PVC Coated Fittings

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

ROB PRREC602 2 - 3/4 REDUCING BUSHING

Category: PVC Coated Couplings

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as w

Category: PVC Coated Nipples

Perma-Cote liquid tight connectors are used with liquid tight conduit to wire motors, transformers, processing equipment, pumps, etc. The flexible conduit and the PVC coated connector work together to seal out water and other corrosive liquids, protecting

Category: 90 Degree PVC Coated Type LT Connectors

Plasti-Bond ST style knockout hubs are used to terminate conduit runs through the wall of a sheet metal electrical enclosure. They are available with or without grounding lug. STTB style hubs are "Through-Bulkhead" fittings used to pass conduit runs through firewalls or bulkheads up to 1/8" thick. STTTB style hubs perform the same function for unlimited wall thicknesses, (furnished without nipples).

Category: PVC Coated Conduit Hubs

Rob-r Pr5354gr 1 90 Lt Conn W

Category: 90 Degree PVC Coated Type LT Connectors

RRYPRLBD2200SA 3/4 Inch LBD Aluminum Pulling Elbows

Category: PVC Coated Type LB Conduit Bodies

ROB-R PRXJG64SA 2 AL EXPANSION

Category: PVC Coated Expansion Couplings

ROB PRT1089 4 AL MARK 9 T FITTING

Category: PVC Coated Type T Conduit Bodies

Perma-cote Conduit Bodies With Covers Are Offered In Form 8 And Form 7 Styles, Each With Numerous Configurations To Provide A Complete Coated Conduit System. May Be Used To Make 90degree Bends, For Pull Outlets, To Provide For Taps Or Splices, To Act As A

Category: PVC Coated Type LB Conduit Bodies

RRYPRHNIP312X12

Category: PVC Coated Nipples

Rob-r Prx67sa 2 Al Form 7 X F

Category: PVC Coated Type X Conduit Bodies

Plasti-bond Xjg Type Expansion Joints Are Used To Connect Two Lengths Of Conduit subject To Longitudinal Movement, Including That Caused In Long Runs By Thermal expansion And Contraction.

Category: PVC Coated Type X Conduit Bodies

Plasti-bond Xjg Type Expansion Joints Are Used To Connect Two Lengths Of Conduit subject To Longitudinal Movement, Including That Caused In Long Runs By Thermal expansion And Contraction.

Category: PVC Coated Type X Conduit Bodies

Robroy Prtb47sa 1 1/4" Pvc coated Alum Form 7 Tb Condulet

Category: PVC Coated Type TB Conduit Bodies

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type T Conduit Bodies

ROB PB508 2-1/8 HANGER ROD BEAM

Category: PVC Coated Beam Clamps

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

ROB PR5257AL 2 90 LIQUID TIGHT CONN AL

Category: 90 Degree PVC Coated Type LT Connectors

ROB PRHNIP-3-1/2X4 3-1/2X4 NIPPLE

Category: PVC Coated Nipples

ROB PRHNIP-1-1/2X8 1-1/2X8 NIPPLE

Category: PVC Coated Nipples

ROB PRHNIP-3-1/2XCL 3-1/2XCLOSE NIPPLE

Category: PVC Coated Nipples

ROB PR5234GRAL 1 STRAIGHT LT CONN W/GRN AL

Category: Straight PVC Coated Type LT Connectors

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LR Conduit Bodies