"14/2 nm-b"

PCP PM4Q9100T 1 90 LT CONNECTOR

Category: 90 Degree PVC Coated Type LT Connectors

PCP PMLL100 1 FORM 8 LL FITTING

Category: PVC Coated Type LL Conduit Bodies

ROB PR5355GR 1-1/4 90 LT CONN W/GRND

Category: 90 Degree PVC Coated Type LT Connectors

PCP PMEY-100 1 F/F SEALING FITTING

Category: PVC Coated Type EYS Sealing Fittings

ROB PREL49 1-1/4 MALLEABLE 90 FEM/FEM ELBOW

Category: 90 Degree PVC Coated Type LT Connectors

ROB PRHNIP-3XCL 3XCLOSE NIPPLE

Category: PVC Coated Nipples

ROB PRNIP-AL-1X8 1X8 AL NIPPLE

Category: PVC Coated Nipples

ROB PREYD86SA 3 AL EYD SEALING FITTING

Category: PVC Coated Type EYD Sealing Fittings

PVC coated Mark 9 conduit bodies covers are offered separately for convenient maintenance or installation when the replacement of entire bodies are not necessary.

Category: PVC Coated Conduit Body Covers

ROB PRLBD4400SA 1-1/4 AL PULLLING ELBOW

Category: PVC Coated Type LB Conduit Bodies

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

Rob-r Prstag8 3 Al Knockout H

Category: PVC Coated Conduit Hubs with Ground

Plasti-bond Xjg Type Expansion Joints Are Used To Connect Two Lengths Of Conduit subject To Longitudinal Movement, Including That Caused In Long Runs By Thermal expansion And Contraction.

Category: PVC Coated Type X Conduit Bodies

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type X Conduit Bodies

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

ROB PRNIP-AL-2X12 2X12 AL NIPPLE

Category: PVC Coated Nipples

Plasti-Bond PVC coated beam clamps are used to securely support conduit runs by attaching them to beams, angles, trusses and other structural members. Parallel : to attach the conduit run parallel to a beam or structural member.

Category: PVC Coated Parallel Beam Clamps

ROB PRLL49 1-1/4 AL MARK 9 LL FITTING

Category: PVC Coated Type LL Conduit Bodies

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type X Conduit Bodies

ROB PRC49 1-1/4 AL MARK 9 C FITTING

Category: PVC Coated Type C Conduit Bodies

Plasti-Bond ST style knockout hubs are used to terminate conduit runs through the wall of a sheet metal electrical enclosure. They are available with or without grounding lug. STTB style hubs are "Through-Bulkhead" fittings used to pass conduit runs through firewalls or bulkheads up to 1/8" thick. STTTB style hubs perform the same function for unlimited wall thicknesses, (furnished without nipples).

Category: PVC Coated Conduit Hubs

ROB PB500 5/16 HANGER ROD BEAM

Category: PVC Coated Beam Clamps

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples