: PVC Coated Nipples

Perma-Cote conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a

Category: PVC Coated Type T Conduit Bodies

EYS Sealing Fitting, Male/Female, Vertical or Horizontal, Diameter 1-1/4 Inch, PVC Aluminum

Category: PVC Coated Type EYS Sealing Fittings

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type C Conduit Bodies

Plasti-Bond reducing couplings are used to connect two pieces of conduit of different size. They are available in 17 different size combinations."

Category: PVC Coated Couplings

Plasti-Bond liquid tight connectors are used with liquid tight conduit to wire motors, transformers, processing equipment, pumps, etc. The flexible conduit and the PVC coated connector work together to seal out water and other corrosive liquids, protecting the conductors from damage."

Category: Straight PVC Coated Type LT Connectors

Plasti-bond Xjg Type Expansion Joints Are Used To Connect Two Lengths Of Conduit subject To Longitudinal Movement, Including That Caused In Long Runs By Thermal expansion And Contraction.

Category: PVC Coated Type X Conduit Bodies

"Plasti-Bond OE Series Conduit Outlet Boxes are installed in hazardous location conduit systems to serve as pulling and splicing fittings, to connect runs of conduit, to change the direction of a conduit run, or to provide access to conductors. They are provided with covers. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LB Conduit Bodies

1/2 INCH FEM SEAL.FTG ALUM VERT XP

Category: PVC Coated Type EYS Sealing Fittings

Perma-Cote, Hub, EYA - Female, Pipe Size: 1 IN, Dimension A: 6.310 IN, Dimension B: 1.830 IN, Finish: 40 MIL Gray PVC Exterior Coating, 2 MIL Green Urethane Interior Coating, Material: Ferrous Body, Turning Radius: 1.380 IN

Category: PVC Coated Type EYS Sealing Fittings

Perma-Cote, Conduit Body And Cover, Material: Ferrous Body, Plastic Encapsulated Stainless Steel Screw, Form: C Form 8, Length: 7.780 IN, Height: 1.730 IN, Width: 1.270 IN, Finish: 40 MIL Gray PVC Exterior Coating, 2 MIL Green Urethane Interior Coating, Pipe Size: 3/4 IN, Dimension D: 1.190 IN, Dimension E: 3.940 IN, Includes: Screw

Category: PVC Coated Type C Conduit Bodies

Plasti-Bond reducing couplings are used to connect two pieces of conduit of different size. They are available in 17 different size combinations."

Category: PVC Coated Couplings

Perma-Cote, Conduit Body And Cover, Form: LL Form 8, Length: 6.350 IN, Height: 1.730 IN, Width: 2.350 IN, Material: Ferrous Body, Plastic Encapsulated Stainless Steel Screw, Finish: 40 MIL Gray PVC Exterior Coating, 2 MIL Green Urethane Interior Coating, Pipe Size: 3/4 IN, Dimension D: 1.190 IN, Dimension E: 3.940 IN, Includes: Screw

Category: PVC Coated Type LL Conduit Bodies

Perma-cote Conduit Bodies With Covers Are Offered In Form 8 And Form 7 Styles, Each With Numerous Configurations To Provide A Complete Coated Conduit System. May Be Used To Make 90degree Bends, For Pull Outlets, To Provide For Taps Or Splices, To Act As A

Category: PVC Coated Type T Conduit Bodies

Perma-cote Conduit Bodies With Covers Are Offered In Form 8 And Form 7 Styles, Each With Numerous Configurations To Provide A Complete Coated Conduit System. May Be Used To Make 90degree Bends, For Pull Outlets, To Provide For Taps Or Splices, To Act As A

Category: PVC Coated Type LB Conduit Bodies