Search results

TS SYSTEM CHASSIS F/800MM HOR

Category: Rack Mounting Kits & Hardware

Baying brackets, for TS/TS, TS/PS, material: Sheet steel, surface: Zinc-plated, supply includes: Assembly parts, description: For additional stability or if mounting plate brackets, swing frames or busbar supports prevent installation of a baying bracket. Packaging Unit: 4 pc(s).

Category: Rack Mounting Kits & Hardware

Solar Support Rail, Sheet Steel, Zinc-Plated, Suitable for the installation of base isolators, Packaging Unit 4 Pieces

Category: Rack Mounting Kits & Hardware

TS punched rail 18 x 38 mm, material: Sheet steel, supply includes: Assembly screws, description: Installation on the vertical TS enclosure section on the outer mounting level, on the horizontal TS enclosure section and on the base configuration rail for CM. Packaging Unit: 4 pc(s).

Category: Rack Mounting Kits & Hardware

TS punched section with mounting flange, 17 x 73 mm, For the inner mounting level, material: Sheet steel, surface: Zinc-plated, supply includes: Assembly screws, description: Variable, with 5 rows of holes for universal skeleton structures or partial assembly. Simply locate into the TS punchings and secure. Packaging Unit: 4 pc(s).

Category: Rack Mounting Kits & Hardware

Internal Installation Rail for AE/WM Enclosure, Steel, Zinc-Plated

Category: Rack Mounting Kits & Hardware

Combination angle, material: Sheet steel, surface: Zinc-plated, supply includes: Assembly parts, description: For optimum distribution of tensile forces during transportation of bayed enclosures by crane. Packaging Unit: 4 pc(s).

Category: Rack Mounting Kits & Hardware

System support rails, material: Sheet steel, surface: Zinc-plated, supply includes: 2 system support rails (45 x 25 mm), 4 T-head screws M12 x 60 mm, Assembly parts, description: For heavy installed equipment such as transformers. T-head screw and slot in the support rail accommodate all mounting dimensions. Packaging Unit: 2 pc(s).

Category: Rack Mounting Kits & Hardware

SYSTEM CHASSIS TS 0600 BEVELED

Category: Rack Mounting Kits & Hardware

Baying clamp, vertical, for TS/TS, material: Sheet steel, surface: Zinc-plated, supply includes: Assembly parts, description: For mounting on the vertical sections of two TS enclosures. Packaging Unit: 6 pc(s).

Category: Rack Mounting Kits & Hardware

Interconnecting rods, description: Interconnecting rods to extend locking from the main enclosure to the adjacent enclosures of a bayed suite. Packaging Unit: 10 pc(s).

Category: Rack Mounting Kits & Hardware

TS SYSTEM CHASSIS F/600MM HOR

Category: Rack Mounting Kits & Hardware

Mounting angles, 482.6 mm (19Zoll), for TS, L-shaped mounting angle, material: Sheet steel, 2 mm, supply includes: Assembly parts, description: L-shaped mounting angles, also for accommodating server system installation kits. Packaging Unit: 2 pc(s).

Category: Rack Mounting Kits & Hardware

Mounting angles additional fastening attachment, for L-shaped mounting angles, material: Sheet steel, surface: Zinc-plated, supply includes: Assembly parts, description: Counteracts bending of the mounting angles in case of unevenly distributed loads, it is attached directly to 482.6 mm mounting angles and to the punched section with mounting flange fitted in the depth. Packaging Unit: 2 pc(s).

Category: Rack Mounting Kits & Hardware

Baying attachment, vertical, for TS/TS with divider panel, material: Sheet steel, surface: Zinc-plated, supply includes: Assembly parts, description: Only suitable for mounting in conjunction with the angle brackets of the divider panel. Packaging Unit: 8 pc(s).

Category: Rack Mounting Kits & Hardware

SYSTEM BARS 695D

Category: Rack Mounting Kits & Hardware