PVC Coated Fittings

ROB PRREC31SA 1 - 1/2 AL REDUCING COUPLING

Category: PVC Coated Couplings

ROB PRBUB4 1-1/4 BUB FITTING MOGUL

Category: PVC Coated Conduit Body Covers

ROB PRLL789 2-1/2 AL MARK 9 LL FITTING

Category: PVC Coated Type LL Conduit Bodies

ROB PRNIP-AL-1-1/2X6 1-1/2X6 AL NIPPLE

Category: PVC Coated Nipples

ROB PRX17SA 1/2 AL FORM 7 X FITTING

Category: PVC Coated Type X Conduit Bodies

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

ROB PBRA-3-1/2 3-1/2 RA BEAM CLAMP W/COATED STEEL U-BOLT

Category: PVC Coated Right Angle Beam Clamps

ROB PRLL19 1/2 AL MARK 9 LL FITTING

Category: PVC Coated Type LL Conduit Bodies

ROB PRNIP-AL-2X4 2X4 AL NIPPLE

Category: PVC Coated Nipples

"Plasti-Bond liquid tight connectors are used with liquid tight conduit to wire motors, transformers, processing equipment, pumps, etc. The flexible conduit and the PVC coated connector work together to seal out water and other corrosive liquids, protecting the conductors from damage.

Category: 90 Degree PVC Coated Type LT Connectors

ROB PRNIP-AL-1X4 1X4 AL NIPPLE

Category: PVC Coated Nipples

ROB PR5237AL 2 STRAIGHT LT CONN AL

Category: Straight PVC Coated Type LT Connectors

ROB PRHNIP-1X5 1X5 NIPPLE

Category: PVC Coated Nipples

ROB PRREC43SA 1-1/4 - 1 AL REDUCING COUPLING

Category: PVC Coated Couplings

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LR Conduit Bodies

Plasti-Bond ST style knockout hubs are used to terminate conduit runs through the wall of a sheet metal electrical enclosure. They are available with or without grounding lug. STTB style hubs are "Through-Bulkhead" fittings used to pass conduit runs through firewalls or bulkheads up to 1/8" thick. STTTB style hubs perform the same function for unlimited wall thicknesses, (furnished without nipples).

Category: PVC Coated Conduit Hubs with Ground

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

ROB PRSSP400 4 SPLIT COUPLING

Category: PVC Coated Split Couplings

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LR Conduit Bodies

ROB PR5254GRAL 1 90 LT CONN W/GRN AL

Category: 90 Degree PVC Coated Type LT Connectors

ROB PRNIP-AL-1X2 1X2 AL NIPPLE

Category: PVC Coated Nipples

ROB PRLR39 1 AL MARK 9 LR FITTING

Category: PVC Coated Type LR Conduit Bodies

ROB PBRA-3 3 RA BEAM CLAMP W/COATED STEEL U-BOLT

Category: PVC Coated Right Angle Beam Clamps

ROB PR5240AL 4 STRAIGHT LT CONN AL

Category: Straight PVC Coated Type LT Connectors