"14/2 nm-b"

3 Mall 1 Hole Pipe Strap

Category: PVC Coated 1-Hole Conduit Straps

Conduit Body, Type: LL, FM7, Size: 3 inch, Material: PVC Coated Aluminum. Includes: Cover & Gasket.

Category: PVC Coated Type LL Conduit Bodies

Conduit Body, Type T, Size: 3/4 Inch, Form 7, Steel/PVC Coated

Category: PVC Coated Type T Conduit Bodies

PVC coated Mark 9 conduit bodies covers are offered separately for convenient maintenance or installation when the replacement of entire bodies are not necessary.

Category: PVC Coated Conduit Body Covers

ROB PRCPLG-AL-6 6 AL COUPLING

Category: PVC Coated Couplings

Plasti-Bond pulling elbows are used at 90 degree bends in conduit runs to allow straight pulls at bends, to serve as pull outlets for stiff conductors, to allow for service entrance into buildings or to allow conductor entrance into motors. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LB Conduit Bodies

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LR Conduit Bodies

"Plasti-Bond liquid tight connectors are used with liquid tight conduit to wire motors, transformers, processing equipment, pumps, etc. The flexible conduit and the PVC coated connector work together to seal out water and other corrosive liquids, protecting the conductors from damage.

Category: 45 Degree PVC Coated Type LT Connectors

ROB PRTB39 1 AL MARK 9 TB FITTING

Category: PVC Coated Type TB Conduit Bodies

PCP PMST-4 1-1/4 KNOCKOUT HUB

Category: PVC Coated Conduit Hubs

ROB PRBUB10SA 4 AL BUB FITTING MOGUL

Category: PVC Coated Conduit Body Covers

ROB PRNIP-AL-3/4X3 3/4X3 AL NIPPLE

Category: PVC Coated Nipples

ROB PRNIP-AL-2XCL 2XCLOSE AL NIPPLE

Category: PVC Coated Nipples

Liquidtight Connector, 45° Angle, Size: 4 inch, Material: PVC Coated Steel.

Category: 45 Degree PVC Coated Type LT Connectors

Plasti-Bond OE Series Conduit Outlet Boxes are installed in hazardous location conduit systems to serve as pulling and splicing fittings, to connect runs of conduit, to change the direction of a conduit run, or to provide access to conductors. They are provided with covers. Electrical continuity of the conduit system is maintained across assembled joints."

Category: PVC Coated Type T Conduit Bodies

"Plasti-Bond liquid tight connectors are used with liquid tight conduit to wire motors, transformers, processing equipment, pumps, etc. The flexible conduit and the PVC coated connector work together to seal out water and other corrosive liquids, protecting the conductors from damage.

Category: 90 Degree PVC Coated Type LT Connectors

PCP PM142-G 3/4 CLAMP BACK SPACER

Category: PVC Coated Spacers

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

3/4 AL EYD SEALING FITTING

Category: PVC Coated Type EYD Sealing Fittings

ROB PBPAR-3 3 PARALLEL BEAM CLAMP

Category: PVC Coated Parallel Beam Clamps

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

RRY PRC39 1 AL MARK 9 C FITTI

Category: PVC Coated Type C Conduit Bodies

ROB PRNIP-AL-3X4 3X4 AL NIPPLE

Category: PVC Coated Nipples

ROB PRNIP-AL-2X5 2X5 AL NIPPLE

Category: PVC Coated Nipples